• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.11A
• /
• pp.844-851
• /
• 2009

Handover is needed in multi-hop relay systems to support mobility. The main purpose of handover is to provide the continuous connection when a MS migrates from the air-interface of one BS to another air-interface provided by another BS. Especially the handover between different systems is essential to next generation network. Vertical Handover technology in Mobile WiMAX MMR system is very useful for operators to introduce to Mobile WiMAX system in an overlaid cell environment. This technology will be applied to technology which hands MRS(Mobile Relay Station) over to different systems for system performance enhancement in Ubiquitous environment overlaid between Micro ce11(Frequency 1,FA1) and Macro cell(Frequency 2,FA2). In this paper, FA1 and FA2 are used in order to perform Vertical Handover of MRS(Mobile Relay Station) according to suggested conditions. interferences from neighboring BS or other sectors of 6 macro cells surrounding center Macro cell are analyzed and throughputs are measured according to suggested conditions.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.9
• /
• pp.1077-1082
• /
• 2007

This paper presents the analysis of the potential ultra-wideband(UWB) interference to WiMAX at 3.5 GHz bands and the mitigation method using transmit power control(TPC) of UWB system. UWB interference effect is evaluated with WiMax's outage probability over UWB density when multiple UWB systems and single WiMAX receiver distribute in unit area of 1$km^2$, When UWB distribution density is 20$devices/km^2$ and the dynamic range of TPC is 30 dB, UWB interference effect with TPC is decreased by 42 % rather than that without mitigation scheme. Finally, we describe that the proposed TPC is an effective method to mitigate UWB interference to WiMAX.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.5A
• /
• pp.341-346
• /
• 2009

M-WiMAX (Mobile-Worldwide Interoperability for Microwave Access) system, which uses OFDM (Orthogonal Frequency Division Multiplexing) technique, is known to be proper for mobile high-speed data transmission system. Nevertheless, M-WiMAX is seriously sensitive to IQ imbalance caused by the LO (Local Oscillator) at the receiver. In this paper, we analyze the effect of IQ imbalance on the system, and then propose a joint optimization scheme that can optimize DFE (Digital Front-end) of mobile modem by combining operation duplicated between AGC (Automatic Gain Control) and the estimation and compensation of IQ imbalance. Simulation results show that the proposed scheme achieves the same performance of the conventional scheme while reducing the complexity of the H/W implementation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.1B
• /
• pp.51-59
• /
• 2011

It is the background that the provision of the mobile WiMAX femtocell trial service of a leading mobile telecommunication service operator using small base stations for indoor mobile broadband services and coverage expansion through eliminations of shadow areas in this paper. The paper presents an analysis result of trial subscribers' usage satisfaction for the mobile WiMAX femtocell service and suggests a market approach strategy of a mobile WiMAX femtocell service based on the analysis result. The interesting influence factors are extracted from wide influence factors suggested by existing research literature related with mobile service usage satisfaction and confined to a system quality, a service quality, and an account structure with consideration for attributes of mobile WiMAX femtocell service under exploring its early stages of service market. And then we analyze impacts of the factors to the mobile WiMAX femtocell service usage satisfaction. As a result, a system quality and an account structure have a tendency to provide considerable impacts to subscribers' usage satisfaction for mobile WiMAX femtocell service which is immature in both its technology and market. Therefore a market approach with the preferential consideration of the two factors will be valid.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.6A
• /
• pp.573-587
• /
• 2007

In this paper, we analyze the adjacent interference between WCDMA and M-WiMAX systems in the 2.6GHz Band under the SISO (Single Input Single Output) configuration. The interference scenarios are characterized into 8 scenarios with different victim and interfering links. Among the 8 scenarios, we find that the most performance loss is observed in the scenarios of victim uplink suffering interference from downlink in both systems. Besides, guard band is applied to mitigate the adjacent interference in all the scenarios. Especially, we reveal that M-WiMAX system is much more sensitive to adjacent interference than WCDMA system due to the lower transmission power. In this paper, we consider the worst interference environment, where interferers always transmit with the maximum power, a loose spectrum mask is adapted, and no additional channel fitters are equipped in both systems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.5
• /
• pp.355-367
• /
• 2013

In the Policy and Charging Control(PCC) architecture of the 3GPP and WiMAX forum, the Policy and Charging Rule Function(PCRF) controls and configures the policies of quality of services(QoS) and accounting to a Policy and Charging Rule Enforcement Function(PCEF). In this paper, we categorize the errors into three types that include a disconnection with peer entity, a delayed or no response and a response with failure result, and propose a scheme to automatically synchronize the data between the PCRF and the PCEF for each type of error. Also, we conduct a quantitative analysis to see how much it can help to maintain the cell capacity of the mobile VoIP service in a WiBro network, which is implemented in Korea according to the standards of WiMAX. We can see that our proposed scheme improves the performances of PCC by preventing the waste of radio resources, the overload of systems, the memory leakage of servers, the system shutdown, and so on. We have validated the scheme by implementation, and reflected it in WiMAX standard documents.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.3A
• /
• pp.269-276
• /
• 2008

In this paper, we analyze the M-WiMAX UL capacity limits under 2-Tier cell layout, considering the effects of random user position, path loss models, fading channel and adjacent channel interference from WCDMA system. In order to make the analysis approximate to the practical system capacity, we propose a MCS-based capacity analysis method considering the effects of PER requirement and the utilized MCS levels in M-WiMAX system. The proposed MCS-based method is validated through a system-level Monte Carlo simulation. Furthermore, a comparison between the conventional Shannon method and the proposed MCS-based method is presented and the optimum cell radius is suggested.

• Journal of Communications and Networks
• /
• v.14 no.5
• /
• pp.510-517
• /
• 2012

This paper analyzes the performance of voice-over-Internet protocol (VoIP) services in terms of the system throughput, the packet delay, and the signaling overhead in a mobile WiMAX system with a hybrid automatic repeat request (HARQ) mechanism. Furthermore, a queueing analytical model is developed with due consideration of adaptive modulation and coding, the signaling overhead, and the retransmissions of erroneous packets. The arrival process is modeled as the sum of the arrival rate at the initial transmission queue and the retransmission queue, respectively. The service rate is calculated by taking the HARQ retransmissions into consideration. This paper also evaluates the performance of VoIP services in a mobile WiMAX system with and without persistent allocation; persistent allocation is a technique used to reduce the signaling overhead for connections with a periodic traffic pattern and a relatively fixed payload. As shown in the simulation results, the HARQ mechanism increases the system throughput as well as the signaling overhead and the packet delay.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.49 no.1
• /
• pp.35-42
• /
• 2012

This paper is about the implementation of low cost WiMAX remote radio head system with Ethernet instead of optical link. We deployed a simplified frame structure on the data frames transmitted between a basestation and remote radio heads in order to maximize Ethernet link utilization which shows relatively lower maximum throughput compared to that of optical links. In addition, a synchronization mechanism was applied on a basestation and remote radio heads placed on remote sites in order for simultaneous data transmission and reception in all remote radio heads which are essential for proper communication with terminals. These schemes are implemented with FPGA. The results of experiment with a WiMAX Femtocell show that our remote radio head systems efficiently deliver radio frames with proper timing.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.7B
• /
• pp.550-564
• /
• 2012

In this work we propose a new pricing scheme for the wireless Internet services over WiMAX system. First, let us review the characteristics of wireless network which is based on multi-hop relay WiMAX system. Next, we show why usage-based and QoS-aware pricing scheme is needed in the wireless Internet. After that, we propose a theoretical model for the price of multimedia services called a DAP (DiffServ-aware pricing) scheme for the WiMAX multimedia network which takes into account the consumed radio resource of WiMAX system as well as the supported QoS in the IP backbone network. Finally, we present explicit formulae for the packet price, price of consumed radio resource, and price of consumed bytes.