• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.6
• /
• pp.17-23
• /
• 2021

In the present study, a more compact dual-band slot antenna is newly proposed for Wi-Fi application. The proposed antenna is composed of rectangular two stepped slot with open end which can generate standing wave resonance at dual frequency bands and L-type microstrip feed line. The measured impedance bandwidths are 50 MHz(2.412 ~ 2.470 GHz) at low frequency band and 452 MHz(5.451 ~ 5.903 GHz) at high frequency band respectiviely. Furthermore its size of 14 × 21 mm² is reduced by 30% compared to the size of 20 × 21 mm² of a conventional similar compact slot antenna. It has the omni-directional radiation pattern characteristics of a typical dipole antenna on the H-Plane, so it is suitable for commercial wireless network applications such as Wi-Fi.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.6
• /
• pp.1063-1068
• /
• 2022

The modern society has become entry into the information age after the spread of Internet. In the information age, internet was developed from the wired access to the wireless Internet access. When a surge in demand for wireless Internet access, performance and speed of 2.4 and 5GHz band for Wi-Fi which leads to saturation of the communication was significantly fall. Accordingly, the communication of the 6GHz band for Wi-Fi 6E came to be interested. In this paper, we studied the design and fabrication of microstrip patch antenna to be used in wireless communication systems operating at around 6GHz band. To obtain antenna parameters such as patch size, inter patch space, antenna was simulated by HFSS(High Frequency Structure Simulator). From these parameters, slot microstrip patch antenna is fabricated using FR-4 of dielectric constant 4.4. The characteristics of fabricated patch type microstrip antenna were analyzed by network analyzer.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.11
• /
• pp.1472-1480
• /
• 2016

When disasters such as earthquake, flood, typhoon, fire and terrorism are occurred a video management system is required which can shoot video on the disaster site, and send it to a server located in the command center that can grasp at a glance the site conditions. In this paper, to know the performance elements information needed to construct the video management system. we presented a method of configuring an ad hoc network based on Wi-Fi direct communication. And we also evaluated the performance through built of environment for the video management system. The evaluated performance test items are 'packet flow tests according to the video compression ratios and the image sizes', 'packet flow tests according to the distance and traffic tests', 'packet flow tests according to whether LOS or not', and 'performance test of scenarios'.

• 한국정보통신설비학회:학술대회논문집
• /
• 2009.08a
• /
• pp.99-103
• /
• 2009

Recently, as wired and wireless communication services have rapidly developed and multimodal mobile devices which have various characteristics have widely spread, the need for new convergence services increases. The growing population of VoIP technologies and the high communication expense yield that the market of IP based telephony such as WiFi phone and IP phone is substituted for one of the conventional PSTN telephony. With the help of this trend, the wireline network operators desire to find a market in mobile networks. Therefore, they focus on Fixed Mobile Convergence (FMC) service as one of the key factors to accomplish this goal. FMC services are able to provide the mobility of voice services between circuit switched and packet switched networks. IP Multimedia Subsystem (IMS) based Voice Call Continuity (VCC) is one of the schemes to embody FMC services. As Application Server (AS) which has this VCC function provides seamless handover of services between heterogeneous networks, FMC subscribers can communicate seamlessly with others m WiFi domain and COMA domain using WiFi-COMA dual phone. Most of enterprises have already introduced IP network infrastructure and IP-PBX (Private Branch eXchange) for telephony. However, the problems of high communication cost and work inefficiency due to frequent outside jobs or business trips have remained. In order to solve these problems, demands for enterprise FMC services increase. In this paper, we introduce a new IP-PBX based VCC model that can provide seamless handover of voice services between WiFi and COMA networks for enterprise users and we investigate some interworking and security issues between Soft Switch (SSW) and IMS, or between IMSs. In addition, we introduce a new service that can provide the continuity of voice sessions as well as video sessions using Multimedia Session Continuity (MMSC) technology which has evolved from VCC. This service is expected to be one of the next-generation personalized services based on user's context.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.12
• /
• pp.1044-1049
• /
• 2015

In this paper, isolation enhanced antenna using isolating resonator was proposed. Two loop type antennas were designed to operate at Wi-Fi band(2.4~2.5 GHz), in symmetry to the center, and are closely located to each other. In order to enhance isolation characteristics at Wi-Fi bands, isolating resonator was designed between the two loop type antennas. The proposed isolating resonator is a slot type antenna that enhances isolation with the control of the size, and by adjusting the value of capacitor($C_D$) the resonant frequency of the isolating resonator can easily be adjusted to enhance isolation characteristic at the target frequency.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.422-424
• /
• 2010

Recently the car attached many ECUs and entertainment devices to provide the easiness maintenance and driver's convenience. CAN and MOST networks have been used to manage and control those devices in the car. Wireless network also has been established to receive information from external. These days a car navigation system with GPS is being integrated with CAN, MOST and Wireless network. In these circumstances, the car navigation system can have HMI function to integrate and control the car networks' devices. To solve the GPS problems such as positioning errors or losing signals from satellites in the tunnels and urban canyons, this paper designs and implements a method for positioning vehicle by using the sensing data of sensors and Wi-Fi devices based on this integrated environment.

• International Journal of Computer Science & Network Security
• /
• v.23 no.5
• /
• pp.172-178
• /
• 2023

In this paper, performance of autoencoder based OFDM communication systems is compared with IEEE 802.11a Wireless Lan System (Wi-Fi). The proposed autoencoder based OFDM system is composed of the following steps. First, one sub-carrier's transmitter - channel - receiver system is created by autoencoder. Then learning process of the one sub-carrier autoencoder generates constellation map. Secondly, using the plural sub-carrier autoencoder systems, parallel bundle is configured with inserting IFFT and FFT before and after the channel to configure OFDM system. Finally, the receiver part of the OFDM communication system was updated by re-learning process for adapting channel condition such as multipath channel. For performance comparison, IEEE802.11a and the proposed autoencoder based OFDM system are compared. For channel estimation, Wi-Fi uses initial long preamble to measure channel condition. but Autoencoder needs re-learning process to create an equalizer which compensate a distortion caused by the transmission channel. Therefore, this autoencoder based system has basic advantage to the Wi-Fi system. For the comparison of the system, additive random noise and 2-wave and 4-wave multipaths are assumed in the transmission path with no inter-symbol interference. A simulation was performed to compare the conventional type and the autoencoder. As a result of the simulation, the autoencoder properly generated automatic constellations with QPSK, 16QAM, and 64QAM. In the previous simulation, the received data was relearned, thus the performance was poor, but the performance improved by making the initial value of reception a random number. A function equivalent to an equalizer for multipath channels has been realized in OFDM systems. As a future task, there is not include error correction at this time, we plan to make further improvements by incorporating error correction in the future.

• International journal of advanced smart convergence
• /
• v.1 no.2
• /
• pp.59-63
• /
• 2012

The mVoIP service is the technology which focuses on the wireless data service as the IP network having the transmission rate of 100 Mbps classes on the high-speed middle of movement through the WiFi, WiBro and 3G mobile radio communication network, and etc. and is developed. Since 2010, the mVoIP (mobile VoIP) service shows the rapid growth due to 4G-LTE service seriously disclosed from July with the Smart phone and 2,011 it begins to be rapidly popularized. In this research, additionally the mVoIP service industry activation plan is presented with the trends of technology development including the chip-set/module/terminal, etc. based upon local and foreign market trend searchlight through the market demand analysis. The mVoIP service downloads App to the mobile apparatus and or can provide the service as the software through the WiFi network. Therefore, the change which is large in the products development aspect is to be have no. Expected to is being provided as the added service in the case of 4G-LTE as a matter of course, the service deployment where it is based on the market principle and demand needs is needed.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.255-258
• /
• 2011

Wi-Fi is a rapidly spreading communications network with Smart phone's publication, the technology has become Ubiquitous-based core network which is connected to personal computers, laptops, and tablet PC. Wi-Fi can send currently a variety of data standard due to developed wireless LAN communications network. One of Wi-Fi standard protocols, which is IEEE 802.11n, use 2.4GHz and 5GHz band. 2.4GHz band is used for 802.11b/g protocol because wavelength is long, diffraction and receiving distance is enough to connect other device. 5GHz band has more available channels to use than 2.4GHz band, so there is no frequency interference of other wireless device such as Bluetooth, RFID. Moreover, there is low interference between channels due to small users in each bandwidth level. In the thesis, we are going to analyze 802.11a/b/g protocol which has used since the beginning of Wi-Fi protocol and 802.11n protocol which is used lately. Furthermore, we look into development and direction for standardization of the next generation wireless LANs which are 802.11ac and 802.11ad. In addition, we will consider for the security, vulnerabilities and its countermeasure in Wireless LAN.

• The KIPS Transactions:PartC
• /
• v.18C no.4
• /
• pp.265-278
• /
• 2011

The objective of this paper is to analyze and characterize end-to-end packet statistics after modeling and simulation of WiFi (IEEE 802.11g) and WiMAX (IEEE 802.16e) of a virtual wireless network using OPNET Modeler Wireless Suite. Wireless internal and external network simulators such as Remcom's Wireless InSite Real Time (RT) module, WinProp: W-LAN/Fixed WiMAX/Mobile WiMAX, and SMI system, are designed to consider data transfer rate based on wireless propagation signal strength. However, we approached our research in a different perspective without support for characteristic of these wireless network simulators. That is, we will discuss the purpose of a visual analysis for these packets, how to receive each point packets (e.g., wireless user, base station or access point, and http server) through end-to-end virtual network modeling based on integrated wired and wireless network without wireless propagation signal strength. Measuring packet statistics is important in QoS metric analysis among wireless network performance metrics. Clear packet statistics is an especially essential metric in guaranteeing QoS for WiMAX users. We have found some interesting results through modeling and simulation for virtual wireless network using OPNET Modeler Wireless Suite. We are also able to analyze multi-view efficiency through experiment/observation result.