• 한국컴퓨터정보학회논문지
• /
• 제24권5호
• /
• pp.81-91
• /
• 2019

In this study, 3D measurement data of 70 to 85 years old men were analyzed to investigate the body shape characteristics. and the type of the whole body of older men. Through this study, we aimed to provide basic data necessary for making good clothes for elderly men. We analyzed the body shape of elderly males using Korea 's 2015 elderly anthropometric data by SPSS Ver. 24.0. The body shape of older males was classified into four types: 'thin & long inverted triangle with thick legs', 'thick & short inverted triangle with bird legs', 'thick & long triangle with thick legs', 'thick & short triangle with thick legs'. As the age increases, the shoulders are sagging, the progressive reduction of the spine leads to a decrease in height, and the backbone refraction causes a decrease in the anterior center length and an increase in the back length. In addition, as the age increases, the chest circumference decreases and the abdomen and waist circumference increase. Considering these physical changes, it is necessary to set the length of the garment to 2-3cm shorter in the case of the aged layer. Waist and abdomen area are increased, it is considered that it will be necessary to add more margin of 2cm than general silver clothing when setting the margin amount. When setting the length of the upper body, it is considered that the front center length should be reduced and the back length should be increased to keep the bottom level. In this study, only the elderly males aged 70-85 years were included in the analysis of the whole body type. It is significant that the studies so far have been extended to those older than 70 years. Future research will need to be applied to the development of silver clothing through comparison of older men 's body shape in their 60s and 70s.

• 한국CDE학회논문집
• /
• 제4권3호
• /
• pp.259-268
• /
• 1999

In order to reduce the cost of product and save the processing time, optimal nesting of two-dimensional part is an important application in number of industries like shipbuilding and garment making. There have been many studies on finding the optimal solution of two-dimensional nesting. The problem of two-dimensional nesting has a non-deterministic characteristic and there have been various attempts to solve the problem by reducing the size of problem rather than solving the problem as a whole. Heuristic method and linearlization are often used to find an optimal solution of the problem. In this paper, theoretical and practical nesting algorithm for rectangular, circular and irregular shape of two-dimensional parts is proposed. Both No-Fit-Polygon and Minkowski-Sum are used for solving the overlapping problem of two parts and the dynamic programming technique is used for reducing the number search spae in order to find an optimal solution. Also, nesting designer's expertise is complied into the proposed algorithm to supplement the heuristic method.

• 복식
• /
• 제51권8호
• /
• pp.51-60
• /
• 2001

The purpose of this study was to clarify that the obesity and the body cathexis influence on brassiere and girdle attitudes. The data were collected from 263 female college students using questionnaire. The three body types; slim type (37.6%), standard type (55.6%) and obese type (6.8%) were categorized by the obesity. The results could be summarized as follows. 1. The whole body was segmented as 5 parts: leg and hip girths, abdominal & upper arm girth, face & neck, limbs length & stature and breast. The brassiere & girdle attitudes were identified as 4 factors : "avoidance of wearing". "beauty pursuit", "body-making pursuit" and "brand preference". 2. While the body cathexis and appearance interests of the slim type showed highly, those of the obese type showed lowly. 3. While the obesity and appearance interests influenced the brassiere & girdle attitudes excepting "body-making pursuit", the body cathexis: partially influenced them. This study will provide feasible marketing data and implications for activation of foundation garment industries.

• 한국생활과학회지
• /
• 제19권3호
• /
• pp.555-563
• /
• 2010

With recent advances in 3D scanning technology, three-dimensional (3D) patternmaking is becoming a powerful way to develop garments pattern. This technology is now applicable to the made to measure (MTM) system of both ordinary and tightly fitting garments. Although the pattern of fitted clothing has been developed using 3D human data, it is still interesting to develop cycling pants by considering while-cycling body posture and fabric elasticity. This study adopted the Garland's triangle simplification method in order to simplify data without distorting the original 3D scan. Next, the Runge-Kutta method (2C-AN program) was used to develop a 2D pattern from the triangular pixels in the 3D scanned data. The 3D scanned data of four male, university students aged from 21 to 25, was obtained using Whole body scanner (Model WB4, Cyberware, Inc., USA). Results showed the average error of measurement was $4.58cm^2$ (0.19%) for area and 0~0.61cm for the length between the 3D body scanned data and the 2D developed pattern data. This is an acceptable range of error for garment manufacture. Additionally, the 2D pattern developed, based on the 3D body scanned data, did not need ease for comfort or ease of movement when cycling. This study thus provides insights into how garment patterns may be developed for ergonomic comfort in certain special environments.

• 복식
• /
• 제40권
• /
• pp.171-180
• /
• 1998

This is a study on the Men's Underclothes of Renassience Ages. The changes associated with the Tudor regime were sufficiently profound to afect the nature and purpose of underclothes. Ceasing to be merely a layer serving to protect the skin, they now began to assist the external costume of both sexes in expressing class distinction. In order to attract still greater attention, the edge of the shirt was ruffled at the neck, a decoration which soon developed into a separate accessory, the ruff. The waistcoat, which originally was an under-garment, was shown, when the doublet was taken off, en deshabille. Thus we see that for men in the sixteenth century the undergarment was no longer an obscure drudge, but was promoted to serve in the general mode of expressing what the whole costume so extravagantly announced ; and likewise to share in that extreme degree of the social superior. The pinched waist of both sexes was not so much for sex attraction, but to signify social superiority. In the period under considera-tion, then, from the Tudors to the end of the Jacobeans, the new function of underclothes was much the same for both sexes ; to exploit the grandeur of the costume as evidence of rank, and only by that indirect method to add to the wearer's sex attractions.

• 복식
• /
• 제21권
• /
• pp.5-18
• /
• 1993

The purpose of this study is to identify the architectural construction of Balenciaga's works. He was perfectionist in tailoring which was based on architectural thought, and couturier who could design, cut, sew and fit a whole gar-ment. Balenciaga has never followed any fashion trend but his own. He designed from within himself, according to his own sensitivity to fashion. Like Chanel, he mad clothes in which women can be comfortable, move in, and get on and off with a minimum of effort. He ap-plied radical shapes to flattering ends, for his clothes echoed movements and gestures, never determined them. He achieved the perfect harmony between the body and the garment, freeing the spirit of the woman within. Reflec-tion his respect for women, Balenciaga never contorted or restriced their bodies. He did not depend on hoops and petticoats to hold out the skirts of his evening dresses but on well-balanced, architectural construction. Therefore in order to identify the architec-tural consturuction, this study hypothesizes (1) the effect of mass and volume, (2) the ef-fect of weight and support, (3) the effect of complexity and simplicity, (4) the effect of line and rhythm etc. The architectural beauty of form in Balenciaga's works are especially based on simplicity and support.

• Industrial Engineering and Management Systems
• /
• 제14권4호
• /
• pp.372-378
• /
• 2015

In labor-intensive enterprise, such as garment factory, assembly line is widely used as a manufacturing process for reducing costs and production time. However, for the sake of the various working capacity of worker, idle or delay may happen and influence the rear processes. If these unforeseeable delay happened continuously, it may influence the whole manufacturing process and a model, which is called limited-cycle model with multiple periods (LCMwMP), is assumed to evaluate the influence risk. In order to minimize the risk, the assignment of the workers is focused on. In this paper, we deal with an assembly line as LCMwMP model when two kinds of workers exist, whose efficiency is assumed to two different groups. We consider an optimization problem for finding an assignment of workers to the line that minimizes total expected risk, which is exchanged to expected cost by reset model of LCMwMP. First, reset model as a simple model of LCMwMP is introduced. Then, some hypotheses of the rules of the optimal worker assignment are proposed and some numerical experiments are researched assuming the processing time as Erlang distribution. Finally, the other rules on other certain conditions are discussed.

• 복식문화연구
• /
• 제10권6호
• /
• pp.709-717
• /
• 2002

In the apparel industry, the technology has been advanced rapidly. The use of 3D scanning systems fur the capture and measurement of human body is becoming common place. Three dimensional digital image can be used for design, inspection, reproduction of physical objects. The purpose of this study is to develop a method that drafts men's basic bodice pattern from scanned 3D body surface shape data. In order to pursue this purpose the researchers developed pattern drafting algorithm. The 3D scanner used in this study was Cyberware Whole Body Scanner WB-4. The bodice pattern drafting algorithm from 3D body surface shape data developed in this study is as follows. First, convert geometric 3D body surface data to 3D polygonal mesh data. Second, develop algorithm to lay out 3D polygonal patches onto a plane using Auto Lisp program. The polygon meshes are coplanar, and the individual mesh is continuously in contact with next one The bodice front surface shape data in polygonal patches form was lined up in bust and waist levels. The back bodice was drafted by lining up the polygonal mesh in scapula, chest, and waist levels. in the drafts, gaps between polygons were formed into the darts.

• 한국의류학회지
• /
• 제45권3호
• /
• pp.439-452
• /
• 2021

The purpose of this thesis is to compare the efficiency of 3D digital design technology with traditional hand-drawn designs of a transformable dress for a small wedding. After reviewing the literature, this empirical study analyzed the tendencies of small wedding dress design, concluding that a transformable dress for a small wedding consists of a bodice, skirt, and outer skirt or gown with train, each of which has five possible designs, resulting in 15 virtual items within the 3D program. The 3D program provides the benefit of easy design development as well as reduced costs and design time. Specifically, the random combination of 15 items with layers in the 3D program produced 150 different styles in 5 hours, while hand-drawing 150 dresses took 50 hours. Moreover, the 3D program does not need any material, but 150 physical drawings required a sketchbook, pencil, eraser, and marker, total cost 31,100 won. Additionally, the 3D whole-body scan helps the bride decide which design she prefers through virtual try-ons. Eventually, the 3D program could help a bride decide what she prefers and produce it with virtual simulation, resulting in reduced time and costs.

• 감성과학
• /
• 제21권2호
• /
• pp.137-144
• /
• 2018

본 연구에서는 가변 통기성 스마트 의류의 제작을 위해 필요한 형상기억합금 액추에이터의 작동 조건을 파악하였다. 의복의 개방, 폐쇄와 같은 양방향 작동 시 형태 변형 시에만 전력을 소모하는 저전력 소모 액추에이터 개발을 위해 복수 채널의 일방향 형상기억합금을 이용하여 스위치로 작동되는 액추에이터를 설계하였으며 가장 효율적으로 작동할 수 있는 와이어의 직경과 전압인가 단위시간을 도출하였다. 선행연구 결과 도출된 양방향 작동이 가능한 일방향 형상기억합금의 직경 범위 내에서 Arduino 스위치를 제작하여 3.7V 전압인가 시 변화량을 분석한 결과 $0.4{\Phi}$의 액추에이터가 가장 적합한 것으로 나타났다. $0.4{\Phi}$ 형상기억합금와이어를 사용한 양방향작동 액추에이터의 개방, 폐쇄에 필요한 최적전압인가 시간을 도출하기 위해 액추에이터의 최대개방, 최소폐쇄 도달 전압인가 시간으로부터 50ms씩 감소, 증가 시키며 냉각 후 액추에이터의 내경을 비교하는 방식으로 측정한 결과 개방 동작에 필요한 최적 전압인가 단위시간은 4,100ms로 나타났다. 각 채널간의 발열에 의한 간섭을 최소화하기 위한 양방향간 작동 시 필요 딜레이 분석을 위해 상온에서 형상기억합금에 최적 전압입가 시간인 4.1초 동안 전원을 공급하고 가열 후 냉각까지의 과정을 열화상카메라로 촬영하여 형상기억합금 와이의 온도가 냉각시의 상변태온 이하로 하강하는 시점을 파악한 결과, 액추에이터의 양방향간 작동 딜레이는 1.8초 이상이 확보되어야 함을 파악할 수 있었다.