• Tunnel and Underground Space
• /
• v.21 no.3
• /
• pp.192-204
• /
• 2011

In this study, 3-D analyses were conducted while taking every construction stage into account. Then 2-D analyses were conducted which yield the same results with the 3-D results. The crown settlement normalized by the ultimate value was compared during the process to overcome the discrepancy caused by different dimensions. When a bench or a core is left uncut to give extra support to the face and eventually the whole excavation boundary, this extra supporting effect also has to be included in the analysis. In this study, this effect is also implemented in terms of the load distribution factor. When the length of the bench is very short compared to the diameter of the tunnel in such cases as in short bench cut or in mini-bench cut, the supporting effect of the face does not disappear even after the bench is completely excavated and supported since the face is still too close to the point of interest. The 4th load distribution factor was defined to stand for the advance of the face after the completion of the excavation cycle. The 4th load distribution factor turned out to be very useful in determining the load distribution factors when a tunnel is excavated by bench cut with various bench lengths under different initial conditions.

• Journal of the Korean School Mathematics Society
• /
• v.17 no.4
• /
• pp.437-464
• /
• 2014

Curriculum for mathematic sis the system that selects and organizes the contents which have to be taught in school. Ultimately it can be the whole plan of school mathematical education. The study about curriculum for mathematics is the basic study field of the mathematical education, so curriculum-related studies have been continuously promoted in terms of character, organization and implement of the curriculum, learning contents contained by the curriculum, the connection between school levels, and comparison and analysis of domestic and foreign curricula. Thus, this paper investigated the 2009 Revised Curriculum for Mathematics, which is the curriculum of Korea and the CCSSM which is the curriculum of the U.S. Both have been adopted in schools recently. The purpose of this study is to understand the curricula for mathematics in elementary school of Korea and the U.S. in depth and obtain the implication for the further curriculum revision, by comparing and analyzing the curricula of two countries.

• Korean Journal of Computational Design and Engineering
• /
• v.21 no.3
• /
• pp.353-362
• /
• 2016

As ships become larger and construction of offshore plants increases recently, the amount of outsourcing has increased accordingly in the shipyard. Consequently, the system integration in terms of SCM (Supply Chain Management) of information and material flows has become much more important. Especially, since the SCM in the shipbuilding industry is operated in accordance with the production planning in connection with design, purchasing and production process which are the main components of the supply chain, the best production plan has to be established over the whole scheduling activities from the long-term planning to the short-term planning. The paper analyzes the characteristics of the SCM and the production planning system and suggests the need and the direction of APS (Advanced Planning System) development specialized in the supply chain management only for shipbuilding industry. Furthermore, propose a new SCP-Matrix (Supply Chain Planning Matrix), which is the basis of the APS development, appropriate for the shipbuilding industry and draw the core function of the APS module for the practical production plan.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.3
• /
• pp.280-286
• /
• 2006

As a way to expand electric capacity in conductor with electric power demand, STACIR/AW (Super Thermal-resistant Aluminum-alloy Conductors Aluminum-clad Invar-Reinforced) conductor which has high electric current and heat resistance characteristics have been developed. STACIR/AW power line is mechanical composite wire composed of steel cores for dip control and aluminum conductors for sending electric current. Recently, to ensure stable operation and prediction of wire life span of STACIR/AW conductor, a heat property of STACIR/AW conductor have been investigated. In the present work, a change of essential property with long term-heat exposure of STACIR/AW conductor and its structure material, INVAR wire and Al conductor, have been investigated. INVAR/AW is approximately $3.2\;{\mu}m/m^{\circ}C$. thermal expansion coefficient of INVAR/AW wire increases with time of heat exposure. the thermal expansion coefficient of INVAR/AW is markedly influenced by heat and mechanical treatment. creep rate(0.242) of STACIR/AW $410\;mm^2$ conductor at room temperature is much higher than that(0.022) at $210\;^{\circ}C$ STACIR/AW $410\;mm^2$ conductor has minimum creep rate at operating temperature. To lower creep rate with increase temperature is more unique characteristics in STACIR/AW. It is expected that STACIR/AW turned its tension to INVAR/AW at the transition temperature. at room temperature, the tension apportionment of INVAR/AW in STACIR/AW is about $50\;\%$. but whole tension of STACIR/AW is placed on the INVAR/AW alone of core metal above transition temperature.

• Journal of the Korean Geosynthetics Society
• /
• v.15 no.4
• /
• pp.79-88
• /
• 2016

A derelict bridge called WoljungGyo is being restored in Gyeongju, the capital city of ancient Silla. WoljungGyo was originally built in 760AD, and later rebuilt in 1280AD during the Goryeo Kingdom. The bridge lasted in working condition for at least 520 years. The bridge was uncovered to the remains of both abutments and four piers, with only one or two steps remaining. The provenance of the WoljungGyo stone relics was investigated to decide the type of stone for the restoration works. Field survey were carried out in the whole area of Gyeongju-Si with petrological investigation for the stone relics. Results of the study present that Namsan granite was used in those days for building of the WoljungGyo. It is seems that the used stones were obtained from tor or core stone around the Tongil-jeon and Tap-gok area in the east side of Mt. Namsan.

• Journal of Biosystems Engineering
• /
• v.28 no.1
• /
• pp.45-52
• /
• 2003

Red ginsengs are inspected manually by examining those in the dark room with back light illumination. Manual inspection is often influenced by physical condition of inspectors. Sometimes. the best grade, heaven. has some inner holes though it was inspected by a specialist. In order to resolve this problem, this study was performed to develop image processing algorithm to detect the inner holes in the x-ray image of ginseng. Because of little gray value difference between background and ginseng in the image. simple thresholding method was not appropriate. Modified watershed algorithm was used to differentiate the inner holes from background and normal ginseng body. Inner hole edge region detected by watershed algorithm consists of many number of blobs including normal portions. With line profile analysis with scanning one line at a time beginning the starting point. it shelved two peaks both ends representing extracting each blobs. in which setting threshold value as of lower peak value enabled us to obtain inner hole image. Once this procedure has to be done till the finishing point it is completing inner hole detection for one blob. Thus. conducting ail blobs by this procedure is completing inner detection of one whole ginseng. Detection results of the inner holes fer various size of red ginsengs were good even though there was small detection variation. 6.2%. according to position of x-rat tube.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.20 no.4
• /
• pp.63-75
• /
• 2017

This study carried out for establishing the synthetic restoration plan to improve ecological quality of Mt. Mudeung National Park based on the results of conservation value assessment for yellow-throated marten habitats. Yellow-throated marten has significant implications as umbrella species for the wildlife habitats conservation, therefore, this species could be used to ecological restoration plan of the damaged forest ecosystem in Mt. Mudeung National Park. In this study, we diagnosed the quality of yellow-throated marten habitats in Mt. Mudeung National Park based on five natural and two artificial factors. In addition, we evaluated the integrity of each zone divided by trails quantitatively based on land use intensity. As a result, forest landscape quality in Mt. Mudeung National Park was influenced greatly by human activity and the degree was depended on the intensity of trails. Therefore, in this study, we suggested the closing of trails composed of the illegal and 36 legal trails. And then, we modeled the changes of habitats quality of Yellow-throated marten for each closing step. As a result the area of core habitats increased by two times and wildlife habitats quality improved in the whole area of the Mt. Mudeung National Park. As a result, the results of this study indicate that man-made linear landscape elements play a key role in the quality of habitats for predators, which require large habitats area like the Yellow-throated marten. Therefore, in order to establish an ecological restoration plan in the mountainous area, we recommend the concept of the linear landscape should be applied with the concept of area landscape.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.16 no.4
• /
• pp.315-326
• /
• 1996

An experiment was carried out to determine effect of cultivar, drying agent concentration and preservative on the moisture content, temperature and quality changes of fall harvested oat(Avena sativa L.) hay during field curing and storage. The main plots consisted of the cultivar such as 'Foothill' and 'Swan', the subplots consisted of drying agent concentration such as 7Skg/ha(C1), lOSkglha(C2) and control(C0) and the sub-subplots consisted of preservative such as buffered acid(BA), lactic bacteria inoculant(LB) and control(C0). Moisture contents of 'Foothill' and 'Swan' oat cultivar at harvest were 635.5 and 385.4%DW(Dry weight), respectively, but the final moisture contents of the oat cultivars were 117 and 86%DW. The moisture content of cut oat was not affeded by drying agent concentration. Core temperature of baled 'Swan' oat hay was a little higher than that of 'Foothill' and no consistent preservative effect was found. Total nitrogen content of 'Swan' oat hay was 3.08% and that of 'Foothill' oat hay was 3.45%(P<0.05). Drying agent treatment increased total nitrogen content of 'Swan'(P <0.05), but preservative had no effect. Crude fiber content of oat cultivar was increased as the curing progressed(P<0.05) and the difference of crude fiber content of oat cultivar was maintained through the whole curing period. Effect of drying agent concentration on crude fiber content was not found after preservation. Crude fiber content of 'Swan' oat hay was higher than that of 'Foothill' by 1.O% in ADF and 3.1 % in NDF(P<0.05). No preservative effect was found in crude fiber content. According to RFV of oat cultivar at harvest, forage quality of 'Foothill' and 'Swan' was Prime and Grade 1, respectively, but that of both cultivm was above Grade 2 at the final curing day. RFV of the stored 'Foothill' and 'Swan' oat hay was 122 and 114(P<0.05), respectively, and the quality of oat hay was classified as Grade 1 and 2, respectively, according to the forage quality standard assigned by AFGC.

• Journal of the Institute of Convergence Signal Processing
• /
• v.2 no.4
• /
• pp.31-37
• /
• 2001

License plate recognition system for an exclusive bus-lane is made of 5 core parts which are vehicle detection, image acquisition individual character extraction, character recognition and data transmission. Among them, the accuracy of license plate extraction can bring effect significantly to the accuracy of a whole system recognition rate also the more exact extraction of license plate is required in various weather and environment conditions. Therefore in this paper we propose a plat extraction algorithm that makes pyramid structure to reduced the extraction processing time binarizes plate's template region using adaptive thresholding extracts candidate region containing plate, and verifies a final region using plate character distribution characteristics among the candidates. Experimenal results were exactly extracted the license plate region by using proposed method to the image obtained in an exclusive bus-lane with various weather and environment conditions.

• Journal of Korea Game Society
• /
• v.1 no.1
• /
• pp.5-16
• /
• 2001

Recently, Transition to the epoch of world has put an emphasis on the contents that has been emerging as the value of world economy. Consequently the core of industry is moving from IT industry to culture contents industry. Especially Game Industry among the culture contents industry is estimated that it will be the biggest power of influence in size and social influence. Game Industry is one of the high value-added, knowledge-based industries whose market is increasing faster than any other cultural industries. And game industry includes the technology, culture, cultural science and industry. It effectively symbolizes the character of synthetic entertainment industry in comparison with another industry. Also Game Industry is embedding as the superpower industry that competent to draw the whole development of culture industry because game development is intensifying into One-Source Multi-Use. It is important finding of this paper that it is necessary to ensure the competitive power and understand value and character of contents and to project the policy of human power and technology of Game Industry.