• Environmental Engineering Research
• /
• v.16 no.1
• /
• pp.41-45
• /
• 2011

The aim of this investigation was to demonstrate a rapid bioluminescence bioassay for comparison of the toxicity of whole solids and the aqueous extracts of various environmental solid samples. With regard to the toxicities, those for the soil extracts were mostly found to be lower than those of whole soils, which may have been caused by un-extracted pollutants or dilution during the extraction process. Solid samples from dam-reservoir sediments and municipal refuses were also tested. The toxicities of the solid extracts (0-34%; refuses and sediments) were much lower than those of the whole solids (13-91%). The bioluminescence inhibition test indicated that the harmful effects of the contaminated solids samples were greater than those of the solid extracts.

• Environmental Engineering Research
• /
• v.20 no.4
• /
• pp.377-382
• /
• 2015

The high concentration of nitrogen and phosphorus in wastewater incorporated with the ability to use carbon dioxide as the carbon source make the microalgae become more attractive in wastewater treatment process. This study evaluates the optimal conditions for the digestion of settelable solids from the recirculating aquaculture system to produce the biomass of the green microalga Scenedesmus sp. After solids separation, aerobic digestion of settleable solids under disperse condition produced nitrate as the final product of consequently ammonification and nitrification processes. With the optimal digestion procedure, nitrate concentration during aerobic digestion in 2000 mL vessel increased from $9.63{\pm}0.65mg\;N/L$ to $58.66{\pm}0.06mg\;N/L$ in 10 days. Thereafter, cultivation of Scenedesmus sp. was performed in 1000 mL Duran bottle with air bubbling. The highest Scenedesmus sp. specific growth rate of $0.321{\pm}0.01/d$ was obtained in treatment using liquid fraction after aerobic digestion as the whole culture medium for Scenedesmus sp. cultivation. With this study, digestion of $8,800{\pm}128.12mg\;dry\;weight/L$ of settleable solids from fish pond finally produced $1,235{\pm}21mg\;dry\;weight/L$ of Scenedesmus sp. biomass.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.706-711
• /
• 2003

A numerical method is presented for computing unsteady incompressible two-phase flows with immersed solids. The method is based on a level set technique for capturing the phase interface, which is modified to satisfy a contact angle condition at the solid-fluid interface as well as to achieve mass conservation during the whole calculation procedure. The modified level set method is applied for numerical simulation of bubble deformation in a micro channel with a cylindrical solid block and liquid jet from a micro nozzle.

• Animal Bioscience
• /
• v.37 no.6
• /
• pp.1031-1040
• /
• 2024

Objective: This study aimed to evaluate the effect of feeding milk replacer (MR) with varying levels of lactose and the increased supply of total solids (from 750 to 960 g/d) on performance, blood metabolites, and health of Holstein male calves during the preweaning period. Methods: Forty newborn Holstein calves (10 per treatment) were blocked according to birth weight and date of birth and distributed in a randomized block design to different liquid diets: Whole milk powder (WMP) diluted to 125 g/L solids; MR with 48% lactose (48L), diluted to 125 g/L solids; MR with 53% lactose (53L), diluted to 125 g/L solids; 53L MR corrected to 160 g/L solids (16TS) by the inclusion of a solid corrector. Calves were individually housed in wood hutches, fed 6 L/d of the liquid diet, and had free water and starter concentrate access. The study lasted 56 days. Results: Liquid diet intake was higher for calves fed 16TS than for other treatments. Calves fed 16TS presented higher protein and fat intake, followed by those fed WMP and the 48L or 53L MRs. Lactose intake was higher for 16TS-fed calves, followed by 53L, 48L, and WMP-fed calves. Starter and total dry matter intake did not differ among liquid diets. The average daily gain was higher for 16TS than 48L-fed calves, with the other treatments being intermediary. The lowest feed efficiency was observed for calves fed 48L. No effects on health were observed, as well as on selected blood metabolites, except for albumin concentration, which was higher for calves fed 16TS and WMP. Conclusion: Higher total solids content (160 g/L) in MR increases nutrient intake and consequently improves the performance of dairy calves. Feeding MRs with levels of lactose up to 53% of the DM had no deleterious effect on the performance or health of the calves.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• v.2 no.2
• /
• pp.99-108
• /
• 1998

Results obtained from this research showed that the anaerobic contact process was applicable to pear waste with COD removal efficiencies of up to $95\%$ depending on conditions, provided ammonium and phosphate salts were added as well as other nutrients, present in the commercial fertilizer, Milorganite or in yeast extract. These latter materials were required in minimum concentrations of 5 and 1.5 g/L, respectively, in the feed independent of HRT and volatile solids loading rate, with part of the effect due to the mineral fraction. Digestion was satisfactory over the whole range of volatile solids loading rates and liquid retention time of 30 to 0.5 days tested, although treatment efficiency dropped off noticeably between 1 and 0.5 day liquid retention time because of poorer flocculation and separation of anaerobic bacteria. Settling of anaerobic bacteria including methane producing bacteria was related to settling of mixed liquor suspended solids only at 1 to 5 days liquid retention times, at other liquid retention times anaerobic microorganism settled markedly less efficiently than mixed liquor suspended solids. Further studies are being made to provide information of practical and basic interest. Data on the composition of the active fraction of yeast extract might solve many practical nutrient problems encountered with the anaerobic contact process and improve its economics. Further improvement in the flocculation and settling of anaerobic bacteria as well as other bacteria would improve overall performance and allow the use of shorter liquid retention times with dilute waste. Knowledge about the numbers of methane formers present would allow a degree of understanding and control of the process not presently attainable.

• Journal of the Korean Society of Safety
• /
• v.29 no.4
• /
• pp.123-131
• /
• 2014

Whole amount of waste water, approximately 921.6 liter, for cleaning a ready mixed concrete truck should be used to produce concrete as a mixing water or cleaning water. Recycling water for concrete mixing contains solids, which cause decrease in slump, air and compressive strengths, so it may influence on poor concrete quality. Therefore, it has been maintained to use recycling water with less than 3 percent of solids. Since no evaluation system has been constructed to directly reflect on variability of recycling water from ready mixed concrete plants, it is necessary to develop "Automatic recycling solid measuring system" for quality controls in real time. In this research, sensors measuring waste water concentration in ultrasonic and inductance methods were developed, and automatic system using the sensors were established. The accuracy of measurement sensors developed for recycling water based on various conditions of concentration was proved, and application limits were evaluated. Also, concentration of recycling water using sensors developed from ready mixed concrete plant was measured, and curing method verified the accuracy of the sensors. Moreover, measurement sensors for recycling water in various locations were installed to evaluate the effects on measuring method and spots. The automatic measuring system for recycling water concentration, which is developed in the research, will contribute to improve concrete quality safety through reliable solids maintenance.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.04a
• /
• pp.842-848
• /
• 2013

Developments of Solid-State Gyroscopy during last decades are impressive and were based on thin-walled shell resonators like HRG or CRG made from fused quartz or leuko-sapphire. However, a number of design choices for inertial-grade gyroscopes, which can be used for high-g applications and for mass- or middle-scale production, is still very limited. So, considerations of fundamental physical effects in solids that can be used for development of a miniature, completely solid-state, and lower-cost sensor look urgent. There is a variety of different types of bulk acoustic (elastic) waves (BAW) in anisotropic solids. Shear waves with different variants of their polarization have to be studied especially carefully, because shear sounds in glasses and crystals are sensitive to a turn of the solid as a whole, and, so, they can be used for development of gyroscopic sensors. For an isotropic medium (for a glass or a fine polycrystalline body), classic Lame's theorem (so-called, a general solution of Elasticity Theory or Green-Lame's representation) has been modified for enough general case: an elastic medium rotated about an arbitrary set of axes. Travelling, standing, and mixed shear waves propagating in an infinite isotopic medium (or between a pair of parallel reflecting surfaces) have been considered too. An analogy with classic Foucault's pendulum has been underlined for the effect of a turn of a polarizational plane (i.e., an integration effect for an input angular rate) due to a medium's turn about the axis of the wave propagation. These cases demonstrate a whole-angle regime of gyroscopic operation. Single-crystals are anisotropic media, and, therefore, to reflect influence of the crystal's rotation, classic Christoffel-Green's tensors have been modified. Cases of acoustic axes corresponding to equal velocities for a pair of the pure-transverse (shear) waves have of an evident applied interest. For such a special direction in a crystal, different polarizations of waves are possible, and the gyroscopic effect of "polarizational precession" can be observed like for a glass. Naturally, formation of a wave pattern in a massive elastic body is much more complex due to reflections from its boundaries. Some of these complexities can be eliminated. However, a non-homogeneity has a fundamental nature for any amorphous medium due to its thermodynamically-unstable micro-structure, having fluctuations of the rapidly-frozen liquid. For single-crystalline structures, blockness (walls of dislocations) plays a similar role. Physical nature and kinematic particularities of several typical "drifts" in polarizational BAW gyros (P-BAW) have been considered briefly too. They include irregular precessions ("polarizational beats") due to: non-homogeneity of mass density and elastic moduli, dissymmetry of intrinsic losses, and an angular mismatch between propagation and acoustic axes.

• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.4
• /
• pp.516-519
• /
• 2009

This study was conducted to investigate the effects of replacing whole crop corn silage (WCCS) with whole crop rice silage (WCRS) in the total mixed ration (TMR) on nutrient intake, milk yield and its composition in Holstein cows. The Chucheong rice variety (Oryza sativa L. Japonica) and corn (Pioneer 32 P75) were harvested at yellow-ripe stage and were ensiled in round bales and in trench silos, respectively. Two TMR containing either WCCS or WCRS were prepared. These diets were randomly assigned to 16 midlactating Holstein cows (8 cows per treatment) and were fed for 120 days. The first 20 days were used for dietary adaptation and for the next 100 days daily feed intake, milk yield and its composition were recorded. The pH, lactic acid, NDF, ADF, CP, Ca and P contents were similar in WCRS and WCCS. The DM, ash and EE contents of WCRS were greater compared with WCCS. Nutrient (DM, NDF, TDN and CP) intakes were similar in cows fed WCCS- and WCRS-based TMR. Daily and 4% fat corrected milk yield were not affected by the treatments. Milk composition (percent milk fat, protein, lactose and total solids) was similar in cows fed either WCCS- or WCRSbased TMR. The concentration of milk urea N was greater in cows fed WCRS-based TMR than those fed WCCS-based TMR. In conclusion, round-baled WCRS can replace WCCS in the diet of mid- to late-lactating Holsteins without any deleterious effects on feed consumption, milk yield and its composition. The present findings raise the possibility that WCRS can be used as an alternative roughage source in the diets of dairy cows in countries with surplus rice production.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.10
• /
• pp.1383-1389
• /
• 2004

The nutritive value and utilization of whole crop rice silage (WCRS), Hamasari, at yellow mature stage was determined by three studies. In first study, chemical composition, in vivo digestibility and metabolizable energy (ME) content of WCRS was determined by Holstein steers. WCRS contains 6.23% CP, its digestibility is 48.4% and estimated TDN is 56.4%. Its ME content was 1.91 Mcal/kg DM. Gross energy (GE) retention (% of GE intake) in steers is only 22.7% most of which was lost through feces (44.7% of GE intake). It takes 81 minutes to chew a kg of WCRS by steers. In another study, the effect of Hamasari at yellow mature stage at three stages of lactation (early, mid and late lactation) and two levels of concentrate (40 or 60%) on voluntary intake, ME content and ME intake, milk yield and composition using lactating Holstein dairy cows were investigated. Total intake increased with the concentrate level in early and mid lactation, but was similar irrespective of concentrate level in late lactation. WCRS intake was higher with 40% concentrate level than with 60% concentrate. ME intake by cows increased with the concentrate level and WCRS in early lactating cows with 40% concentrate can support only 90% of the ME requirement. Milk production in accordance with ME intake increased with the increase in concentrate level in early and mid lactating cows but was similar in late lactating cows irrespective of concentrate level. Fat and protein percent of milk in mid and late lactating cows were higher with for 60% concentrate than 40%, but reverse was in early lactating cows. Solids-not-fat was higher with for 60% concentrate than 40% concentrate. Finally in situ degradability of botanical fractions such as leaf, stem, head and whole WCRS, Hamasari at yellow mature stage was incubated from 0 to 96 h in Holstein steers to determine DM and N degradability characteristics of botanical fractions and whole WCRS. Both DM and N solubility, rate of degradation and effective degradability of leaf of silage was lower, but slowly degradable fraction was higher compared to stem and head. Solubility of DM and N of stem was higher than other fractions. The 48 h degradability, effective degradability and rate of degradation of leaf were always lower than stem or head. In conclusion, voluntary intake of silage ranged from 5 to 12 kg/d and was higher with low levels of concentrate, but milk yield was higher with high levels of concentrate. Fat corrected milk yield ranged from 19 to 37 kg per day. For consistency of milk, early lactating cows should not be allowed more than 40% whole crop rice silage in the diet, but late lactating cows may be allowed 60% whole crop rice silage.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.28 no.1
• /
• pp.54-58
• /
• 2008

Time reversal (TR) of body waves in fluids and isotropic solids has been used in many applications including ultrasonic NDE. However, the study of the TR method for anisotropic materials is not well established. In this paper, the full reconstruction of the input signal is investigated for anisotropic media using an analytical formulation, called a modular Gaussian beam (MGB) model. The time reversal operation of this model in the frequency domain is done by taking the complex conjugate of the Gaussian amplitude and phase received at the TR mirror position. A narrowband reference signal having a particular frequency and number of cycles is then multiplied and the whole signal is inverse Fourier transformed. The original input signal is seen to be fully restored by the TR process of MGB model and this model can be more generalized to simulate the spatial and temporal focusing effects due to TR process in anisotropic materials.