• Journal of Powder Materials
• /
• v.16 no.6
• /
• pp.431-437
• /
• 2009

Various inorganic fillers improve the thermal conductivity and physical properties of organic products. Alumina has been used a representative filler in the heat radiation sheet for the heat radiation of electric device. The high filling rate of alumina increases the thermal conductivity and properties of products. We successfully developed the spherical alumina by flame fusion process using the oxygen burner with LPG fuel. In the high temperature flame (2500$\sim$3000$^{\circ}C$) of oxygen burner, sprayed powders were melting and then rotated by carrier gas. This surface melting and rotation process made spherical alumina. Especially effects of chemical composition and particle size of stating materials on the melting behavior of starting materials in the flame and spheroidization ratio were investigated. As a result, spheroidization ratio of boehmite and aluminum hydroxide with endothermic reaction of dehydration process was lower than that of the sintered alumina without dehydration reaction.

• Journal of the Korean Ceramic Society
• /
• v.41 no.1
• /
• pp.41-44
• /
• 2004

Hydrophilicity and hydrophobicity of pottery bodies can be controlled via chemical substitution of layered clay with hydrophilic and hydrophobic organics. In this study, organo-clay nanocomposites were prepared by ion-exchange of montmorillonite with dodecylamine and hexadecylamine, respectively. Substitution sites of organics and the interval changes of layered materials are characterized by FT-IR and WAXD and organics amounts loaded and water comtents contained by C/S analysis and TG-DSC. The organics were selectively intercalated so that increase layer interval from 12${\AA}\; to\;16{\AA}$. Organo-modified clay is changed to more hydrophobic comparing to clay itself.

• Bulletin of the Korean Chemical Society
• /
• v.25 no.6
• /
• pp.843-846
• /
• 2004

Pt nanoparticles loaded on alumina through an impregnation at room temperature was prepared using $K_2PtCl_4$ and acrylic acid as capping material. Transmission electron microscopy showed that the deposited Pt particles indicate ca. 80% cubic shapes with a narrow distribution of 8-10 nm in size. Propylene hydrogenation over the catalyst has been carried out to evaluate their catalytic performance by the values of activation energy. It is determined from the initial rate, reaction order, and rate constant and is found to be $9.7{\pm}0.5$ kcal/mol. This value has been discussed by comparing to those of encapsulated- and truncated octahedral Pt nanoparticles deposited on alumina, respectively, to study influence of the particle size and shape, and capping material used on the activation energy.

• Journal of the Korean Chemical Society
• /
• v.42 no.3
• /
• pp.251-265
• /
• 1998

Punch'ong and whiteware sherds excavated from four kilns located in Ch'unghyodong, Kwangju, Chollanamdo were analyzed for their body and glaze composition. They are classified into eight different groups by the site and layer from which they were collected. In principal component analysis of major composition, the punch'ong body separates out into several different groups. CHE2, made in early fifteenth century, has a higher aluminum and lower iron content compared to the later groups of lower grade. Whiteware body has a very high aluminum content of around 30 wt. in both soft type and hard type. Punch'ong glaze was determined to be lime type and whiteware alkali-lime type.

• Journal of the Korean Ceramic Society
• /
• v.48 no.2
• /
• pp.168-172
• /
• 2011

Alumina powder was added in a general porcelain (Backja) with clay, feldspar and quartz contents to promote the mullite ($3Al_2O_3{\cdot}2SiO_2$) generation in the porcelain. Low melting materials ($B_2O_3(450^{\circ}C)$, $MnO_3(940^{\circ}C)$, CuO($1080^{\circ}C$)) were doped at ~3 wt% to modify the sinterability of porcelain with a high alumina contents and promote the mullite generation. Green body was made by slip casting method with blended slurry and then, they were fired at $1280^{\circ}C$ for 1hr by a $2^{\circ}C/min$. Densifications of samples with high alumina contents (20~30 wt%) were impeded. As the doping contents of low melting materilas increased, the sinterability of samples was improved. The shrinkage rate and bulk density of samples were improved by doping with low melting materials. Mullite phase increased with increasing the low melting contents in the phase analyses. This means lots of alumina and quartz were transformed into mullite phase by low melting contents doping. In the results, high bending strength of samples with high alumina contents was accomplished by improving the densification and mullite generation in the porcelain.

• Journal of Conservation Science
• /
• v.27 no.1
• /
• pp.75-90
• /
• 2011

At the beginning of the Chos$\breve{o}$n dynasty, punch'$\breve{o}$ng began as a simplified form of inlaid celadon, and in the two following centuries it developed into a popular folk craft in various styles and expressive decorations; overtime, it was increasingly made to resemble whiteware, and its production stopped after the Japanese invasion of Korea. In the present study, the body and glaze compositions of punch'$\breve{o}$ng were examined and compared with those of celadon and whiteware, whose compositions have previously been compared with those of Chinese ceramics. Here, the analyzed shards were organized into 28 groups based on their production sites and archaeological characteristics. For each group, the body and glaze compositions of several shards(usually three to five) were obtained, averaged, and compared with those of the other groups. These comparisons showed that the majority of the punch'$\breve{o}$ng bodies were formed, like those of celadon and whiteware, with mica-quartz porcelain stone, which was commonly used in Yuezhou, Jingdezhen, and other southern Chinese kilns. The glazes consisted of clay materials and flux components made from various proportions of wood ash, burnt limestone (glaze ash) and crushed limestone. Overall, the punch'$\breve{o}$ng glazes resembled the Kory$\breve{o}$ celadon and Kory$\breve{o}$ whiteware glazes more closely than the Chos$\breve{o}$n white wareglazes. However, the $TiO_2$ levels found in the tested punch'$\breve{o}$ng were low, similar to those of Chos$\breve{o}$n whiteware; this indicated that glaze stone was used as the clay component of the punch'$\breve{o}$ng glazes, as was the case for Chos$\breve{o}$n whiteware. This study of the material characteristics of punch'$\breve{o}$ng may be used as a comparative framework for analyzing ceramic shards discovered at current and future excavations within Korea.

• Journal of Conservation Science
• /
• v.22
• /
• pp.43-60
• /
• 2008

This study is investigated the characteristics and the comparison on blackware and whiteware at Gilmyeong-ri kilns, located Poncheon-si, Geonggi province at AD 19c using scientific analysis. It is measured by scientific analysis classified as microstructure observation, physical methods which involved chromaticity, specific gravity, absorption ratio and porosity, and chemical analysis of components of body and glaze. As a result, a particle and a pore of body surface appeared differently by the degree of vitrification. In glaze, Blackware have better on good vitrification than whiteware in the microstructure observation. The physical characteristics of chromaticity, specific gravity, absorption ratio and porosity differed according to degree of vitrification rather than porcelain types. In composition, body of blackware have higher ratio of $Fe_2O_3$ and $TiO_2$ than of whiteware. Also glaze of blackware have higher ratio of $Fe_2O_3$ and $TiO_2$, and lower ratio of $SiO_2$ and $Al_2O_3$ than whiteware. Especially, blackware have higher ratio in the composition of CaO and $P_2O_5$ by which ash is used or not.

• Journal of Conservation Science
• /
• v.27 no.1
• /
• pp.13-30
• /
• 2011

This study compared Pottery, Hwaecheongware, Buncheongware and Whiteware pieces excavated in Hakbong-ri of Chungnam analytically by observing their refined structures and estimating their firing temperature. As a result, base soil components of the specimens were mostly similar to those of typical Buncheongware, but the content of the fluxing agent was rather high, and it seemed that the Whiteware had been made with fairly different components from those of other sherds. Although the glaze showed less difference than base soil in general, the content of the glaze changed according to the decorating methods of Buncheongware. Based on the SEM-EDS analysis, it was found that the base soil components of the ceramics seemingly rather different were actually different and the analysis on the fine crystals of the base soil, the anorthite in the glaze and crystals in the ironing part, and the components and contents of white earth showed there were some noticeable points in the process of making each of the sherds. In the refiring experiment to estimate the firing temperature, mostly similar results were gained as $1150^{\circ}C$ to $1200^{\circ}C$ for pottery, $1100^{\circ}C$ to $1150^{\circ}C$ for Hwaecheongware, and $1100^{\circ}C$ to $1200^{\circ}C$ for iron-brown Buncheongware however, the results imply good quality Whiteware was burnt at above $1300^{\circ}C$ while bad quality Whiteware was burnt at a temperature far lower than that. Thus, there was clear difference between Whiteware sherds and other kinds of sherds.

• Journal of the Korean Ceramic Society
• /
• v.29 no.12
• /
• pp.981-989
• /
• 1992

This is a study on the effects of cristobalite transition of quartz in semi-vitrious whiteware body, as addition of alkali and alkali earth oxides, prepared by pottery stone, feldspar, kaolin and clay minerals. The amounts of ${\alpha}$-quartz to ${\alpha}$-cristobalite transition, F.O.C. (fraction of cristobalite), were increased with firing temperature. In MgO added body, ${\alpha}$-quartz was decreased and the formation of cristobalite was increased. Effects of K2O addition was remarkably decreased the formation of cristobalite. Additive effects of MgO and K2O were confirmed that it was very different to variation of transition temperature of metakaolinite to Si-Al spinel structure in thermal reaction of kaolinite minerals. Result CaO addition was ineffective to transition temperature, and the transition temperature in Na2O added body was decreased, but relative intensity of quartz and cristobalite crystal in XRD results was decreased. This was characterized by the effects on the formation of liquid phase much more.

• Journal of Conservation Science
• /
• v.12 no.1 s.15
• /
• pp.1-14
• /
• 2003

Chemical characteristics of whitewares excavated from the of official kiln of the Choseon Dynasty period in Gwangju, Gyeonggido have been stuied using x-ray diffraction, inductively coupled plasma atomic absorption spectrometry and energy dispersive spectrometry. This study shows that most of whitewares excavated from the kiln site are similar in chemistry to each other regardless of their excavated positions and that the their bodies were not made of feldspar minerals. However, the whiteware from sedimentation 1 of waste articles shows mineralogical characters different from those of other sites. This result is in accordance with the report that the whitewares from sedimentation 1 of waste articles have characters different from other sites. The whiteware glaze was produced from raw minerals of both lime and alkali-lime system resulting in wide variation in chemical composition.