• Bulletin of the Korean Chemical Society
• /
• 제26권12호
• /
• pp.1927-1928
• /
• 2005

• 한국세라믹학회지
• /
• 제49권3호
• /
• pp.216-220
• /
• 2012

Mullite formation in a porcelain body was promoted extensively by replacing kaolinite with pyrophyllite. Effects of mullite formation and vitrification by substitution of kaolinite with pyrophyllite on the mechanical and thermal properties were investigated. Addition of 45-55% pyrophyllite (pyrophyllite (45-55%)-feldspar (30%)-Gairome clay (20%)) could vitrify the sintered samples (water absorption : 0.05%, bulk density : 2.66g/cc) and improve the flexural strength (122MPa) when fired at $1280^{\circ}C$. Mullite formation was found to be decreased with increasing content of pyrophyllite. On the contrary, beyond 50% of pyrophyllite quartz and cristobalite phases was found to be increased. Thermal expansion coefficient of the samples decreased with increase of mullite phase. In triaxial system of pyrophyllite-feldspar-clay, the mullite formation of the samples with 50% pyrophyllite reaches about 78.7% and thermal expansion coefficient was found to be $5.4{\times}10^{-6}/K$.

• 한국세라믹학회지
• /
• 제52권3호
• /
• pp.186-191
• /
• 2015

Tribological properties of whiteware with various transparent glazes, which have different composition and microstructure, were investigated. The wear resistance and friction behavior of the glazed whiteware are a very important aspect if the whiteware is used as tableware and for sanitation purposes. Generally, the wear property is influenced by the microstructure and surface morphology of the material. The whiteware specimens with two kinds of transparent glazes were fabricated by using the commercially available porcelain body. Furthermore, the commercial tableware, such as bone china, and traditional tableware were also examined as reference materials. All of the specimens showed that different pore structures might affect the mechanical and tribological properties. It seems that the wear resistance of whiteware is substantially related to the pore size and distribution of glaze rather than the hardness value of the specimen.

• 한국세라믹학회지
• /
• 제49권3호
• /
• pp.231-235
• /
• 2012

Plasticity is the ability of clay to respond to pressure with a continuous and permanent change of shape in any direction without breaking apart, and hold that shape when released. In this work, the effect of water content and aging period on the plasticity of porcelain clay was evaluated using the capillary rheometer to measure the flow rate and the shear stress. The shear stress of porcelain clay was slightly increased with increasing the aging period, indicating that the plasticity of porcelain clay was influenced by an organic content. It was also observed that the water content in the porcelain clay had a great influence on the plasticity of porcelain clay. The shear stress with water content of 21 wt% was sharply increased with increasing shear rate, but the shear stresses with water contents of 24 and 27 wt% is gently incremented.

• 한국세라믹학회지
• /
• 제48권1호
• /
• pp.74-79
• /
• 2011

The pore generation technology using GHM (Glass Hollow Microsphere) was studied in order to reduce the weights of porcelain. In this study, we verify the property of modified slurry by adding GHM. The modified slurry was prepared by adding 1.0~2.5 wt%(K1), 1.0~6.0 wt%(K37) of GHM to the slurry for porcelain. The slurry viscosity were stable inside a content range of 1.0~2.5 wt%(K1), 1.0~6.0 wt%(K37). However, the viscosity of modified slurry increased more than 3.0 wt%(K1) and 6.5 wt%(K37). The formed specimen by slip casting was fired at $1229^{\circ}C$, $1254^{\circ}C$. As the amount of GHM content increased, the weight decreased and the addition of 1.0~2.5 wt%(K1), 1.0~6.0 wt%(K37) of GHM resulted in a weight drop of 30%(K1) and 25(K37). However, when the GHM content increased, the strength decreases over 70%. This is caused by the presence of a large volume of surface defects (pores) and defects from the agglomeration of GHM.

• 한국세라믹학회지
• /
• 제48권3호
• /
• pp.228-235
• /
• 2011

Sintering behavior and lightweight characteristics of porcelain by addition of FAHM (Fly-Ash Hollow Microsphere) were evaluated. Green body of Backja composition (general porcelain) in which FAHM was added(15 and 20 wt%) was made by slip casting method. The green body was sintered at 1270 and $1290^{\circ}C$ and maintained for 1h. The bulk density and linear shrinkage of the sintered body with FAHM (20 wt%) decreased. As the contents of FAHM. increased, mullite and cristobalite phases increased. In the microstructure, FAHM shells remained after sintering, and the generation of mullite fibers around FAHM shells also were confirmed. the weight of porcelain with of 20% FAHM decreased by 40% and residual FAHM shells promoted the mullite of generation in the matrix.

• 보존과학회지
• /
• 제30권1호
• /
• pp.67-80
• /
• 2014

본 연구는 고려 중기 가마터인 유천리 고려백자의 조성 및 미세구조 분석 결과를 기초로 기 연구된 서리, 중암리, 방산동 그리고 법천사지 출토 백자와 비교하여 고려백자의 원료적 특징을 확인한 것이다. 유천리 고려백자는 태토가 고려 전기 백자에 비해 실리카가 높고 융제 함량이 낮은 반면 유약은 이 반대의 특징을 보인다. 또한 철산화물에 비해 티타늄 산화물의 함량이 높게 나타나는 경향을 보이는데 이는 고려청자의 티타늄 산화물 함량과 비슷한 수치이다. 전기 고려백자는 각 가마별 함량의 차이를 보이나 이것이 시기에 따른 일정한 변화로 나타나지는 않았으며 중기 고려백자인 유천리 도편과 비교해 보아도 비슷한 양상이다. 또한 소비유적 출토인 법천사지 고려백자는 도편별 함량 차이를 보여 동일하지 않은 지역에서 제작, 수급되었을 가능성이 있다. 이로 보아 각 가마별 함량의 특징 및 차이점은 고려백자의 시기적 흐름에 따른 변화라기보다 제작 환경이나 재료 수급의 차이 등에 따른 각 지역적인 특성으로 판단된다.

• 보존과학회지
• /
• 제27권1호
• /
• pp.61-74
• /
• 2011

조선백자에 사용된 재료들에 대한 특성을 연구하기 위하여, 광주관요, 충효동과 다른 4곳의 지방가마에서 출토된 도편들의 태토와 유약의 성분을 분석하고 비교하였다. 조선초기의 백자기술은 고려의 청자기술을 기본적으로 계승하면서, 중국 명대의 백자기술의 영향을 많이 받았다. 광주관요에서 사용한 태토원료는 청자에 사용되었던 도석과 같은데, 다만 철산화물과 티타늄산화물의 함량이 상대적으로 적고, 칼륨산화물의 함량이 높다. 한국과 중국 남부에 풍부하게 존재하는 이러한 원료로 중국의 경질백자와 같은 좋은 질의 백자를 개발할 수 있었다. 반면, 충효동에서는 중국 북부의 요지들에서 사용되었던 고령토를 발견하고 사용함으로써 질이 좋은 경질백자를 개발하였다. 유약에 사용된 용융재는 대체로 석회석이며, 처음에는 태워서 사용하였으나, 점점 빻아서 사용되는 경향이 증가하였다. 유약을 만들 때 용융재와 혼합하는 점토는 글래이즈 스톤이라고 불리는 기본적으로 도석과 같은 광물이다. 태토를 만들 때 사용하는 도석보다, 일반적으로 입자가 더 곱고, 장석함량이 더 높다. 이 논문의 조선백자에 대한 과학기술적인 연구와 비교는 최근에 빠른 속도로 발굴되고 있는 18~19세기의 가마터에도 넓혀져야 할 것이다.

• 한국세라믹학회지
• /
• 제48권2호
• /
• pp.173-177
• /
• 2011

Decomposition promoting factors and decomposition mechanism in the zinc decomposition process of waste hard metals which are composed mostly of tungsten carbide and cobalt were evaluated. Zinc volatility amount was suppressed and zinc valatilization pressure was produced in the reaction graphite crucible inside an electric furnace for ZDP. Reaction was done for 2 h at $650^{\circ}C$, which 100 % decomposed the waste hard metals that were over 30 mm thick. As for the separation-decomposition of waste hard metals, zinc melted alloy formed a liquid composed of a mixture of ${\gamma}-{\beta}1$ phase from the cobalt binder layer (reaction interface). The volume of reacted zone was expanded and the waste hard metal layer was decomposed-separated horizontally from the hard metal. Zinc used in the ZDP process was almost completely removed-collected by decantation and volatilization-collection process at $1000^{\circ}C$.

• 한국분말재료학회지
• /
• 제16권6호
• /
• pp.396-402
• /
• 2009

Tantalum nitrides ($Ta_3N_5$) have been developed to substitute the Cd based pigments for non-toxic red pigment. Various doping elements were doped to reduce the amount of high price Tantalum element used and preserve the red color tonality. Doping elements were added in the synthesizing process of precursor of amorphous tantalum oxides and then Tantalum nitrides doped with various elements were obtained by ammonolysis process. The average particle size of final nitrides with secondary phases was larger than the nitride without the secondary phases. Also secondary phases reduced the red color tonality of final products. On the other hand, final nitrides without secondary phase had orthorhombic crystal system and presented good red color. In other words, in the case of nitrides without secondary phases, doping elements made a solid solution of tantalum nitride. In this context, doping process controlled the ionic state of nitrides and the amount of oxygen/nitrogen in final nitrides affected the color tonality.