• Asian Journal of Turfgrass Science
• /
• v.22 no.2
• /
• pp.171-178
• /
• 2008

We have found the clusters of tiny spiny puffball-like mushrooms growing gregariously in fairy ring (arcs) rimmed by a zone of darker green grass in the golf courses. Macroscopic as well as microscopic characters were examined for the morphology of fruiting body. Exoperidium is thin and densely spiny with minute fibrillae at early stage. The connivent spines were soft and quite persistent. In age, the fibrillae scrumble away with a powdery coating, which leaves white endoperidium becoming pale brown. It's interior was white and fleshy at first, but turns into an olive-colored dust as the gleba, the spore-producing tissue, develops to maturity and loaded with olive-brown spore mass. Then, distinct apical pore developed on the endoperidium. Rudimentary subgleba(sterile base) was narrow, chambered, delineated from the gleba by a membrane in young material. These characters suggested this fungus is a Vascellum, a member of the family Lycoperdaceae. The shapes of the spores were globose, echinulate, $3{\sim}3.5{\mu}m$ in diameter, thick-walled, and olive brown. Capillitial threads were $8-9{\mu}m$ wide, mostly colorless in KOH solution and thin-walled, which designated as "paracapillitium". This is an another character that distinguishes this mushroom from Lycoperdon spp. The spines developed on exoperidium were characteristically connivent; their apices joined together in a point, leaving a space below, which gives the appearance of vault to each group of usually 5 to 6 fibrillae. Based on the above characters, this fungus is identified as Vascellum curtisii (Berkeley). The characters distinguishable this from Lycoperdon pulcherrimum, and Vascellum pretense are discussed in detail. Control trial was also attempted. Strong vertical raking(SVR) followed by applying 500x detergent solution (Spark, Aekyung Co. Seoul) resulted in excellent control over any other treatments. In this plot, fruiting body was not developed throughout the end of mushroom growing season.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.19 no.1
• /
• pp.12-16
• /
• 2015

Purpose Principal component analysis (PCA) is a method often used in the neuroimagre analysis as a multivariate analysis technique for describing the structure of high dimensional correlation as the structure of lower dimensional space. PCA is a statistical procedure that uses an orthogonal transformation to convert a set of observations of correlated variables into a set of values of linearly independent variables called principal components. In this study, in order to investigate the usefulness of PCA in the brain PET image analysis, we tried to analyze C[11]-PIB PET image as a representative case. Materials and Methods Nineteen subjects were included in this study (normal = 9, AD/MCI = 10). For C[11]-PIB, PET scan were acquired for 20 min starting 40 min after intravenous injection of 9.6 MBq/kg C[11]-PIB. All emission recordings were acquired with the Biograph 6 Hi-Rez (Siemens-CTI, Knoxville, TN) in three-dimensional acquisition mode. Transmission map for attenuation-correction was acquired using the CT emission scans (130 kVp, 240 mA). Standardized uptake values (SUVs) of C[11]-PIB calculated from PET/CT. In normal subjects, 3T MRI T1-weighted images were obtained to create a C[11]-PIB template. Spatial normalization and smoothing were conducted as a pre-processing for PCA using SPM8 and PCA was conducted using Matlab2012b. Results Through the PCA, we obtained linearly uncorrelated independent principal component images. Principal component images obtained through the PCA can simplify the variation of whole C[11]-PIB images into several principal components including the variation of neocortex and white matter and the variation of deep brain structure such as pons. Conclusion PCA is useful to analyze and extract the main pattern of C[11]-PIB image. PCA, as a method of multivariate analysis, might be useful for pattern recognition of neuroimages such as FDG-PET or fMRI as well as C[11]-PIB image.

• The Journal of Engineering Geology
• /
• v.33 no.4
• /
• pp.543-553
• /
• 2023

The current status of domestic a agalmatolite mines in South Korea was investigated with a view to establishing a stable supply of agalmatolite and managing its demand. Most mined agalmatolite deposits were formed through hydrothermal alteration of Mesozoic volcanic rocks. The physical characteristics of pyrophyllite, the main constituent mineral of agalmatolite, are as follows: specific gravity 2.65~2.90, hardness 1~2, density 1.60~1.80 g/cm³, refractoriness ≥29, and color white, gray, grayish white, grayish green, yellow, or yellowish green. Among the chemical components of domestic agalmatolite, SiO₂ and Al₂O₃ contents are respectively 58.2~67.2 and 23.1~28.8 wt.% for pyrophyllite, 49.2~72.6 and 16.5~31.0 wt.% for pyrophyllite + dickite, 45.1 and 23.3 wt.% for pyrophyllite + illite, 43.1~82.3 and 11.4~35.8 wt.% for illite, and 37.6~69.0 and 19.6~35.3 wt.% for dickite. Domestic agalmatolite mines are concentrated mainly in the southwest and southeast of the Korean Peninsula, with some occurring in the northeast. Twenty-one mines currently produce agalmatolite in South Korea, with reserves in the order of Jeonnam (45.6%) > Chungbuk (30.8%) > Gyeongnam (13.0%) > Gangwon (4.8%), and Gyeongbuk (4.8%). The top 10 agalmatolite-producing mines are in the order of the Central Resources Mine (37.9%) > Wando Mine (25.6%) > Naju Ceramic Mine (13.4%) > Cheongseok-Sajiwon Mine (5.4%) > Gyeongju Mine (5.0%) > Baekam Mine (5.0%) > Minkyung-Nohwado Mine (3.3%) > Bugok Mine (2.3%) > Jinhae Pylphin Mine (2.2%) > Bohae Mine. Agalmatolite has low thermal conductivity, thermal expansion, thermal deformation, and expansion coefficients, low bulk density, high heat and corrosion resistance, and high sterilization and insecticidal efficiency. Accordingly, it is used in fields such as refractory, ceramic, cement additive, sterilization, and insecticide manufacturing and in filling materials. Its scope of use is expanding to high-tech industries, such as water treatment ceramic membranes, diesel exhaust gas-reduction ceramic filters, glass fibers, and LCD panels.

• Journal of KIISE:Computing Practices and Letters
• /
• v.6 no.5
• /
• pp.513-527
• /
• 2000

This paper describes our experience to design and implementation of a collaborative system framework that allows to develop certain collaborative applications such as 3D animation, computer game, and industrial design. The collaborative system enables users, who located in geographically long distance, to do collaborative work in a single virtual space. The proposed system basically consists of client and server system. The goal of proposed system is to support scalability, portability, and platform independent. In order to achieve these, the server is implemented in Java platform and is adopted to the hybrid architecture which takes the advantages both in centralized and decentralized collaborative system. We construct the server base on its functional characteristics so called User Manager Server (UMS), Session Manager Server (SMS), and Information Server (IS), The UMS manages the users who are taking part in the collaborative operations. The SMS supports the conferencing in the proposed system. The IS provides the connection methods among the UMSs. For user's convenience, we implement the client using Visual C++ in Windows. We also expend the functions of 3D Studio Max to distributed environment by means of the plug-in module, and facilitate the chatting and white board functions as well.

• Fire Science and Engineering
• /
• v.28 no.3
• /
• pp.43-48
• /
• 2014

The purpose of this study is to analyze the flame propagation speed, radiation range, diffusion pattern and combustion completion time of a fire by filling a divided space with single combustible substance. It was found that the flame propagation speed was the fastest (0.2 s) for kerosene and the lowest (82.1 s) for alcohol. In the case of paint thinner, it took 19.0 s for the flame to reach its peak at the fastest speed after ignition while in the case of alcohol, it took 138.6 s for the flame to reach its peak at the lowest speed. In the case of the combustion of 200 ml of flammable liquids, the combustion completion time was 79.9 s for paint thinner, which is the shortest, 135 s for gasoline, 170 s for kerosene, 231.4 s for diesel and 337.0 s for alcohol. In addition, when flammable liquids are combusted, the lower part of the flame is governed by laminar flow pattern and the upper part of the flame showed turbulence pattern. In the case of a test performed for bean oil, it could be seen that if the fire source was removed, the flame was automatically extinguished without further combustion and that white smoke was generated due to incomplete combustion.

• Fire Science and Engineering
• /
• v.33 no.6
• /
• pp.120-125
• /
• 2019

A real-scale combustion test was conducted on a vinyl flooring in a divided space, with 50 mL of an inflammable liquid sprayed on it. The combustion behavior of the vinyl flooring was studied in real time, and the carbonization patterns of the surface and cross-sections of the carbonized vinyl floor were analyzed. When the flame ignited by gasoline reached its peak, a continuously flaming region, intermittent flaming region, plume region, etc., were formed. The combustion of 50 mL gasoline on vinyl flooring took 26 s, and a halo pattern was observed. This test involved spraying kerosene evenly on the vinyl flooring and attempting to ignite the flooring using a gas torch, which failed. After the combustion of the vinyl flooring was complete, its carbonized range was measured to be 600 mm in length and 380 mm in width, and the carbonized area was 1000 ㎟. Heat transformed the coated layer of surface of the carbonized vinyl flooring into a carbonized layer, which became harder. The analysis of cross-section of the boundary surface of the carbonized vinyl flooring using a stereoscopic microscope showed that the vinyl flooring was bubbling, and that the white boundary layer at the bottom of the coated layer had disappeared.

• The korean journal of orthodontics
• /
• v.38 no.5
• /
• pp.347-357
• /
• 2008

Objective: The purpose of this study was to examine the effect of ipriflavone on periodontal reorganization and prevention of relapse following tooth movement. Methods: Orthodontic rubber bands were inserted between the first and second maxillary molars of 27 white male rats for 3 weeks for experimental tooth movement. From one day before the removal of orthodontic rubber band, ipriflavone was administered 50 or 400 mg/kg daily in each experimental group whereas carboxymethyl cellulose solution was administered in the control group. They were sacrificed at the 5, 10, and 15th day from the day of removal of orthodontic rubber bands. The amount of relapse was evaluated by measuring the interdental space, and the extent of periodontal reorganization was compared through histological examination. Results: In case of ipriflavone administration, the amount and velocity of relapse was less and slower compared to the control group. In addition, the ipriflavone group showed more rapid periodontal reorganization compared to the control group. Conclusions: The results of the present study suggest that ipriflavone administration can be used effectively in the prevention of relapse following orthodontic tooth movement through the acceleration of periodontal reorganization.

• Journal of the Korean Society of Costume
• /
• v.40
• /
• pp.25-35
• /
• 1998

This thesis is a study of Kas ya, robes of buddhist monk, which is having peculiarity among human clothes. I kept my attention mainly on the symbolism of the color of Kas ya. To elucidate this, I chose the principle of T -chi and Yin-yang and Wu-shing as a frame-work of interpretation. In the first place, the original meaning of Kas ya mean a name of peculiar color. The concrete names of the color are color of persimmons juice, brown, yellow tinged with red, radish brown, non-primary color etc. The main motive to dye three robes of buddhist monk from white or primary color to the color of Kas ya was to differentiate buddhist monks from heathen or laymen. Therefore, as luxurious and primary colored cloths was donated to the buddhist monks, they are necessary to discolor them. Accordingly. they established 'non-primary color' as well-mate one for a ascetic. The non-primary color is called discolored color' as a result of discoloring primary colors. The discolored color is a synonym of Kas ya and the process of discoloring is necessary for making robes of buddhist monk. Secondly, discoloring means to mash five primary color. That is say, the process of discoloring means to return five primary colors back to 'profoundity·abstruseness·obscurity, namely darkness' as the source of them. Darkness as a condition amalgamated and not appeared all materials is the source and at the same time the terminus of all colors. Therefore, color of Kas ya symbolizes 'profound color' as the ultimate meaning of discoloring. Thirdly, discoloring garments of buddhist monk symbolize to destroy evil passions and haughtiness arising in ascetic's mind as well as means don't attach to the shaped materials'. Fourthly, discoloring means to return 'color'. namely 'all kinds of shaped material' to the inherent nature. Process of discoloring means to reture to the empty. nya. nya essentially do not make any colors, but over and over again come into being and become extinct as becoming colors. R pa, by one time Yin and the other time Yang'. R pa, color is a metaplasia of nya and nya is discoloring one of all colors. Then, discoloring means R pa is nya, R pa is nya at the same time and Because this is another expression of Dharma the original meaning of Kas ya symbolize true robes. Consequently, Kas ya means truth and beyond time and space do not be changed and conserve the color of the first till now.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.6 no.2
• /
• pp.103-109
• /
• 2004

This study attempted to investigate the plasticity of Korean paper expressed in contemporary fashion after general inquiry into Korean paper and examine the aesthetic beauty of fashion design using Korean paper. It used the literature review and empirical data analysis together. Korea-paper fashion design, the object of actual investigation, was for Korean-paper fashion from the 1990s to the present. As a result of analysis, the following findings were obtained: First, the natural, warm and soft texture seen as pureness in Korean paper enables us to elicit naturalness from liberalness. In addition, Korean paper not only has the tough characteristic of its material but also has the natural characteristic of abandoning its original nature and complying and adhering to its a given nature. Korean-paper fashion design, using this natural beauty and frank nature, bears the pure image of excluding decoration. Second, the overlapping of the surface on the surface expressed in Korean-paper fashion design forms one space with the sense of depth because of its transparency and expresses temporality through repetition. And the work of folding it with other materials and pasting them up with together demonstrates the effect of reflection because its original transparency. This effect is the specificity created in the collage technique using Korean paper and is the advantage of coming to obtain a wider freedom of expression. Korean-paper fashion design expresses transparency using this repetition and overlapping, Third, Korean paper has the simple rather than luxurious aspect. Owing to this nature, fashion design looks as if there were the greed inherent behind the work made from Korean paper though the complex technique applied to it. And it expresses the restraint of Korean paper using its original white color, the exclusion of decoration and simple design. Fourth, Korean paper is more likely to be changed by the outside influence because of formation. It has its peculiar aesthetic value and original artistry to an extent that it is regarded as one artistic work. The quality and texture of Korean paper diversely vary according to the artist's working process. Like this, Korean paper is easily fused into some object without exclusivity though it may be added to it. Korean-paper fashion design has the beauty of creation that is to create a new world because Korean paper is fused into another material due to its soft nature.

• Investigative Magnetic Resonance Imaging
• /
• v.15 no.2
• /
• pp.110-122
• /
• 2011

Purpose : The purpose of this study is to establish the method generating human brain anatomical connectivity from Korean children and evaluating the network topological properties using small-world network analysis. Materials and Methods : Using diffusion tensor images (DTI) and parcellation maps of structural MRIs acquired from twelve healthy Korean children, we generated a brain structural connectivity matrix for individual. We applied one sample t-test to the connectivity maps to derive a representative anatomical connectivity for the group. By spatially normalizing the white matter bundles of participants into a template standard space, we obtained the anatomical brain network model. Network properties including clustering coefficient, characteristic path length, and global/local efficiency were also calculated. Results : We found that the structural connectivity of Korean children group preserves the small-world properties. The anatomical connectivity map obtained in this study showed that children group had higher intra-hemispheric connectivity than inter-hemispheric connectivity. We also observed that the neural connectivity of the group is high between brain stem and motorsensory areas. Conclusion : We suggested a method to examine the anatomical brain network of Korean children group. The proposed method can be used to evaluate the efficiency of anatomical brain networks in people with disease.