• IEIE Transactions on Smart Processing and Computing
• /
• v.5 no.6
• /
• pp.383-389
• /
• 2016

This paper presents a novel automatic white balance (AWB) algorithm for consumer imaging devices. While existing AWB methods require reference white patches to correct color, the proposed method performs the AWB function using only an input image in two steps: i) white point detection, and ii) color constancy gain computation. Based on the dark channel prior assumption, a white point or region can be accurately extracted, because the intensity of a sufficiently bright achromatic region is higher than that of other regions in all color channels. In order to finally correct the color, the proposed method computes color constancy gain values based on the Y component in the XYZ color space. Experimental results show that the proposed method gives better color-corrected images than recent existing methods. Moreover, the proposed method is suitable for real-time implementation, since it does not need a frame memory for iterative optimization. As a result, it can be applied to various consumer imaging devices, including mobile phone cameras, compact digital cameras, and computational cameras with coded color.

• Textile Coloration and Finishing
• /
• v.25 no.4
• /
• pp.241-246
• /
• 2013

The color properties of a white or nearly colorless fabric are represented by whiteness index (WI) or yellowness index (YI). These two indexes relate to a white fabric's color quality. The purpose of this study was to identify the properties of WI and YI on the CIELAB through the simulations of estimation data for a systemization of color quality control. The results indicated that the relationship between WI and YI was a negative correlation, however the coefficients of correlation function between WI and YI were depended on hue. There were two hue transition points of the rate of changes in WI and YI. These hue transition points were the reference points to divide the hue contribution to WI and YI. These points were not the point of h=0 and h=180 and asymmetric. In addition, where the colors were same distance from the white point on the CIELAB, the rate of changes in WI and YI by ${\Delta}$Ew were depending on hue. Specifically, when WI decreased, YI of reddish and yellowish tinted colors decreased more than bluish tinted colors.

• Journal of Advanced Navigation Technology
• /
• v.16 no.6
• /
• pp.975-981
• /
• 2012

The SNR estimation performance of hierarchical 16QAM system, which is adopted to simultaneous transmission or efficient image transmission system, is analyzed. Hierarchical 16QAM is modulation system which has different constellation shape from conventional QAM and can provide users with high quality and low quality of data services simultaneously by controlling hierarchical modulation parameter. Assuming AWGN channel, SNR estimation performance characteristics are investigated considering hierarchical modulation parameter and type of constellation points. From simulation results, it is found that constellation point showing superior SNR estimation performance relative to other points is exist. Also, it is known that according to hierarchical modulation parameter, SNR estimation range with more accurate estimation performance is divided.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.12 s.243
• /
• pp.1597-1604
• /
• 2005

The identification of a moving noise source is important in reducing the source power of the transport systems such as airplanes or high speed trains. However, the direct measurement using a microphone running with noise source is usually difficult due to wind noise, white the source motion distorts the frequency characteristics of the pass-by sound measured at a fixed point. In this study the relationship between the spectra of the source and the pass-by sound signal is analyzed for an acoustic source moving at a constant velocity. Spectrum of the sound signal measured at a fixed point has an integral relationship with the source spectrum. Nevertheless direct conversion of the measured spectrum to the source spectrum is ill-posed due to the singularity of the integral kernel. Alternatively a differential equation approach is proposed, where the source characteristics can be recovered by solving a differential equation relating the source signal to the distorted measurement in time domain. The parameters such as the source speed and the time origin, required beforehand, are also determined only from the frequency-phase relationship using an auxiliary measurement. With the help of the regularization method, the source signal is successfully recovered. The effects of the parameter errors to the estimated frequency characteristics of the source are investigated through numerical simulations.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.11
• /
• pp.1295-1303
• /
• 2010

In this paper, an effective method has been proposed for selection of white Gaussian noise(WGN) band for radio background noise measurement system under broad band noise environment. MMN which comes from industrial devices and equipment mostly happens in the shape of broad band noise mostly like impulsive noise and this is the main reason for increasing level in the present radio noise measurements. The existing method based on singular value decomposition has weak point that it cannot give good performance for the broad band signal because it uses signal's white property. The proposed method overcomes such a weakness of singular value decomposition based method by using signal's Gaussian property based method in parallel. Moreover, this proposed method hires a modelling based method which uses parameter estimation algorithm like maximum likelihood estimation(MLE) and gives more accurate result than the method using amplitude probability distribution(APD) graph. Experiment results under the natural environment has done to verify feasibility of the proposed method.

• The Journal of the Acoustical Society of Korea
• /
• v.7 no.2
• /
• pp.26-38
• /
• 1988

This paper describes three methods for the estimation of the impulse reponse in an indoor acoustic transfer system which rather has long reverberation time by the cross spectrum. The first method, which is the conventional one, will use the white noise as the source signal. Therefore, the very long time window data and numerous number of DFT are necessary for this estimation. The second method has been disigned in order to shorten the length of time window of the first method by using a burst of noise as the source signal. The third method which will be suggested in this paper uses too types of definite signal with short duration time of the source signal. According to the view point of computation capacity, and estimation accuracy of the impulse response, the compared experimental results show that the third method will be better than the others.

• Water for future
• /
• v.29 no.5
• /
• pp.161-172
• /
• 1996

Studied are the existing equations of Hazen-Williams and Colebrook-White, and the equations of Yoo's (1995) mean zero velocity point and mean friction factor developed for the estimation of commercial pipe friction factor. Simple arrangements of pipe network are devised by changing the diameter, flow discharge and length, and the characteristics of four equations are investigated by comparing the computed results of pressures at each node. Three groups of pipe diameter, small, medium, large, are considered in the comparison, and various problems of existing equations are discussed based on the computed results of pressures and velocities.

• Proceedings of the Korean Printing Society Conference
• /
• 2000.04a
• /
• pp.35-44
• /
• 2000

Because Image on the CRT change under different illuminants, human is difficult to see original color of object. If what is information of used illuminant on capturing object know, image can be transformed according to viewing condition using the linear matrix method. To know information of used illuminant at an image, the spectral radiance of illuminant can be estimated using the linear model of Maloney and Wandell form an image. And then image can be properly transformed it using color appearance model. In this paper, we predict the spectral radiance of illuminant using spectral power distribution of specular light and using surface spectral reflectance at maximum gray area. and then we perform visual experiments for the corresponding color reproduction according to viewing condition. In results, we ensure that the spectral radiance of illuminant at an image can be well estimated using above algorithms and that human visual system is 70% adapted to the monitor's white point and 30% to ambient light when viewing softcopy images.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.3
• /
• pp.224-228
• /
• 2012

We have developed new materials that lead to methyl meth acrylate monomer and styrene monomer to using polymerization method. The materials have a powder form and show liquid behavior. We call the "Electronic Bead". An our experiment, a positive-charged particle has $TiO_2$, polymer and CCA(-), while a negative-charged particle consists of carbon black, polymer and CCA(+). The charged particles have electrical characteristic of white -10 uC/g and black 10 uC/g, respectively. Also, these particles have good fluidity by additive of nano-sized silica. Using these materials, we demonstrated prototype displays that have $320{\times}320$ array of pixels and 6-in-diagonal viewable image size, driven by passive-matrix addressing. The reflectivity shows about 30% even though our experiment is at the beginning point. Also, the panel has contrast ratio 6:1. We think there are many chances to improve reflectivity through modifying components of particle resin, mixture ratio of each particle, panel structure and so on.

• Journal of Broadcast Engineering
• /
• v.13 no.5
• /
• pp.744-751
• /
• 2008

In this paper, we investigate methods to enhance the perceptual quality of MP3-coded audios. Based on the high frequency reconstruction method by Liu, in the proposed method, we determine adaptively the starting point of high frequency reconstruction. We also present an improved linear estimation method. For high frequency component generation, we compare two methods. One is a replication of low-frequency components and the other is an insertion of additive white Gaussian noise signals. Through subjective tests, we shall show that the proposed method can improve the perceptual quality of MP3-coded audio.