• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.6
• /
• pp.1513-1518
• /
• 2012

This paper is implemented media transmission system of VLC transmitter and receiver module using LED of White lighting that is based on PC module and to transmission technology for performance analysis. To realize LED visible light communication receiver is used 1~12 LED light-emitting device and transmitter is used a variable sensor. Developed initial distance of the tranceiver is more than 0~1m for LED VLC and the overall system transmission speed is achieved on variable having Visible light media transmission system. Composition to PC module with LED module and infrared sensor for performance analysis, predict and analyze the communication distance, check about the possibility of application methods. Measure each performance when the lens wearing and not wearing in order to increase the overall efficiency of the LED module, can know that increase efficiency of approximately 20%.

• Transactions on Electrical and Electronic Materials
• /
• v.12 no.6
• /
• pp.253-257
• /
• 2011

This study was carried out to solve problems such as radio frequency band depletion, confusion risk, and security loss in existing visible wireless communication systems, and to determine the applicability of next-generation networks. A light-emitting diode (LED) light communication system was implemented with a controlling switching light module using the ATmega16 micro-controller. To solve the existing modulation effect and disturbance in visible light communication, an integrated interface was evaluated with a driving light module and analyzes its reception property. A transmitter/receiver using the ATmel's micro-controller, high-intensity white LED-6 modules, and infrared sensor KSM60WLM and visible sensor TSL250RD were designed. An experiment from the initial value of distance to 2.5 m showed 0.46 V of the voltage loss, and if in long distance, external light interference occurred and light intensity was lost by external impact and thus data had to be modified or reset repeatedly. Additionally, when we used 6 modules through the remote controller's lighting dimming, data could be transmitted up to 1.76 m without any errors during the day and up to 2.29 m at night with around 2~3% communication error. If a special optical filter can reduce as much external light as possible in the integrated interface, the LED for lighting communication systems may be applied in next generation networks.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.757-758
• /
• 2010

At the time of medical treatment and surgical operation, halogen lamp and plasma lamp were mainly used as luminous source for lighting. These two luminous sources have drawbacks that the life of lamps are not long, various problems are brought about due to excessive heat generation and its volume is very big because of cooling device. Accordingly, in this research a ring light was developed so that a partial shadowless shooting for the patient's affected area at the medical treatment room and surgical operation room using high luminance LED for which attention is being paid as new lighting parts for medical purpose. LED which was applied to the development used high luminance three color LED for full color for which various color materialization and the adjustment of radiation intensity are possible and we can get white light in order to emphasize the delicate expression for generic tone of shooting object, strong highlight, simple shadow and three dimensional effect at the time of close-up shadowless shooting of the affected area.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.10B
• /
• pp.1258-1267
• /
• 2011

In this paper, using the indoor LED-ID communication system have researched for how to transmit video signals. In LED-ID communications use the LEDs for lighting features at the same time communication is an effective way to implement. This proposed system using Visible light(RGB) as way to transmit signals, depends on the mixture RGB, which decided the color of light, moreover, each things determined their performance. However, if the video signal were fixed allocated RGB to transmit such as the original system, the importance of the each signals a different occur the limit on the quality of the video than SVC signals. In order to solve this problem in this paper, according to the RGB mixture ratios analyze the performance for the White LED, which analyzed based on allocating the SVC signal by transmitting to improve the quality of the video was about how researched.

• Korean Journal of Materials Research
• /
• v.29 no.2
• /
• pp.116-120
• /
• 2019

We prepared $Y_3Al_5O_{12};Ce^{3+},Pr3^{+}$ transparent ceramic phosphor using a solid state reaction method. By XRD pattern analysis and SEM measurement, our phosphors reveal an Ia-3d(230) space group of cubic structure, and the transparent ceramic phosphor has a polycrystal state with some internal cracks and pores. In the Raman scattering measurement with an increasing temperature, lattice vibrations of the transparent ceramic phosphor decrease due to its more perfect crystal structure and symmetry. Thus, low phonon generation is possible at high temperature. Optical properties of the transparent ceramic phosphor have broader excitation spectra due to a large internal reflection. There is a wide emission band from the green to yellow region, and the red color emission between 610 nm and 640 nm is also observed. The red-yellow phosphor optical characteristics enable a high Color Rendering Index (CRI) in combination with blue emitting LED or LD. Due to its good thermal properties of low phonon generation at high temperature and a wide emission range for high CRI characteristics, the transparent ceramic phosphor is shown to be a good candidate for high power solid state white lighting.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.8
• /
• pp.614-619
• /
• 2013

Recently, remote phosphor is reported for white LED enhancing of phosphor efficiency compared with conventional phosphor-based W-LED. In this study, Remote phosphor was produced by screen printing coating on glass substrate with phosphor contents rated paste and heat treatment. The paste consists of phosphor, lowest softening glass frit and organic binders. Remote phosphor can be well controlled by varying the phosphor content rated paste. After mounting remote phosphor on top of blue LED chip, CCT, CRI, and luminance efficiency were measured. The measurement results showed that CCT, CRI, and luminance efficiency were 6,645, 68, and 1,16l m/W in phosphor 80 wt.% remote phosphor sintered at $600^{\circ}C$.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.856-859
• /
• 2012

In order to cultivate vegetables in plastic greenhouse or housing facilities it was investigated properties of radiation and functions of LED lamp and proposed application possibility. Against presently existing method of obtaining blue and red colored wave lights needed to plants growing, it was used white LED and red LED to investigate growing conditions as well as brightness and color sense with working condition. And also it was presented lighting system of selective wave functions to promote plant growth.

• Transactions on Electrical and Electronic Materials
• /
• v.15 no.2
• /
• pp.66-68
• /
• 2014

Most commercial white LED lamps use blue chip coated with yellow emitting phosphor. The use of blue excitable red and green phosphors is expected to improve the CRI. Several phosphors, such as $SrGa_2S_4:Eu^{2+}$ and $(Sr,Ba)SiO_4:Eu^{2+}$, have been suggested in the past as green components. However, there are issues of the sensitivity and stability of such phosphors. Here, we describe gallium substituted $YAG:Ce^{3+}$ phosphor, as a green emitter. YAG structures are already accepted by the industry, for their stability and efficiency. LEDs with improved CRI could be fabricated by choosing $Y_3Al_4GaO_{12}:Ce^{3+}$ (green and yellow), and $SrS:Eu^{2+}$ (red) phosphors, along with blue chip. Also, the effect of a slight change in chip wavelength is studied, for two phosphor-coated w-LEDs. The reduction in particle size of the coated phosphors also gives improved w-LED characteristics.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.10a
• /
• pp.240-240
• /
• 2009

오늘날 반도체 기술의 획기적인 발전에 의해서 마침내 에디슨의 탄소 필라멘트 백열전구를 대체할 수 있는 "반도체 필라멘트"라 불리는 고출력 백색 LED (lighting emitting diode)가 차세대 조명광원으로 급부상하고 있다. 백색LED를 생산하기 위한 공정에서 MOCVD (유기금속화학증착)장비를 이용한 공정은 기판의 온도 균일도를 향상시키는 것이 매우 중요하다. 균일한 기판 온도를 갖기 위한 조건으로 기판과 induction heater의 간격, 가스의 흐름, 기판의 회전, 유도가열코일의 디자인 둥이 장비의 설계 요소이다. 본 연구에서는 기관과 induction heater의 간격에 따른 온도를 thermal imaging camera (Fluke, Ti-10)을 이용하여 측정하였다.

• Asian-Australasian Journal of Animal Sciences
• /
• v.29 no.6
• /
• pp.830-837
• /
• 2016

The purpose of this study was to investigate the effect of monochromic light-emitting diode (LED) light with different color on the growth and reproductive performances of white Roman breeder geese. A randomized complete batch design was utilized for the trial, and the replicate was regarded as one batch. Twenty ganders and fifty-five dames were used in batch 1 (started on 2011/6/17 and ended on 2012/1/31), thirty ganders and eighty-four dames were used in batch 2 (started on 2012/3/23 and ended on 2012/10/26), and thirty ganders and seventy-two dames were used in batch 3 (started on 2013/3/12 and ended on 2013/12/20). Two hundred and ninety-one geese were randomly assigned to 6 rooms in an environmentally controlled house. They were randomly allotted into one of three monochromatic light treatments: Blue, red, or white. The results showed that there was no significant difference in body weight among the three lighting groups at any point throughout the experimental period. However, compared to the blue light group, significantly more eggs were produced by the red and white light groups (p<0.05). Furthermore, the laying period of the red light group was significantly longer than that of other two groups (p<0.05). In conclusion, our results suggested that red LED-light has the best effect on reproductive performance (i.e. longer laying period and higher total eggs number) at 30 lux light intensity, and is therefore a better choice for the management of breeding geese than blue or white LED-light.