• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.4
• /
• pp.564-572
• /
• 2013

Two trials were conducted to investigate the effect of decreasing the crude protein (CP) content of diets for finishing pigs containing two levels of available lysine on nutrient digestibility, nitrogen (N) balance and production performance. Ten finishing diets containing five levels of CP (on average 144, 155, 168, 182 and 193 g/kg fresh basis) and two levels of available lysine (6.9 and 8.2 g/kg fresh basis) were formulated. The diets were offered to pigs on a performance trial (n = 800 Large White (LW)${\times}$Landrace (LR) pigs) from 10 wk of age until finish at 21 wks+5 d of age. Average daily gain (ADG), average daily feed intake (ADFI) and feed conversion ratio (FCR) were calculated. In addition, a digestibility/N balance trial was conducted using pigs (n = 80 $LW{\times}LR$) housed in metabolism crates. Digestibility of dry matter (DM), CP, oil, fibre and energy was determined. N balance values were determined through analysis of N content of urine and faeces ('as determined'). N balance values were also calculated using ADG values and assuming that 16% of growth is protein deposition ("as calculated"). Pig performance was poor between 10 and 13 wk of age which indicated that the dietary treatments were nutritionally inadequate for pigs less than 40 kg. There was a significant (p<0.01) quadratic effect of increasing CP level on feed intake, ADG and FCR from 10 to 13 wk which indicated that the lower CP levels did not supply adequate levels of essential or non-essential amino acids. There was no effect of increasing available lysine level throughout the early period, which in conjunction with the response in older pigs, suggested that both 8.2 and 6.9 g/kg available lysine were insufficient to drive optimum growth. There was a positive response (p<0.05) to increasing available lysine level from 13 wk to finish which indicated that 6.9 g/kg available lysine was not adequate for finishing pigs. Energy digestibility decreased with decreasing CP level of diets containing 6.9 g/kg available lysine which may be attributed to the higher fibre content of the lower CP diets. Nitrogen excretion (g/d) was lowered when dietary CP was reduced regardless of whether the values were determined through balance or calculated using ADG. Calculated N excretion decreased linearly (p<0.001) and quadratically (p<0.001) with decreasing dietary CP content. When the N balance figures calculated in this study were compared with those quoted in the Northern Ireland and English Nitrates Directive Action Programmes, N excretion was less per pig (wean to finish) offered a 169 g/kg CP, 8.2 g/kg available lysine diet (2.39 kg vs 3.41 kg (Northern Ireland) and 2.93 kg (England)).

• Journal of Family Resource Management and Policy Review
• /
• v.23 no.4
• /
• pp.75-95
• /
• 2019

The purpose of this study was to investigate the effects of relationship stress at work and family relationship stress on working men's depression in order to improve their mental health. Data were collected via questionnaire from 313 white-collar workers living in Seoul, Daejeon and Gwangju. There were significant differences in depression depending on age, spouse, age of child, family size and years of labor. There were positive correlations among depression, relationship stress at work and family relationship stress. The family relationship stress was the most influential factor on depression, followed by relationship stress at work. Family relationship stress had a mediating effect on depression and relationship stress at work. These results showed that employers should manage depression of workers in a family friendly way to reduce the stress in relationship at work and home such as work and family balance policy.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2003.11a
• /
• pp.306-330
• /
• 2003

The wet-end dynamics of a paper mill was analyzed to characterize its dynamic behavior during the grade change. The model representing the wet-end section is developed based on the mass balance relationships written for the simplified wet-end white water network. From the linearization of the dynamic model, higher-order Laplace transfer functions were obtained followed by the reduction procedure to give simple lower-order models in the form of $1^{st}$-order or $2^{nd}$-order plus dead times. The dynamic response of the wet-end is influenced both by the white water volume and by the level of wire retention. Effects of key manipulated variables such as the thick stock flow rate, the ash flow rate and the retention aid flow rate on the major controlled variables were analyzed by numerical simulations. The simple dynamic model developed in the present study can be effectively used in the operation and control.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.35 no.5
• /
• pp.26-36
• /
• 2003

The wet-end dynamics of a paper mill was analyzed to characterize its dynamic behavior during the grade change of paper. The model representing the wet-end section is developed based on the mass balance relationships written for the simplified wet-end white water network. From the linearization of dynamic model, higher-order Laplace transfer functions were obtained followed by the reduction procedure to give simple lower-order models in the form of 1$^{st}$-order or 2$^{nd}$ -order plus dead times. The dynamic response of the wet-end is influenced both by the white water volume and by the level of wire retention. Effects of key manipulated variables such as the thick stock flow rate, the ash flow rate and the retention aid flow rate on the major controlled variables were analyzed by numerical simulations. The simple dynamic model developed in the present study can be effectively used in the operation and control of paper mills.s.

• The Research Journal of the Costume Culture
• /
• v.10 no.5
• /
• pp.473-484
• /
• 2002

The purpose of this study is to analyze the window display in the department stores in Daejeon. The framework of execution, colors, illumination, and kinds and colon of mannequins of the window display in four department stores in Daejeon were analyzed based on the photographs of displays from January to October in 2001. The results were as follows: First, in the framework of execution, each department store used mostly the triangle-framework during four seasons, which was a fundamental framework. Its characteristics were a sense of security, three-dimensional effect, and balance. It was the most suitable framework fur the mannequins and toruso. Second, a color scheme for commodities was all no-coloring scheme in each four seasons. The color of background was mostly white which harmonized well with the colors of commodities and lights. The plan for the color scheme of window display should always executed on the commodities, and the colors should be harmonized to produce the best display effect. Moreover, when commodities had two colors, the color of background should be in one simple color that manifest the commodities, or that is secondary color to the main color of commodities. Third, all department stores used all same illumination. Lack of illumination, management, and expense incured ineffective production of the display. Fourth, mostly, real mannequins with white or skin colors were used, and the toruso was next used in department stores. The set was limited because many companies had not made new sets for the display. Therefore, new sets including mannequins should be actively developed to produce effective display.

• Archives of Craniofacial Surgery
• /
• v.22 no.3
• /
• pp.164-167
• /
• 2021

Reconstruction of lip defects is important because the lips play an important role in maintaining aesthetic facial balance, facial expressions, and speech. There are various methods of lip reconstruction such as primary repair, skin grafting, and utilization of local and free flaps. It is important to select a proper reconstruction method according to the size and location of lip defect. Failure to select an appropriate method may result in distortion, color mismatch, sensory loss, and aesthetic imbalance. Herein we present a case of successful aesthetic reconstruction of the lower vermilion. We removed a venous malformation, which was limited to the lower vermilion and adjacent to the white roll, and repaired the defect using the modified O-Z flap.

• Science of Emotion and Sensibility
• /
• v.2 no.2
• /
• pp.37-42
• /
• 1999

Long-term exposure to loud noise affects performance since it changes arousal level, distracts attention, and also is able to evoke subjective stress accompanied by negative emotional states. The purpose of the study was to analyze dynamics of subjective and physiological variables during a relatively long-lasting (30 min) exposure to white noise (85 dB[A]). Physiological signals were recorded on 15 college students during 30 min of intense auditory stimulation. Autonomic variables, namely skin conductance level , non-specific SCR number, inter-best intervals in ECG, heart rate variability index (HF/LF ratio of HRV), skin temperature, as well as respiration rate were analyzed on 5 min epoch basis. Psychological assessment (subjective rating of stress level) was also repeated every 5 min. Statistical analysis was employed to trace the time course of the dynamics of subjective and autonomic physiological variables and their relationships. Results showed that the intense noise evoked subjective stress as well as associated autonomic nervous system responses. However it was shown that physiological variables endured specific changes in the process of exposure to the loud white noise. Discussed were probable psychophysiological mechanisms mediating reactivity to long-term auditory stimulation of high intensity, namely short-term activation, followed by transient adaptation (with relatively stable autonomic balance) and then a subsequent wave of arousal due to tonic sympathetic dominance.

• Science of Emotion and Sensibility
• /
• v.22 no.3
• /
• pp.35-46
• /
• 2019

Artificial intelligence (AI) technology has been evolving to recognize and learn the languages, voice tones, and facial expressions of users so that they can respond to users' emotions in various contexts. Many AI-based services of particular importance in communications with users provide emotional interaction. However, research on nonverbal interaction as a means of expressing emotion in the AI system is still insufficient. We studied the effect of lighting on users' emotional interaction with an AI device, focusing on color and flickering motion. The AI device used in this study expresses emotions with six colors of light (red, yellow, green, blue, purple, and white) and with a three-level flickering effect (high, middle, and low velocity). We studied the responses of 50 men and women in their 20s and 30s to the emotions expressed by the light colors and flickering effects of the AI device. We found that each light color represented an emotion that was largely similar to the user's emotional image shown in a previous color-sensibility study. The rate of flickering of the lights produced changes in emotional arousal and balance. The change in arousal patterns produced similar intensities of all colors. On the other hand, changes in balance patterns were somewhat related to the emotional image in the previous color-sensibility study, but the colors were different. As AI systems and devices are becoming more diverse, our findings are expected to contribute to designing the users emotional with AI devices through lighting.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.19 no.1
• /
• pp.1-10
• /
• 1999

To find out the way to be able to prolong the grazing years of mixed pasture under Cheju summer-hot weather, an experiment designed with split plot (main plot : 3 cutting-plant height such as 15cm, 30cm and 45cm and sub plot : 4 white clover varieties such as Regal, Tahora, Brown and SRVR) was carried out at Cheju Agricultural Experiment Station during the period from Sept. 1994 to Oct. 1996 Dry matter yield in 15cm plant height in cutting dates has shown significantly lower increase than those in 30 and 45cm(P<0.05). There was highiy significant increase in dry matter yield of Brown plot when compared with other varieties of white clover in 2nd year(P<0.01). There was no difference on botanical composition of mixed sward as affected by plant height in cuttings dates in 2nd year. The percentage of white clover tends to lower in white clover varieties Brown and SRVR when compared with Regal and Tahora. The rate of weed was not affected by plant height in cutting dates and white clover variety in mixed pasture at last cutting time of 2nd year. In 15cm plant height, concentration of ADE and NDF was the lowest one while P contents was the highest one(P<0.01). Potassium contents was the lowest one in 30cm plant cutting height(P<0.05), and nitrogen showed statistically interaction between plant cutting height and white clover variety(P<0.01). White clover variety was no effective on concentration of constituents in mixed pastures. In conclusion, white clover variety SRVR harvested at 15cm plant height is effective on nutrient value of pasture and balance of grass and white clover in botanical composition.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.585-589
• /
• 2004

This paper deals with the algorithm development that inspects defects such as Lens Focus, Black Defect, Dim Defect, Color Defect, White Balance, and Line Defect caused by the process of Compact Camera Module (CCM). These days the demand of CCM goes on increasing in various types like PDA, a cellular phone and PC camera every year. However, owing to the defect inspection of CCM by the semiskilled work the average inspection time of CCM takes about 40 to 50 seconds. As time goes by the efficiency takes a sudden turn for the worse because workers must inspect with seeing a monitor directly. In this paper, to solve these problems, we developed the imaging processing algorithm to inspect the defects in captured image of assembled CCM. The performances of the developed inspection system and its algorithm are tested on many samples. Experimental results reveal that the proposed system can focus the lens of CCM within 5s and we can recognize various types of defect of CCM modules with good accuracy and high speed.