• 한국기계가공학회지
• /
• 제19권10호
• /
• pp.44-51
• /
• 2020

We studied the heating characteristics of a whirling spindle. This spindle is an important component of a whirling machine for turning a ball screw shaft. In the manufacturing process for a conventional ball screw shaft, a single tool is used to form a spiral in a lathe machine tool. Thereafter, a high-frequency heat treatment process is performed. Recently, a whirling-type cutting method has emerged. This method can perform hard turning in the rotating direction of the spiral portion of the ball screw shaft by rotating and mounting multiple tools. The whirling method can be applied to the heat-treated material. In this study, an experimental apparatus was constructed to analyze the whirling spindle. The experiment proceeded in four steps. The rotating speed of the whirling spindle was set to ISO random and sequential rising conditions. Cooling and non-cooling modes in the cooling jacket were tested. As a result of the above experiment, the heating characteristics of the whirling spindle were derived.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.579-585
• /
• 2003

This paper investigates the whirling, tilting and flying motion of a HDD spindle system supported by FDB experimentally. Experimental setup is built to measure the flying, whirling and tilting motion of the HDD spindle system, and three capacitance probes fixed on the xyz-micrometers measure the displacement of a HDD spindle system in the xyz-directions. This research shows that the tilting and whirling motion is mostly dependent on the centrifugal force and the gyroscopic moment due to the unbalanced mass of a HDD spindle. It also shows that the rotating HDD spindle starts to float to the equilibrium position in the z-direction until the weight of the rotating spindle is equal to the supporting pressure generated in the upper and lower thrust bearing.

• 한국소음진동공학회논문집
• /
• 제15권1호
• /
• pp.39-45
• /
• 2005

This research develops an experimental method to measure the motion of a FDB spindle system with a 3.5' disk by using three capacitance probes fixed on the xyz-micrometers, and it shows that a FDB spindle system has the whirling, flying and tilting motion. It also shows that the whirling, flying and tilting motion converge very quickly to the steady state at the same time when the rotor reaches the steady-state speed. However, they are quite large even at the steady state when they are compared with the 10nm flying height of a magnetic head. For the FDB spindle system used in this experiment, the whirl radius and the peak-to-peak variation of flying height and tilting angle at the steady-state speed of 7,200rpm are 0.675m, 30nm and $5.758\times10^{-3^{\circ}}$, respectively, so that the radial motion of the FDB spindle system exceeds a track pitch of a 3.5' HDD with 90,000 TPI.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 춘계학술대회 논문집
• /
• pp.547-548
• /
• 2008

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
• /
• pp.714-719
• /
• 2000

This paper describes a transfer matrix approach to analyze the dynamics of a high sped flexible rotor system supported at 2 positions by five ceramic bearings. The rotor system is modelled as lumped parameters in which many factors are considered not only lumped inertia or mass, bending moment, shear force but also gyroscopic effect and unbalance. The equation of motion is derived in the transfer matrix form, from which the eigenvalues equation is also derived. The transfer natural frequencies and modes. The eigenvalues, eigenmodes, campbell diagram, whirling critical speed, whirling modes, and the response of unbalance are calculated and discussed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.451-452
• /
• 2006

According to the demand of high productivity, the interest of manufacturing skills is growing in the industrial society. Especially the long spindle becomes important these days. The rotating accuracy of the spindle concerns the centrifugal force. In detail explaining, it is influenced by the speed of the spindle. In this study, we would show changes of the distance caused by a rotating speed of the spindle using a software, $ADAMS^{(R)}$. And because of the gravity of the spindle's mass, we would find the static droop of the long spindle.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 춘계학술대회논문집
• /
• pp.852-858
• /
• 2007

This paper investigates the dynamic characteristics of a tilted HDD spindle system with fluid dynamic bearings (FDBs). Tilting motion of a HDD spindle system may be caused by improper manufacturing tolerance, such as imperfect cylindricity between shaft and sleeve of FDBs, imperfect perpendicularity between shaft and thrust as well as the gyroscopic moment of the unbalanced mass of the rotating part. Tilting motion may result in the instability of the HDD spindle system and it may increase the disk run-out to limit memory capacity. This research proposes a modified Reynolds equation for the coupled journal and thrust FDBs to include the variable film thickness due to the cylindricity and the perpendicularity. Finite element method is used to solve the Reynolds equation for the pressure distribution. Reaction forces and friction torque are obtained by integrating the pressure and shear stress, respectively. The dynamic behavior is determined by solving the equations of a motion of a HDD spindle system in six degrees of freedom with the Runge-Kutta method to study whirling and tilting motions. This research shows that the cylindricity and the perpendicularity increase the tilting angle and whirl radius of the rotor.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 1997년도 추계학술대회논문집; 한국과학기술회관; 6 Nov. 1997
• /
• pp.43-49
• /
• 1997

A rotating rigid disk, attached on a flexible shaft or supported by a torsional spring, experiences precessional whirling due to gyroscopic moment loading. It is well known in rotor dynamics area that, as the rotational speed increases, the precessional mode of the rotating rigid disk starts splitting into two: forward and backward precessional modes. On the other hand, it is also well known in disk vibration area that a rotating flexible disk also shows another kind of mode splitting phenomenon due to the rotation, resulting in forward and backward traveling waves. When rotating multiple flexible disks are coupled in vibration with the supporting Flexible shaft, the associated mode splitting should be compatible with the two seemingly different vibration analysis methods. This paper investigates the possibility of fusing the precessional and traveling wave mode splittings so that the bending coupled disk vibrations in HDD spindle systems can be better understood.

• Composites Research
• /
• 제14권3호
• /
• pp.77-89
• /
• 2001

초고속 일체형 주축의 공진주파수가 일체형 주축 시스템의 모터 회전자의 질량과 주축의 굽힘 강성에 의존하기 때문에 초고속 주축 시스템의 동적 특성을 향상시키기 위해 주축과 회전자를 각각 고분자 기지 섬유강화 복합재료와 자성분말이 함침된 에폭시 수지를 이용하여 설계하였다. 설계된 복합재료 회전자의 자기 특성을 향상시키기 위해 내부에 강철 코어를 삽입하였으며, 강철 코어와 전도체 봉의 기하학적 형상의 변화가 전동기의 성능에 미치는 효과를 파악하기 위해 자기 해석을 수행하였다. 유한요소해석을 통해 복합재료 회전자의 최적의 기하학적 조건을 제안하였다. 또한 복합 재료 회전자 재료의 열특성을 파악하기 위해 TMA, DMA및 VSM을 이용한 기계적, 전자기적 물성측정을 수행하여 복합재료 회전자의 최적 설계에 적용하였다.

• 대한수의학회지
• /
• 제54권1호
• /
• pp.7-12
• /
• 2014

Peripheral nerve sheath tumors (PNSTs) are heterogeneous tumor groups of peripheral nerves that originate from either Schwann cells or modified Schwann cells, fibroblasts, or perineural cells. In this study, signalment and clinical data such as tumor location and size were evaluated for 15 cases of PNSTs collected from local animal hospitals. The mean age of dogs with malignant PNST was higher than that of dogs with benign PNST. Additionally, the male to female ratio in dogs with PNST was 1 : 4. In dogs with PNST, the primary sites of involvement were the hindlimb, forelimb, around the mammary glands, the neck, and the abdomen. Histiopathologic examination revealed that eight PNSTs were benign and seven were malignant. The tumor cells were composed of loosely to densely arranged interlacing bundles and wavy spindle cells arranged in short bundles, palisading, and whirling. High mitotic figures, local invasion, multifocal necrosis and atypical multinucleated giant cells were observed in malignant PNST cases. All PNSTs showed immunoreactivity for vimentin and S-100. However, only 93.3% and 73.3% were immunoreactive for NSE and GFAP, respectively. Overall, these results indicated that immunohistochemical markers such as vimentin, S-100 and NSE could help confirm the diagnosis of canine PNSTs.