• 제목/요약/키워드: Wheelchair Transfer System

검색결과 10건 처리시간 0.022초

차량용 휠체어 이송을 위한 보조메커니즘의 제안에 관한 연구 (A Study on Proposition of The Assisting Mechanism for Wheelchair Transfer for Car)

  • 임구;김용석;양순용
    • 재활복지공학회논문지
    • /
    • 제8권4호
    • /
    • pp.251-258
    • /
    • 2014
  • 휠체어는 지체장애인이나 노약자의 대표적 보조이동수단으로 가장 많이 이용되고 있는 재활보조기구이다. 일반적으로 수동휠체어 이용자는 대부분 자립적 생활 및 직업적 재활이 가능함에도 불구하고 어려움을 격고 있다. 이것은 휠체어를 직접적인 이동수단으로 이용하게 됨으로 원거리 이동 시 휠체어 이송문제가 항상 수반되기 때문이다. 이에 휠체어이용자가 자립생활 및 직업재활이 가능하기 위해서는 휠체어 이송문제가 최우선적으로 해결되어야만 한다. 따라서 본 연구에서는 차량용 휠체어 이송시스템에 대한 국내외 출시제품과 특허기술을 조사하고 분석하여 새로운 시스템의 차량용 휠체어 이송을 위한 보조메커니즘을 제안하였다. 본 연구에서 제안된 차량용 휠체어 이송메커니즘은 기존의 휠체어 이용자 이동지원을 위한 차량용 휠체어 이송시스템의 단점을 해소하고 국내 장애인복지차량 구조에 부합되도록 하기위해 제안되었다. 본 제안된 메커니즘을 적용함으로써 차량 루프에 설치되는 수납공간이 일반적으로 활용되고 있는 레저수납공간과 차이가 없어지게 됨으로써 사용자의 호응도를 높여줄 수 있으며, 이렇게 작아진 수납공간은 주행 시 공기저항의 단점을 줄일 수 있게 될 것이다. 또한 현 국내복지차량의 구조에 부합하게 되어 소형세단에서부터 SUV차량까지 적용범위에 대한 제한이 없어지게 됨으로써 이용자에게는 선택에 대한 폭이 넓어지게 될 것이다.

  • PDF

차량용 휠체어 이송수납메커니즘의 개발에 관한 연구 (Study on Development of Wheelchair Transfer-Storage Mechanism for Car)

  • 임구;김용석;레콴환;정영만;오동관;오지우;여찬호;양순용
    • 대한기계학회논문집A
    • /
    • 제38권10호
    • /
    • pp.1109-1116
    • /
    • 2014
  • 본 연구에서 제안된 차량용 휠체어 수송메커니즘은 크게 이송메커니즘과 수납메커니즘으로 구성된다. 여기서 휠체어 이송메커니즘은 매니퓰레이터로 구성되며, 차량의 루프에 설치되어 운전석에서 트렁크의 위치까지 휠체어를 이송하는 기능을 한다. 휠체어 수납메커니즘은 리프팅 호이스트로 구성되며, 차량의 트렁크에 설치되어 이송된 휠체어를 트렁크 내부로 수납하고 안전하게 고정하는 기능을 한다. 본 연구에서는 휠체어 이송메커니즘의 조건을 고려한 매니퓰레이터의 방식선정을 위해 수직방식, 수평방식, 텔레스코픽방식 등에 대하여 분석하고 검토하여 하중지지에 강하고 수납보관에 유리한 텔레스코픽방식을 선정하여 적용하였다. 또한 휠체어 수납메커니즘에서는 슬라이드 레일과 리프트와이어에 의한 슬라이드 호이스트방식과 웜기어와 링크로 구성된 회전메커니즘에 의한 회전링크 호이스트방식에 대하여 분석하고 검토하여 트렁크 공간 활용에 유리한 슬라이드 호이스트방식을 선정하여 적용하였다. 본 연구에서 제안된 차량용 휠체어 이송메커니즘은 기존의 휠체어 이용자 이동지원을 위한 차량용 휠체어 이송시스템의 단점을 해소하고 국내 장애인복지차량 구조에 부합하도록 제안하였다.

Design of Ergonomic Front-Entry Sitting Toilet System for People using Wheelchairs

  • Chung, Hyun Ae;Park, Jemo;Hwang, Jung Bo;Kim, Hee Dong;Jung, Hwa Shik
    • 대한인간공학회지
    • /
    • 제35권5호
    • /
    • pp.425-437
    • /
    • 2016
  • Objective:The objective of this study is to develop an ergonomic toilet system along with constituent facilities that can be used with the front-entry sitting method when transferring from wheelchair to the toilet stool, instead of using the back-entry sitting method which is currently used. This system can offer more ease, convenience and safety for wheelchair users when using the restroom. Background: For users with disabilities, even a dedicated handicapped toilet requires maneuvering, especially when in a wheelchair. To transfer from wheelchair to the current back-entry sitting toilet, users need to get closer to the toilet and then turn or twist after erecting their body to get onto the toilet. This method induces inconvenience as well as secondary injury by falling when transferring to/from toilet. Method: To design a front-entry sitting toilet system, an ergonomics approach was applied which introduces a new design concept for people using wheelchairs. Using this toilet system, the wheelchair users don't need to turn or twist but can simply slide forward off the wheelchair directly onto the toilet stool in an easier and safer way. Results: The newly developed front-entry sitting toilet system is easier and safer for wheelchair users, and also space efficient requiring only two-thirds of the space of existing handicapped toilet. It is also usable by both individuals with disabilities and the general population. Conclusion: With the spread of the front-entry sitting toilet system developed in this study, wheelchair users can benefit from enhanced convenience and safety as well as significant restroom space savings. Additional effects can also be achieved such as improved self-esteem of people with disabilities by enabling to use the toilet on their own. Application: The newly developed front-entry sitting toilet system should enhance toilet accessibility to wheelchair users and the elderly. Introduction is needed with efforts at the national policy level and a macroscopic objective to promote the health and safety of the handicapped.

관절형 크로라 이동 로봇을 이용한 휠체어의 자동 계단 승월 시스템 (Automatic Stair Climbing System of Wheelchair Using Articulated Crawler Type Mobile Robot)

  • 신재호;한영환
    • 대한의용생체공학회:의공학회지
    • /
    • 제17권1호
    • /
    • pp.1-10
    • /
    • 1996
  • In this paper, describe the automatic climbing wheelchair system use an articulated crawler mobile robot. This wheelchair system(call system) is composed of sensor detecting part and wireless communication part with PC. The sensor parts are consisted of sloping sensor and ultrasonic sensor part. The sloping sensor measures the sloping angle of system, and the ultrasonic sensor measures the distance of system's front wheel center from stair. PC will generate the operation data to climb up the stair using the measured data and make primitives for the system. At firsts This system transfer from sensor data to the PC. PC calculate the operation data to climb up the stair from the internal algorithm. We simulated the system in various stair angle slope($25^{\circ}$, $30^{\circ}$, $45^{\circ}$), and tested it on the real staircase with width 37cm, highlt 18cm, Angle $26^{\circ}$ . There were $0.350^{\circ}$ - $1.060^{\circ}$ Angle errors while climbing because adapted sensor has a precision $0.35^{\circ}$ in resolution. Finally, We implemented the sensor detecting part and the wireless communication park and practiced our system in 4cm/sec speed.

  • PDF

침대 이송 기능을 갖춘 수동식 휠체어 설계 (Design of Manual Wheelchair with a Function of Bed Transfer)

  • 고현준;김남열;현정근;정우철;강모원;김종형
    • 한국생산제조학회지
    • /
    • 제22권3_1spc호
    • /
    • pp.580-586
    • /
    • 2013
  • In general, manual wheelchairs have played important roles in moving patients from one place to another. However, patients have experienced discomfort getting on and off because of the need for physical assistance. This can be more serious if a patient has handicaps involving the arms or legs. In addition, it could be unpleasant for both the patient and assistant because of the need for extensive physical contact with each other. At times, a weak nurse feels that there is a risk when transferring a heavy patient from a bed to a wheelchair. In this paper, a new non-powered wheelchair is designed to assist in transferring a patient to their bed. This design considers the convenience of both the patient and assistant when the patient is transferred from a wheelchair to a bed and vice versa. The operation minimizes the physical contact between the assistant and the patient. The new wheelchair is also lightweight and portable compared with the normal popular wheelchair.

다기능 전동휠체어의 설계 및 구현 (Design & fulfillment of multi-functional electric wheelchair)

  • 강재명;강성인;김정훈;류홍석;이상배
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2002년도 하계종합학술대회 논문집(5)
    • /
    • pp.261-264
    • /
    • 2002
  • In this study, we used a 16-bit microprocessor, 80C196KC for a control part in order to develop a multi-functional wheel-chair system, and implemented a joy-stick to control this system. For the complete system, we used a commercial electromotive wheelchair as a basic plant, and applied an encoder to get the rotating number of the motor to transfer data to the MCU to control the motor. We used PWM (Pulse Width Modulation) method to control the wheel-chair motor where a H-bridge circuit was configured. We used the fuzzy control algorithm for the operation of DC motor, which was attached to the electromotive wheelchair and manipulated following the change of the joystick position while a user was controlling the joystick. He also could control the speed and direction of DC motor as well as control position information.

  • PDF

화자 독립 방식의 음성 인식 칩 및 무선 마이크를 이용한 전동 휄체어의 구현 (Implementation of Motorized Wheelchair using Speaker Independent Voice Recognition Chip and Wireless Microphone)

  • 송병섭;이정현;박정제;박희준;김명남
    • 센서학회지
    • /
    • 제13권1호
    • /
    • pp.20-26
    • /
    • 2004
  • For the disabled persons who can't use their limbs, motorized wheelchair that is activated by voice recognition module employing speaker independent method, was implemented. The wireless voice transfer device was designed and employed for the user convenience. And the wheelchair was designed to operate using voice and keypad by selection of the user because they can manipulate it using keypad if necessary. The speaker independent method was used as the voice recognition module in order that anyone can manipulate the wheelchair in case of assistance. Using the implemented wheelchair, performance and motion of the system was examined and it has over than 97% of voice recognition rate and proper movements.

지능형 전동 휠체어의 설계 및 구현 (The design & implementation of intelligent motorized wheelchair)

  • 강재명;강성인;김정훈;류홍석;김관형;이상배
    • 한국지능시스템학회:학술대회논문집
    • /
    • 한국퍼지및지능시스템학회 2002년도 춘계학술대회 및 임시총회
    • /
    • pp.10-13
    • /
    • 2002
  • 본 연구에서는 다기능 휠체어 시스템을 개발하기 위해 제어부를 16bit의 마이크로 프로세서인 80C196KC 사용하였고, 조이스틱을 통해서 된 시스템을 제어하는 것을 구현하였다. 전체시스템은 제작된 전동 휠체어 기본 Plant를 사용하였으며, 모터에서 Encoder로 입력받아 MCU를 통해서 휠체어 회전수를 이용하여 제어시켰다. 휠체어 모터의 제어 방법은 PWM(Pulse Width Mudulation)을 이용하였으면, 여기에 H-브릿지 회로를 구성하였다. 조이스틱을 사람의 손으로 제어하는데 있어서 조이스틱 위치 변화에 따른 전동휠체어에 부착된 DC모터 동작을 퍼지 제어 알고리즘을 사랑하였으며, DC모터의 속력과 방향을 제어하고 아울러 위치 정보까지도 제어할 누 있게끔 하였다.

  • PDF

전동화 수동 휠체어 INMEL-VII의 주행 안정성 개선에 관한 연구 (A Study on the Improvement of Driving Stability for the Motorized Manual Wheelchair INMEL-VII)

  • 정동명;고수복;김주명
    • 대한의용생체공학회:의공학회지
    • /
    • 제16권4호
    • /
    • pp.543-554
    • /
    • 1995
  • 본 논문에서는 전동화 수동 휠체어 INMEL-VII를 위한 주행 안정성과 제어기의 개선에 관하여 연구하였다. 기 개발된 INMEL-VI의 2년 여에 걸친 현장 실험에서 오르막길에서의 후방 전복으로 인한 주행안정성, 모터의 PWM 제어로 인한 스위칭 노이즈, 심한 내리막길에서 주행 명령이 없어도 모터가 회전하는 문제들이 지적되었다. 이러한 문제를 해결하기 위해 INMEL-VII에서는 모터와 구동축을 직결하고 출력을 증가시켰으며 바퀴의 중심축을 이동하여 무게중심을 안쪽으로 이동시켜서 후방 전복 임계 경사각을 크게 증가시켰고, 스위칭 주파수를 5kHz로 설정하기 위해 하드웨어를 개선하였다. 또한 INMEL-VII에서는 다양한 가속 및 감속 루틴으로 소프트웨어의도 개선하였다. 현장 주행 실험 결과 기계적 구성과 소프트웨어의 개선으로 인한 주행 안정성이 증가되고 다양한 조작이 가능해졌음을 알 수 있었다. 본 연구결과로 장애자의 보행 보조기구연구에 기여하고 보행부자유자에게는 염가의 국산 전동휠체어를 사용할 수 있는 기화가 증가되기를 기대한다.

  • PDF

간호기기 개발수요 조사연구 (A Study on the Demand for Equipent Development in Nursing)

  • 장순복;김의숙;황애란;강규숙;서미혜
    • 대한간호
    • /
    • 제35권2호
    • /
    • pp.71-91
    • /
    • 1996
  • The objectives of thes study were to identify the need for equipment development in nursing, and to determine the priorities for that development. The study was descriptive study done between March 2 and May 30, 1995, in which the subjects, including 421 patients, 223 family members, and 198 nurses from neurosurgery, orthopedic, rehabilitation medicine, internal medicine and intensive care units of nine general hospitals in Seoul, completed a questionnarie developed by the research team. The questionnaire consisted of 35 open and closed questions. Data was analyzed using frequencies and percentages. The results ware summarized as follows: 1) The average age of the nurses was 27.9 years, 48% of the patients were between 20 and 40 years of age, and 17% were over 60. The average lingth of experience for the nurse subjects was four years five months with 36.9%. having over five years experience. The most frequent diagnoses of patients were spinal disc(35.9%), internal medicine disease(26.0%), cerebral vascular accident(16.6%) and spinal cord injury(10%) 2) Many of the nurses(96.4%) reported deficiencies with existing equipment and 96.5% of the nurses, but only 79.8% of the patients, nurses' time. Further, 82.3% of the nurses and 75.8% of the patients felt that the development of new equipment would lead to a decrease in the cost of nursing care. 3) Nurses felt that the greatest areas of inconvenience were patient feeding(71.7%), hygiene(71.2%), caring for a patient confined to bed(70.7%), patient clothing(67.2%), mobility transfers(63.5%) and urinary elimination(52.0%). However, patients and family members listed the following as being the most inconvenient: urinary elimination(58.7%), Hygiene(50.5), feeding(48.4%), mobility transfers(47.1%) and bed care(45.2%). 4) Generally the nurses listed more inconveniences and patients and family members listed more demands for the development of equipment. These included utensils with large handles, and regulators for tube feedings; mattresses that provide for automatic position change and massage, which have patient controlled levers and a place for bed pan insertion; automatic lifts or transfer from bed to wheelchair; equipment to facilitate washing and oral hygiene as well as equipment that will allow patients with spinal cord injuries easy access to showers; a bed pan/urinal for women that is comfortable and effective from which urine can be measured and disposed of easily; disposable dressing sets and tracheostomy care sets and a convenient way of measuring changes in wound size; a safe delivery system for oxygen, a variety of mask sizes and better control of humidity, tracheal material than at present, as well as a communication system for patients with tracheostomies; clothing that will allow access to various parts of the body for treament or assessment without patients having to remove all of their clothing; and finally a system that will allow the patient to control lighting, telephones and pagers. Priority areas for equipment development reported by the nurses were, urinary elimination(58. 7%), hygiene(50.5%), feeding(48.4%), mobility transfers(47..1%), bowel elimination(40.8%). Those reported by the patients family members were feeding(71.7%), hygiene(70.0%), bedcare(70.7%), clothing(67.2%), mobility transfers(63.6%), urinary elimination(52.9%) and bowel elimination(50.5%) Altogether, nurses, patients and family members listed the following as priorities; clothing (178), bed care(144), urinary elimination(92), environment(81), hygiene(70). Further, a health professional forum listed urinary elimination, oxygen delivery, medication delivery, mobility transfers, bed care and hygiene in that order as priority areas. From this study it can be concluded that the first need is to develop equipment that will address the problems of urinary elimination. To do (l)This nurses who are interested in equipment development should organize an equipment development team to provide a forum for discussion and production of equipment for nursing.

  • PDF