The design & implementation of intelligent motorized wheelchair

지능형 전동 휠체어의 설계 및 구현

  • 강재명 (한국해양대학교 전자통신공학과 퍼지-뉴로제어연구실) ;
  • 강성인 (한국해양대학교 전자통신공학과 퍼지-뉴로제어연구실) ;
  • 김정훈 (한국해양대학교 전자통신공학과 퍼지-뉴로제어연구실) ;
  • 류홍석 (한국해양대학교 전자통신공학과 퍼지-뉴로제어연구실) ;
  • 김관형 (한국해양대학교 전자통신공학과 퍼지-뉴로제어연구실) ;
  • 이상배 (한국해양대학교 전자통신공학과 퍼지-뉴로제어연구실)
  • Published : 2002.05.01

Abstract

In this study, we used a 16-bit microprocessor, 80C196KC for a control part in order to develop a multi-functional wheel-chair system, and implemented a joy-stick to control this system. For the complete system, we used a commercial electromotive wheelchair as a basic plant, and applied an encoder to get the rotating number of the motor to transfer data to the MCU to control the motor. We used PWM (Pulse Width Modulation) method to control the wheel-chair motor where a H-bridge circuit was configured. We used the fuzzy control algorithm for the operation of DC motor, which was attached to the electromotive wheelchair and manipulated following the change of the joystick position while a user was controlling the Joystick. He also could control the speed and direction of DC motor as well as control position information.

본 연구에서는 다기능 휠체어 시스템을 개발하기 위해 제어부를 16bit의 마이크로 프로세서인 80C196KC 사용하였고, 조이스틱을 통해서 된 시스템을 제어하는 것을 구현하였다. 전체시스템은 제작된 전동 휠체어 기본 Plant를 사용하였으며, 모터에서 Encoder로 입력받아 MCU를 통해서 휠체어 회전수를 이용하여 제어시켰다. 휠체어 모터의 제어 방법은 PWM(Pulse Width Mudulation)을 이용하였으면, 여기에 H-브릿지 회로를 구성하였다. 조이스틱을 사람의 손으로 제어하는데 있어서 조이스틱 위치 변화에 따른 전동휠체어에 부착된 DC모터 동작을 퍼지 제어 알고리즘을 사랑하였으며, DC모터의 속력과 방향을 제어하고 아울러 위치 정보까지도 제어할 누 있게끔 하였다.

Keywords