• International Journal of Railway
• /
• 제1권3호
• /
• pp.106-112
• /
• 2008

Rolling-sliding, cyclic contact of wheel and rail progressively alters the microstructure of the contacting steels, eventually leading to micro-scale crack initiation, wear and macro-scale crack growth in the railhead. Relating the microstructural changes to subsequent wear and cracking is being accomplished through modelling at three spatial scales: (i) bulk material (ii) multi-grain and (iii) sub-grain. The models incorporate detailed information from metallurgical examinations of used rails and tested rail material. The initial 2-dimensional models representing the rail material are being further developed into 3-dimensional models. Modelling is taking account of thermal effects, and traffic patterns to which the rails are exposed.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.1078-1083
• /
• 2008

In this paper, assessed are the stability of vehicle and track according to vertical support stiffness difference on the transition between conventional and zero-longitudinal resistance (ZLR) rail fastener on bridge. For this, the spring constants of rail fastener have been determined according to different load ranges - KTX load (with or without impact factor) and test load of EN standards - from results of laboratory test on rail pad, the stability analysis of vehicle and track has been performed according to numbers or installation length of ZLR fasteners using vertical vehicle-track coupled model to consider train-track interaction. The analysis results reveal that only the wheel load variation slightly exceed the limit value when 2 ZLR fasteners are used with spring constant determined within the EN test load range, but, in all other cases, all evaluation items are satisfied. Thus, it can be said that the stability of vehicle and track will not be degraded by ZLR fastener.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 THE THIRD INTERNATIONAL CONFERENCE ON AGRICULTURAL MACHINERY ENGINEERING. V.III
• /
• pp.722-728
• /
• 2000

This study of field control machine in the recycled vinyl rail is gantry crane type and promoting agricultural automatization through self-controlled spraying, harvesting and conveyance. In addition to, that control machine could get a cost and labor reduction effect through automatization and make better environment by preventing farmers from agrichemical damage, accidents and recycling wasted vinyl. That machine is able to be divided as traveling, spraying, harvesting and conveyance sections. In driving section consists of girder frame, carrier, rail, control system, driving system, working machine, rail and loading device for working machine. This machine has following advantages to be able to bring a big innovation in the agricultural industry. I) Accurate performance is able to be done by proper positioning due to based on the rails. 2) The soil is not made hard like heavy tractor 3) The wheel is not sank into the soil and slipped well under rain like heavy tractor. Therefore, weather and soil situation could not affect working condition. 4) Complete unmanned control and 24hours-working are available due to traveling on the rails. 5) It could use various energy resources like not only liquid fuel but also solar, common electronic power due to traveling on the rails.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.793-799
• /
• 2011

A comprehensive analysis of wheel force spectrum is conducted to provide the KTX safety evaluation with structural behaviour of Pre-Stressed Concrete (PSC) box bridge due to various high speeds. The wheel spectrum for KTX locomotive running over road and PSC bridge tracks is compared using irregular track responses with numerical models of 170m approach road track and 40m span length of PSC box bridge The high-speed railway locomotive is used as 38-degree of freedom system. Three displacements (vertical, lateral, and longitudinal) and three rotational components (pitching, rolling, and yawing) for one car-body and two bogies are considered in the 38-degree of freedom model. Three dimensional frame element of finite element method (FEM) is used to model of the simply supported PSC box bridge. The irregulation of rail-way is derived using the experiential spectrum density function under assumption of twelve level tracks conditions based on the normal probability procedure. The dynamic analyses by Runge-Kutta method which are able to analyze the high frequency wheel force spectrum. A dynamic behaviour of KTX due to high speeds until 450km/h developing speed with relative time is analysed and compared the characteristics running over the road and PSC box bridge tracks. Finally, the KTX integrated evaluation method of safety between high speed train and bridge is presented.

• 한국소음진동공학회논문집
• /
• 제16권12호
• /
• pp.1231-1237
• /
• 2006

The vibration of a running railway vehicle can be classified on lateral, longitudinal and vertical motions. The important factor on the stability and ride quality of a railway vehicle is the lateral motion. The contact between wheel and rail with conicity influences strongly on the lateral motion. In this study, an experiment for the vibration of a running railway vehicle was performed using a of the scale model of a railway vehicle. Also, the effects on the car-body, bogie and wheelset were examined for the weight and the stiffness of the second suspension system. The experimental results showed that the lateral vibration increases as the wheel conicity and stiffness of the second suspension system increase. And the lateral vibration of the bogie increases as the mass ratio between car-body and bogie increases. Also, the lateral vibration of the wheel becomes high at low speed, while the wheel of 1/20 conicity makes severe vibration at high speed running.

• 한국정밀공학회지
• /
• 제28권5호
• /
• pp.559-564
• /
• 2011

For the safety of railway, it should be evaluated for the running safety by measuring the derailment coefficient. Although railway has run the fixed and maintained rail, some of railway is derailed. This report shows the results that performed the static load test, main line running test on the basis of the derailment theory and experience. It is executed main line test into more than 90km/h for estimating the curving performance and running safety of depressed center flat car of 3-axle bogie. As the test results, could confirm the curving performance and running safety of depressed center fiat car of 3-axle bogie from the results of the wheel unloading, lateral force, derailment coefficient etc. Derailment coefficient was less than 0.6, and lateral force allowance limit and wheel load reduction ratio were enough safe.

• 대한토목학회논문집
• /
• 제33권3호
• /
• pp.1243-1251
• /
• 2013

본 연구의 목적은 텐션클램프의 초기 체결력이 급곡선 궤도용 탄성레일체결장치의 성능에 미치는 영향을 검토함에 있다. 이를 위해 본 연구에서는 탄성레일체결장치의 구성품 중 텐션클램프의 거동을 평가하기 위해 초기 체결력의 변화와 횡압의 증가를 고려한 실내시험, 현장측정 및 수치해석을 수행하였다. 수치해석 및 실험결과, 초기 체결력의 감소는 텐션클램프에 도입되는 초기 압축응력의 감소로 나타났다. 또한 텐션클램프의 압축응력은 급곡선 궤도에서 발생하는 횡압의 작용에 따라 인장응력으로 변환되는 것으로 나타났다. 따라서 초기 체결력에 의해 텐션클램프에 도입된 압축응력은 외력에 따른 발생 인장응력 저감을 위한 보강력으로 작용하는 것으로 분석되어, 탄성레일체결장치의 장기 내구성능 확보와 안정적인 거동을 유지하기 위해서는 적정 초기 체결력의 확보가 중요한 것으로 나타났다.

• 한국철도학회논문집
• /
• 제18권3호
• /
• pp.212-222
• /
• 2015

도심 내의 트램 노선 설계 및 건설에서 환경 소음 문제를 해결하기 위해서는 트램 시스템의 소음 방사특성을 파악하여야 한다. 본 논문에서는 트램 시험 차량에 대한 전동 소음 특성을 연구하였으며, 전동 소음 관점에서의 레일 지지 구조의 적절한 강성을 검토하였다. 매립형 궤도와 탄성차륜의 모빌리티를 Timoshenko 보 모델과 유한 요소 모델을 각각 이용하여 구하였고, 측정값과 비교하였다. 선로변 방출 소음도에 대한 계산값을 측정값과 비교한 결과 300Hz 이상의 주파수 대역에서 작은 오차를 내었다. 레일 및 슬라브 지지 강성을 변화시켜가면서 레일 및 차륜의 소음원 강도를 분석하였으며, 지반 진동을 과다하게 유발하지 않으면서 레일 및 차륜으로부터 방사되는 소음이 감소될 수 있는 적정 지지 강성을 검토하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제14권5호
• /
• pp.93-101
• /
• 2010

열차의 제동 및 궤도의 조도가 교량의 동적 거동에 미치는 영향에 대하여 연구하였다. 교량구간에서 열차와 교량의 상호작용과 연행하중효과를 라그랑주 운동방정식을 사용하여 고려하였다. 뉴마크 직접적분법을 사용하여 유도한 운동방정식의 해를 구하였으며, 조도성분에 대한 고려는 레일의 조도성분에 대한 PSD 제안 곡선을 사용하였다. 열차의 급제동에 따른 제동효과에 대한 고려는 ASTM E503-82에서의 감속도의 변화량을 근간으로 미끄럼저항을 모형화하였으며, 제동시의 구름저항은 고려치 않았다. 단순지지된 교량과 열차 1량에 대한 예제를 통해 이 연구에서 제안된 방법에 대한 수치적 검증과 매개변수해석을 수행하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.380-386
• /
• 2008

The development of a new railway vehicle is under progress through the Next Generation High-Speed Rail Development Project in Korea. Its aim is to develope fundamental technology of the vehicle that can run over 400km/h. The new distributed traction bogie system, 'HEMU'(High-speed Electric Multiple Unit), will be used and is different from that of previously developed high speed railway vehicles. Previous vehicles adopted push-pull type system, which means one traction-car drives rest all of the vehicle. Due to the difference, investigation on dynamic behavior and its safety evaluation are necessary, as a part of verification of the design specification. In the paper, current progresses of researches are presented. And the High-Speed Railway vehicle system is evaluated for a dynamic characteristic simulation. Proper dynamic models including air-suspension system, wheel-rail, bogie and car-body is developed according to the vehicle simulation scenario. The basic platform for the development of dynamic solver is prepared using nodal, modal coordinate system and wheel-rail contact module. Operating scenario is prepared using commercial dynamic analysis program and used for development of dynamic model, which contains many parts such as carbodies, bogies and suspension systems. Furthermore, international safety standard is applied for final verification of the system. Finally, the reliability of the dynamic model will be verified with test results in the further researches. This research will propose a better solution when test results shows a problem in the parts and elements. Finally, the vehicle that has excellent performance will be developed, promoting academic achievement and technical development.