• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 춘계학술대회 논문집
• /
• pp.1103-1104
• /
• 2009

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 춘계학술대회 논문집
• /
• pp.195-196
• /
• 2009

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2009년도 추계학술대회 논문집
• /
• pp.773-774
• /
• 2009

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 춘계학술대회 논문집
• /
• pp.819-820
• /
• 2007

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1998년도 창립기념 춘계학술대회 논문집
• /
• pp.517-524
• /
• 1998

A liner numerical model of the wheel-rail interation and the track geometry is developed for multi-body dynamics program. The simulation results are very simulation to these of VAMPIRE simulation. This program can be used for the analysis of train dynamic performance.

• Steel and Composite Structures
• /
• 제37권3호
• /
• pp.291-306
• /
• 2020

The noise from the elevated lines of rail transit has become a growing problem. This paper presents a new method for the rapid prediction of the structure-borne noise from steel or composite bridges, based on the receptance and Statistical Energy Analysis (SEA), which is essential to the study of the generation mechanism and the design of a low-noise bridge. First, the vertical track-bridge coupled vibration equations in the frequency domain are constructed by simplifying the rail and the bridge as an infinite Timoshenko beam and a finite Euler-Bernoulli beam respectively. Second, all wheel/rail forces acting upon the track are computed by taking a moving wheel-rail roughness spectrum as the excitation to the train-track-bridge system. The displacements of rail and bridge are obtained by substituting wheel/rail forces into the track-bridge coupled vibration equations, and all spring forces on the bridge are calculated by multiplying the stiffness by the deformation of each spring. Then, the input power to the bridge in the SEA model is derived from spring forces and the bridge receptance. The vibration response of the bridge is derived from the solution to the power balance equations of the bridge, and then the structure-borne noise from the bridge is obtained. Finally, a tri-span continuous steel-concrete composite bridge is taken as a numerical example, and the theoretical calculations in terms of the vibration and noise induced by a passing train agree well with the field measurements, verifying the method. The influence of various factors on wheel/rail and spring forces is investigated to simplify the train-track-bridge interaction calculation for predicting the vibration and noise from steel or composite bridges.

• 대한기계학회논문집A
• /
• 제38권7호
• /
• pp.699-709
• /
• 2014

본 논문에서는 단일윤축 탈선이론을 적용하여 측풍 조건에서 주행 중인 철도차량의 탈선을 예측하는 방법을 제시하였다. 기존 연구에서는 측풍에 의한 탈선은 모두 전복탈선이라고 가정하여 탈선 예측 이론을 개발하였다. 그러나 이러한 가정은 특수한 주행조건하에서 차륜 타고오름 탈선의 가능성을 무시하고 있다. 또 기존의 측풍 탈선 이론은 주행 중 발생하는 차륜-궤도 사이의 마찰력, 동적상호작용과 같은 주행조건이 탈선에 미치는 영향을 고려할 수 없었다. 본 논문의 방법은 차륜-궤도 사이의 동적 영향, 횡가속도 및 켄트 영향, 측풍 영향 등을 동시에 고려할 수 있었다. 본 이론의 결과를 기존 이론 및 시뮬레이션 결과와 비교하여 타당성을 검증하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 춘계학술대회 논문집
• /
• pp.627-632
• /
• 2003

Squeal noise is generated by railway vehicles transversing tight curves. This squeal has always been noticed as one of the most disturbing noise sourecs of railway systems. At present we cannot predicted squeal noise that is influenced by a large number of dependent parameters. But the application of wheel damping and rail lubrication have successfully reduced wheel squeal. In this study, we measured squeal noise to find out the reduction effectiveness of noise through rail lubricator.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.1281-1286
• /
• 2005

This study shows organizational designs to increase the coordination between infrastructure and rolling stock operation organizations after rail reform based on wheel/rail interface and train/track interaction. Information sharing, face-to-face meeting, liaison role, task force, manager responsible for coordination, and team organization could help to coordinate infrastructure construction plan and train operation plan. It is necessary for the organizations to begin to study the interaction between track and train in Korean environments to make the coordination more efficient.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.62-68
• /
• 2011

This is a testing equipment system to analyze variation of creep force according to wheel-rail tread profile, running speed of vehicle, vertical and lateral force, wheel/rail contact point, attack angle and so on. In this paper, derailment occur in stages until the change of each parameter, while reproducing the actual situation was derailed. Thus, to derail what is the most influencing factors were analyzed.