• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 추계학술대회 논문집
• /
• pp.1057-1058
• /
• 2010

• 한국철도학회논문집
• /
• 제9권5호
• /
• pp.618-623
• /
• 2006

Understanding the contact between wheel and rail is a starting point in railway vehicle dynamic research area and especially analysis for the contact geometry between wheel and rail is important. On the one hand, the critical speed as the natural characteristics of rolling-stock is generally tested on the roller rig. The geometrical characteristics of the wheel/roller contact on the roller rig are different from these of the general wheel/rail contact because the longitudinal radius of roller is not infinite compared with rail. Thus, in this paper we developed the algorithm to analyze the wheel/roller contact geometry of our roller rig which is constructed now and analyzed the difference between whee/roller contact and wheel/rail contact. In conclusion, we found that the yaw motion of wheelset and the roller radius influence the geometrical contact parameters in wheel flange contact area.

• 한국철도학회논문집
• /
• 제10권6호
• /
• pp.806-811
• /
• 2007

탈선은 차륜 플렌지가 레일에 접촉할 때 발생하는 횡방향의 힘이 커져 차륜이 레일을 이탈하는 현상이다. 탈선 또는 주행안전도를 평가하는 대표적인 기준은 탈선계수이다. 차륜에 스트레인게이지를 부착하여 탈선계수를 측정하는 기존방법은 대단히 복잡하고 측정의 실패확률도 높으며, 고도의 측정기술과 고가의 비용이 요구되고 있다. 따라서 안전성확인이 필요한 그 시점에 즉시 확인하지 못하고 있어 안전확보에 어려움을 겪고 있다. 본 논문에서는 차륜과 레일간의 접촉력인 윤중과 횡압을 쉽게 측정할 수 있는 방안을 집중적으로 연구하였으며, 가속도과 변위의 거동만으로 탈선 가능성을 예측할 수 있는 새로운 탈선계수 측정방법을 제시하였다.

• 대한기계학회논문집A
• /
• 제40권6호
• /
• pp.547-555
• /
• 2016

철도차량의 휠의 마모는 주로 곡선 주행 시 발생한다. 휠의 형상 변화는 차량 동적 안정성에 중요한 영향을 미친다. 본 연구에서는 곡선 주행 시 휠 마모 특성 분석을 위해 곡선 반경 크기와 속도를 변경시키면서 휠 마모량을 계산하였다. 다물체 동역학 해석에 기초한 차량 동역학 해석결과로부터 마모인자를 계산하고 BRR(British Rail Research)에서 제시한 마모 모델을 이용하여 휠의 마모량을 계산하였다. 반경 300m에서의 마모량이 다른 반경과 비교하여 매우 큰 것으로 나타났다. 곡선 선로에 윤활유를 도유하는 경우 마모 특성 변화를 분석하기 위해 휠의 답면과 플랜지 부위의 마찰계수를 다르게 하여 휠 마모량을 계산하였다. 도유 시 휠 마모의 개선 효과를 여러 반경에서 계산하고 실제 도시철도구간에서 마모 개선 효과를 확인하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1270-1276
• /
• 2003

This paper describes an analytical method for wheel wear prediction. The outputs from vehicle dynamic software are used to calculation the wheel wear. Two calculation examples are shown for a high-speed line and a conventional line. Through the comparison of two cases, we can see the wheel wear characteristics on the conventional line and the high-speed line. The conventional line has many curved tracks that cause severe wheel flange wear. The influences of curve radius on wheel wear are also described considering the operational performance of the high speed trainset. A method of calculation using contact patch work model is presented for determination of the evolution by wear railway wheels.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.535-538
• /
• 1997

Studied in this paper was the lateral displacement of railway vehicle using the multi-body dynamic simulation program (VAMPIRE) and the BASS 501. The lateral displacement of railway vehicle is occurred by thc clearance between wheel flange and rail, the track irregularity, the property of each suspension of vehicle and the cant etc. The results of analysis shown that Vehicle is not interfere with subway platform in any conditions namely the tare and full load condition, the wheel. wear condition and the stationary and running of vehicle.

• 대한기계학회논문집A
• /
• 제37권2호
• /
• pp.177-185
• /
• 2013

본 논문에서는 윤중감소를 고려한 이론적 새로운 탈선계수 모델을 제시한다. 본 탈선계수 모델은 열차 충돌 원인 탈선현상을 예측할 수 있는 단일 윤축의 이론적 탈선모델을 바탕으로 도출한다. 현재 국내 탈선규정에서는 플랜지 각이 $60^{\circ}$ 이고 마찰계수가 0.3인 조건을 나달식에 적용하여 탈선계수를 구한 후 안전율을 적용하여 0.8을 규정하고 있으나, 플랜지 각이 변경되면 이론적 설명이 부족하게 된다. 따라서 제시한 탈선계수 이론모델을 이용하여 탈선계수 규정 값 0.8을 이론적으로 접근해본다. 또한 국내탈선규정에서 윤중 감소율을 50%까지 허용하고 있으나 명확한 규정근거를 제시하고 있지 않다. 따라서 윤중 규정 50%감소와 탈선계수 규정 값 0.8과의 상관 관계를 앞서 제시한 탈선계수 이론모델을 이용하여 이론적으로 규명한다. 마지막으로 동역학 시뮬레이션을 이용하여 탈선계수 이론모델의 타당성을 입증한다.

• 한국자동차공학회논문집
• /
• 제18권3호
• /
• pp.43-52
• /
• 2010

In this study, the shapes of the wheel and rail are represented by using 3-dimensional surface functions with surface parameters and a 3-dimensional wheel-rail contact analysis is presented. A whole numerical solution of wheel-rail contact at tread and flange including 2-point contacts can be achieved with the proposed numerical algorithm. Kinematic characteristics such as variances of vertical displacement and roll angle, and variance of wheel radius difference for arbitrary yaw and lateral displacement of wheelset, are determined for the KTX wheel-rail pair as an example. The condition of yaw and lateral displacement occurring 2-point contacts to analyze derailment are compared between standard and worn wheels. Differences of contact characteristics between curved and straight rails are also analyzed.

• Journal of Mechanical Science and Technology
• /
• 제19권spc1호
• /
• pp.411-421
• /
• 2005

The development and implementation of an appropriate methodology for the accurate geometric description of track models is proposed in the framework of multibody dynamics and it includes the representation of the track spatial geometry and its irregularities. The wheel and rail surfaces are parameterized to represent any wheel and rail profiles obtained from direct measurements or design requirements. A fully generic methodology to determine, online during the dynamic simulation, the coordinates of the contact points, even when the most general three dimensional motion of the wheelset with respect to the rails is proposed. This methodology is applied to study specific issues in railway dynamics such as the flange contact problem and lead and lag contact configurations. A formulation for the description of the normal contact forces, which result from the wheel-rail interaction, is also presented. The tangential creep forces and moments that develop in the wheel-rail contact area are evaluated using : Kalker linear theory ; Heuristic force method ; Polach formulation. The methodology is implemented in a general multibody code. The discussion is supported through the application of the methodology to the railway vehicle ML95, used by the Lisbon metro company.

• 대한기계학회논문집A
• /
• 제31권7호
• /
• pp.756-763
• /
• 2007

The majority of catastrophic wheel failures are caused by surface opening fatigue cracks either in the wheel tread or wheel flange areas. The inclined cracks at railway wheel tread are initiated and the cracks are caused by wheel damage-spatting after 60,000 km running. Because the failured railway wheel is reprofiled before regular wheel reprofiling, the maintenance cost for the railway wheel is increased. Therefore, it is necessary to analyze the mechanism for initiation of crack. In the present paper, the combined effect on railway wheels of a periodically varying contact pressure and an intermittent thermal braking loading is investigated. To analyze damage cause for railway wheels, the measurements for replication of wheel surface and the effect of braking application in field test are carried out. The result shows that the damages in railway wheel tread are due to combination of thermal loading and ratcheting.