• Journal of Biosystems Engineering
• /
• 제21권1호
• /
• pp.34-43
• /
• 1996

The present pesticide application technology widely used with a power sprayer in Korea is assessed as the problem awaiting solution in the point of view of its ineffectiveness, inefficiency, and environmental contamination. As one approach to get rid of these problems, the boom spraying with ultra-low volume and precision application technology has been recommended. The study was undertaken to investigate plants damages incurred by the self-propelled boom-sprayer vehicle, to develop the design criteria of vehicle wheel, and to compare plant damages caused by the front wheel steering vehicle, the 4-wheel drive vehicle and the articulated vehicle, by the computer simulation. The experiment showed that the amount of damaged plants incurred by the self-propelled boom sprayer were about 0.29% in average in the field size of 100m$\times$50m(0.5ha), about 60~80% of which recovering while growing. The recommandable wheel size was analyzed to be 70~100cm in diameter, 8~15cm in width from the vehicle-plant-soil relationship. The simulation on damaged plants anticipated to be incurred by various steering vehicles showed that the smaller the turning radius, the lesser the damaged plants within its range of 3~5m. Average plant damage rate by the front wheel steering vehicle, the 4-wheel drive vehicle and articulated vehicle was relatively assessed to be 2 : 1.8 : 1.

• 한국자동차공학회논문집
• /
• 제14권6호
• /
• pp.95-103
• /
• 2006

Wheel treads of E.M.U. are usually under a heavy thermal load by brake frictional heat between wheel and brake shoe and damaged by repeated thermal and mechanical loads. To examine the cause of wheel tread damage of E.M.U.'s in service running, a systematic approach has been used. This study is composed of three parts. Frictional heat analysis was conducted in the first part by finite element method. Two kinds of brake shoes in service were considered. In the second part, experimental study was carried out on a brake dynamometer. Temperatures were measured for the two brake shoes. And experimental study in service running E.M.U.'s was performed. Wheel and brake shoe temperatures were measured by using thermocouples and temperature indicating strips. Finally metallurgical characteristics were examined by a SEM/EDS and the cause of the wheel damage was analyzed. It seems that aggregated ferrous component is a main cause of the wheel tread damage.

• 대한기계학회논문집A
• /
• 제31권7호
• /
• pp.756-763
• /
• 2007

The majority of catastrophic wheel failures are caused by surface opening fatigue cracks either in the wheel tread or wheel flange areas. The inclined cracks at railway wheel tread are initiated and the cracks are caused by wheel damage-spatting after 60,000 km running. Because the failured railway wheel is reprofiled before regular wheel reprofiling, the maintenance cost for the railway wheel is increased. Therefore, it is necessary to analyze the mechanism for initiation of crack. In the present paper, the combined effect on railway wheels of a periodically varying contact pressure and an intermittent thermal braking loading is investigated. To analyze damage cause for railway wheels, the measurements for replication of wheel surface and the effect of braking application in field test are carried out. The result shows that the damages in railway wheel tread are due to combination of thermal loading and ratcheting.

• 한국안전학회지
• /
• 제26권3호
• /
• pp.1-7
• /
• 2011

Fatigue damage on the train wheel surface was estimated by considering the effect of friction coefficient of rolling on the contact surface between the wheel and rail during operation. From FEM analys, the maximum Tresca stress was 550.7 MPa at a depth of 2.07 mm under the maximum contact pressure ($P_{max}$ = 894.3 MPa) between wheel and rail. The maximum stress continued to increase along with the increase in the frictional coefficient. The fatigue initiation lifetime of the wheel by the rolling contact was predicted using the Smith-Watson-Topper (SWT) equation and the maximum principal strain equation (${\varepsilon}$-N).

• 한국정밀공학회지
• /
• 제31권9호
• /
• pp.783-790
• /
• 2014

Railway wheels and axles are the most critical parts of the railway rolling stock. The wheel carry axle loads and guide the vehicles on the track. Therefore, the contact surface of wheel are subjected to wear and fatigue process. The wheel damage can be divided into three types; wear, contact fatigue failure and thermal crack due to braking. Therefore, in the contact surface between the wheel and the rail, the materials are heat treated to have a specific hardness. The manufacturing quality of the wheel have a considerable influence on the formation of tread wear and damage. Also, the residual stress on wheel is formed during the manufacturing process is one of the main sources of the damage. In this paper, the mechanical characteristic and the residual stress according to wheel material have been evaluated by applying finite element analysis and conducting mechanical tests.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1996년도 학술발표대회 논문집
• /
• pp.17-21
• /
• 1996

• 한국생산제조학회지
• /
• 제19권6호
• /
• pp.753-759
• /
• 2010

The variable fatigue load is simulated in this study. The stability and the life of the material are analyzed theoretically by Ansys program. These results are successfully applied to the practical wheel to predict the prevention of fracture and the endurance. The life and the damage on the every part of the fatigue specimen can be predicted. As the available lives are compared for every loading variation, the rain flow and damage matrix results can be helpful in determining the effects of small stress cycles in any loading history. The rainbow and damage matrices illustrate the possible effects of infinite life. The safety and stability of wheel and the other practical structures according to the variable load can be estimated by using the results of this study.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.318-325
• /
• 2005

In present, KTX's wheel is worn inevitably according to the interaction with rail in service. It was analyzed by wearing type, damage type and wheel reprofiling cycle on the running surface. As a result, damage on the running surface is main cause to reprofile the wheel. Wearing type of wheel is normal and it hasn't reprofiled according to normal wheel wear. As a follow-up result of the whee] defects on the running surface, if the defects size is well managed by periodical inspection, it would be efficient to increase the wheel life.

• 한국생산제조학회지
• /
• 제21권3호
• /
• pp.451-458
• /
• 2012

This study aims at the structural analysis with fatigue according to the configuration of railway vehicle wheel. Maximum equivalent stress or deformation is shown at the lower face in contact with wheel and rail. As model B has the maximum stress or deformation which becomes lower than model A, model B is shown to have more durability than model A. Among the cases of nonuniform fatigue loads, 'SAE bracket history' with the severest change of load becomes most unstable but 'Sample history' becomes most stable. In case of 'Sample history' with the average stress of 0 to $-10^{11}$ Pa and the amplitude stress of 0 to $10^{10}$ Pa, the possibility of maximum damage becomes 3%. This stress state can be shown with 6 times more than the damage possibility of 'SAE Bracket history' or 'SAE transmission'. The structural result of this study can be effectively utilized with the design of railway vehicle wheel by prevention and durability against its damage.

• 한국철도학회논문집
• /
• 제11권6호
• /
• pp.524-529
• /
• 2008

도시철도 차륜에서 손상된 차륜은 주행 중의 승차감 악화 및 보수비용의 증가로 이어질 수 있기 때문에 차륜답면 특성 변화에 대한 평가는 대단히 중요하다. 본 연구에서는 비파괴적 표면검사법을 이용하여 차륜답면의 손상 평가를 실시하였으며 접촉위치, 주행거리, 제동방식에 따라 차륜답면의 특성을 평가하였다. 그 결과 접촉위치에 따라 차륜답면이 현저히 다른 손상 특성을 나타남을 보여주고 있다.