• Journal of the Korea Academia-Industrial cooperation Society
• /
• 제6권3호
• /
• pp.273-277
• /
• 2005

We prepared $0.25\~l.5um$ poly silicon gate array test group with $SiO_2$ spacers in order to employ NiCo composite salicide process from 15nm Ni/15nm Co/poly structure. We investigate the residual metal shape evolution by varying the rapid thermal silicide anneal temperature from $700^{\circ}C\;to\;1100^{\circ}C$. We observed the residual metals agglomerated into maze type and line type on $SiO_2$ field and silicide gate, respectively as temperature increased. We propose that lower silicide temperature would be favorable in newly proposed NiCo salicide in order to lessen the agglomeration causing the leakage and scum formation.

• Journal of Korean Society for Atmospheric Environment
• /
• 제11권1호
• /
• pp.57-68
• /
• 1995

Precipitation samples were collected by a wet-only automatic acid precipitation sampler at Kangwha island on the western coast in Korea, through January until December 1992. pH, electric conductivity and the concentrations of major water-soluble ion components such as N $H_{4}$$^{+}$, $Ca^{2+}$, $K^{+}$, $Mg^{2+}$, N $a^{+}$, N $O_{3}$$^{[-10]}$ , S $O_{4}$$^{2-}$ and C $l^{[-10]}$ were measured. From the result of checking the validity for assesment of pollution level of precipitation samples by pH using correlation analysis between pH and major components, and t-test of chemical composition between acid rain and non-acid rain, pH proved to be not satisfactory for its pillution level. A more comprehensive method is therefore required. In order to estimate the monthly analytical result of chemical composition of precipitation samples comprehensively, a cluster analysis was used among the various multivariate statistical analysis. As a result of making a cluster analysis for separating the monthly precipitation samples into homogeneous patterns by setting the concentrations of nine major water-soluble ion components as a variable, three homogeneous patterns were obtained. The first pattern was a group of months having average ion concentrations, the second a guoup of months having low ion concentration, and the third a group of months having high ion concentrations. Thus, it was indicated that the pollution level of precipitation was higher on February and lower on May, June, August and September than the other months. As a result, this analysis method could be estimated the chemical coposition of precipitation regionally as well as monthly.monthly.

• Korean journal of food and cookery science
• /
• 제28권6호
• /
• pp.703-709
• /
• 2012

Using market-selling rice flour, four rice wet noodles were prepared with three hydrocolloids: wheat flour, hydroxypropyl methyl cellulose (HPMC), and potato starch at different levels based on pre-test, and the physical and sensory properties of the noodles were measured and compared. The rice noodle with hydrocolloids showed much higher peak and final viscosity than wheat flour noodle (control). Rice noodle also showed higher hardness, cohesiveness and springiness than control in textural properties, however, the noodle with the highest hydrocolloids (wheat flour 15%, HPMC 12.5%, potato starch 17,5%) showed lowest cohesiveness and springiness values among samples. By sensory evaluation, the rice noodle with 15% wheat flour, 8.5% HPMC, 17.5% potato starch showed the highest scores in appearance, taste, texture and acceptability. HPMC in noodles seemed to influence on the noodle quality than potato starch or wheat flour. For making rice noodle, adequate level of hydrocolloids could improve noodle quality such as viscoelasticity, however, excess addition made the noodle coarse.

• Magazine of the Korean Society of Agricultural Engineers
• /
• 제17권1호
• /
• pp.3655-3665
• /
• 1975

This study was intended to develop a method for measuring the grain separating performance of threshers. The grain separating apparatus used for the experiment was designed and constructed, the function of which was to separate pneumatically mature and immature grain, chaff, straw, dust, and other impurities from the products of threshing. The apparatus has five material outlets where grains and impurities are fallen down by separation depending upon the specific gravity of the material white it moves above the outlets. The principle of design was to separate the mixture of mature grain, immature grain and chaff as distinct as possible, and to induce the mature grains onto the first outlet, the immature grains onto the second and the third, and the straw wastes onto the forth and the fifth outlets. The developed apparatus was tested to evaluate its separating performance with two rice varieties (Tongil and Mine-hikari) at different moisture levels and air velocities. The optimum conditions for operating the apparatus were found from experiment. The results are summarized as follows; 1. The degrees of separation, especially the amount of immature grain contained in the mature paddy, were dependent upon air speed delivered. The optimum air velocities for this apparatus for each levels of grain moisture contents were found from a series of experiments as follows; 14.7-15.3m/sec. for grain of 16 percent moisture content in wet basis, 15.3-16.0m/sec. for 20 percent, and 16.0-16.4m/sec for 24 percent. 2. Composition ratios determined based on the brine separating method was fairly well acted upon the developed apparatus, indicating its recollecting rate of the mature grains as 97.6 to 99.9 percent. The developed separatus acted similarly upon the two rice varieties which had different composition of immature paddy grain. In other words, the separating performance by the apparatus had a good correlation with the one by the brine separating method. 3. As immature grains were separated out unsatisfactory in these experiments than the brine separating method, further investigation may be needed to improve a separating performance of these materials. But the results obtained suggested a possibility of using the tester to replace the current hand separating method, ther eby enabling more consistent test results and also eliminating nearly all costly hand seperating operations.

• Journal of the Korean Society of Clothing and Textiles
• /
• 제17권1호
• /
• pp.151-161
• /
• 1993

The purpose of this study was to investigate the effect of hydrophilic finish for polyester (PET) fabric and hydrophobic finish for cotton fabric on the water transport and comfort properties. Polyester fabric was treated with 10% sodium hydroxide solution to impart hydrophilicity. Cotton fabric was sprayed with Scotch-gard$^{(R)}$ water and oil repellent finish to impart hydrophobicity. Porosity, air permeability, contact angle, wickability and water vapor transport rate (WVTR) were measured to determine the water transport properties of fabrics. To compare the comfort properties of treated and untreated fabrics, wear test was performed by putting fabric patches on the upper back: stratum corneum water content (SCWC), subjective wettedness and comfort rating were determined. The results were as follows: (1) The contact angle of water on treated polyester fabric was decreased and that of treated cotton fabric was increased. Also, the wickability of treated polyester fabric was increased and the wickability of cotton fabric was decreased. (2) Although each finish did not change porosity, the water vapor transport rate of treated polyester fabric was increased and that of treated cotton fabric was decreased slightly. (3) The results of stratum corneum water content measurements showed good agreement with the results of the contact angle and the wickability, i.e., the better the liquid water transport properties are, the less the stratum corneum water contents were resulted. (4) The realtionship of subjective wettedness or comfort and stratum corneum water content was independent. Therefore, it was concluded that human perception on the subjective wettedness or the comfort is affected by the skin contact of wet fabric rather than by the stratum corneum water content.

• Journal of Preventive Medicine and Public Health
• /
• 제17권1호
• /
• pp.289-294
• /
• 1984

The energy expended while playing tennis was determined from the players heart rate and from the amount of oxygen they consumed. This study was made using eight healthy but unathletic male college students. Expired air was collected for 2 minute periods during each game by the Douglas bag method. Samples were collected when serving and receiving. The air collected was measured using a wet test gas meter. The amount of air collected was expressed in STPD. Oxygen consumption was determined by measuring the oxygen content of the expired air with a Orzat gas analyzer. The energy expended during the tennis games was calculated indirectly. The caloric coefficient of oxygen was multiplied by the volume of oxygen consumed. The caloric coefficient of oxygen varied from 4.6 to 5.1 kcal/liter of oxygen. In this study the value of 5 kcal/liter of oxygen was used in the calculations. The accuracy of the measurements of energy expended was tested using regression analysis of the measured volume of oxygen. The mean values of heart rate, oxygen consumed and energy expended did not vary when the activity of serving and receiving was compared. The mean value of oxygen consumed during play was $1.4329{\pm}282ml/min$ or $21.6{\pm}4.0ml/kg/min$. The energy expended was $7.15{\pm}1.46kcal/min$ or $6.45{\pm}1.23kcal/kg/min$. The values were equivalent to 5.5 mets. When the levels of oxygen consumed were estimated using the formulas, they were found to be higher than the measured levels. The estimated amounts, however, were within 25% of the measured amounts.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• 제40권4호
• /
• pp.34-42
• /
• 2008

Generally, paper multilayering was performed before wet pressing process. However, sheets whose characteristics are different could be put together at the dry state by adhesives for the specialty paper products. In this paper, potential adhesives such as PVAc, oxidised starch, latex, and PVA were chosen and multilayering of several sheets was performed in laboratory scale. The effects of base paper properties and the composition of adhesives on the physical properties of multilayering paper were investigated. Physical properties such as bonding strength and stiffness were measured. For the practical reasons, mill trial was also executed. According to the result of laboratory tests and mill trial test, the physical properties of multilayered paper were greatly affected by the composition of adhesives and it was found that PVAc showed the best performance in all its aspects among four adhesives. Oxidised starch had an advantage of high stiffness and PVA gave high bonding strength to the multilayered paper. And it was also found that the properties of base paper showed the great influences not only on multilayering process, but also on the physical properties of the multilayered paper.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• 제30권6_1호
• /
• pp.575-581
• /
• 2012

In general, various modeling and estimation techniques have been proposed to extract the tropospheric and ionospheric delays from the GPS CORS. In this study, Kalman filter approach is adopted to estimate the tropospheric and ionospheric delays and the proper modeling for the state vector and the variance-covariance matrix for the process noises are performed. The coordinates of reference stations and the zenith wet delays are estimated with the assumption of random walk stochastic process. Also, the first-order Gauss-Markov stochastic process is applied to compute the ionospheric effects. For the evaluation of the proposed modeling technique, Kalman filter algorithm is implemented and the numerical test is performed with the CORS data. The results show that the atmospheric effects can be estimated successfully and, as a consequence, can be used for the generation of VRS data.

• Korean Journal of Medicinal Crop Science
• /
• 제26권5호
• /
• pp.401-407
• /
• 2018

Background: In Korea, seeds of Panax ginseng C. A. Meyer need to be stored under cold temperature and high humidity condition for months to break physiological dormancy, making storage difficult until spring-sowing. This study was conducted to test the effects of seed storage conditions and seed treatment on the emergence of seedling after spring-sowing in a nursery greenhouse. Methods and Results: After dehiscence, endocarp dried seeds in mild or completely, and wet seeds were stored in $2^{\circ}C$ and $-3.5^{\circ}C$ during winter. Storage at $-3.5^{\circ}C$ resulted in a lower emergence rate (ER) than that at $2^{\circ}C$, and additional cold ($2^{\circ}C$) treatment before or after storage at $-3.5^{\circ}C$ increased the ER. Endocarp dehydration prevented pre-germination at $2^{\circ}C$ storage and increased the ER of seeds stored at $-3.5^{\circ}C$. ER was also dependent on the batch of seeds. However, seed treatments before sowing had only limited effects on ER. Root loss was the main reason for damping-off; prolonged cold storage of seeds increased damping-off, as the detection of pathogens was not high. Conclusions: This study showed that storage conditions such as temperature and moisture content of seeds, affect the ER after spring-sowing and vitality of seedlings, suggesting further attention on seed control for secure seedling stands after spring-sowing.

• Journal of Pharmaceutical Investigation
• /
• 제25권3호
• /
• pp.205-211
• /
• 1995

To increase the solubility of iodine and iodine releasing agents, which are used widely as a topical broad spectrum antiseptics and disinfectant sanitizers, its inclusion complexes were prepared and studied. Inclusion complexes of iodine with ${\beta}-cyclodextrin$ were prepared by coprecipitation method and complex formation was acertained by differential scanning calorimetry and microscopic observation. Iodine content of inclusion complex was determined by means of iodometry. Tablets containing inclusion complex were manufactured with sugar, citric acid, magnesium stearate, dextrose. Stability of inclusion complexes and tablets was evaluated by accelerated stability test, and comparing with PVP-iodine. During preparation, use of 50% ethanol solution is preferable to water as the medium because the former resulted in more stable complex for a month under accelerated storage conditions. Solubility of iodine in KI aqueous solution was 0.048 g/ml and lower than in 50% ethanol solution. Inclusion complex and its tablets were very stable at severe condition for one month, and comparable to PVP-iodine in the aspect of stability. Inclusion complex tabletswere not affected with citric acid, sugar, dextrose, and direct tableting method was recommendable because wet granulation using ethanol gave some release of included iodine during process.