• 제목/요약/키워드: Wet End

검색결과 167건 처리시간 0.029초

기계환기로 인한 백서의 급성 폐손상에서 Matrix Metalloproteinase Inhibitor의 효과 (Effects of Matrix Metalloproteinase Inhibitor on Ventilator-Induced Lung Injury in Rats)

  • 김제형;박수연;허규영;이승헌;이상엽;박상면;서인범;신철;심재정;인광호;강경호;유세화
    • Tuberculosis and Respiratory Diseases
    • /
    • 제53권6호
    • /
    • pp.619-634
    • /
    • 2002
  • 배 경 : Matrix metalloproteinase(MMPs), 특히 주로 염증세포에서 분비되는 MMP-9은 여러 가지 급성폐손상 모델 및 급성호흡곤란증후군 환자에서 증가하고, 최근에는 주기적인 물리적 스트레스가 폐포대식세포 및 결체조직세포에서 MMP-9의 생성 및 활성을 증가시키는 것으로 보고된 바 있다. 따라서 본 연구에서는 기계환기로 인한 백서의 급성폐손상에서 MMP-9의 발현 및 MMP 억제제(MMPI)의 효과에 대해서 연구하고자 하였다. 방 법 : Sprague-Dawley 백서를 적은 일호흡량(tidal volume, $V_T$)과 적절한 호기말양압(positive end-expiratory pressure, PEEP)을 적용한 LVT군과 많은 일호흡량과 PEEP을 적용하지 않은 HVT군 및 동일한 조건에서 MMPI를 투여한 HVT+MMPI의 세 군으로 나누어 실험하였다. MMPI로는 CMT-3(chemically modified tetracycline-3)를 기계환기 3일 전부터 구강으로 투약하였다. 폐손상의 정도는 습건중량비와 급성 폐손상지수로 측정하였고, MMP-9의 발현은 면역조직화학염색으로 고찰하였다. 결 과 : 습건중량비, 급성 폐손상지수 및 MMP-9의 발현이 HVT 군에서 다른 두군에 비하여 유의하게 높았고(p<0.05), HVT+MMP군에서 HVT군에 비하여 폐손상의 정도 및 MMP-9의 발현이 현저하게 낮았다(p<0.05). 결과적으로 MMPI의 투여가 MMP-9의 발현을 저하시킴으로써 기계환기로 인한 폐손상의 정도를 유의하게 감소시키는 것으로 관찰되었다 결 론 : 많은 일호흡량과 PEEP을 적용치 않은 기계환기는 폐조직에서 MMP-9의 발현을 유의하게 증가시켜 폐손상을 유발하고, MMPI는 MMP-9의 작용을 억제함으로써 기계환기로 인한 폐손상의 정도를 유의하게 감소시키는 것으로 판단된다.

백서에서 저체온 전처치가 환기기유발폐손상 억제에 미치는 효과 (Effect of Hypothermia on the Prevention of Ventilator-Induced Lung Injury in Rats)

  • 임채만;홍상범;고윤석;심태선;이상도;김우성;김동순;김원동
    • Tuberculosis and Respiratory Diseases
    • /
    • 제50권5호
    • /
    • pp.540-548
    • /
    • 2001
  • Backgrounds : Because ventilator-induced lung injury is partly dependent on the intensity of vascular flow, we hypothesized that hypothermia may attenuate the degree of such an injury through a reduced cardiac output. Methods : Twenty-seven male Sprague-Dawley rats were randomly assigned to normothermia ($37{\pm}1^{\circ}C$)-injurious ventilation (NT-V) group (n=10), hypothermia ($27{\pm}1^{\circ}C$)-injurious ventilation (HT-V) group (n=10), or nonventilated control group (n=7). The two thermal groups were subjected to injurious mechanical ventilation for 20 min with peak airway pressure 30 cm $H_2O$ at zero positive end-expiratory pressure, which was translated to tidal volume $54{\pm}6\;ml$ in the NT-V group and $53{\pm}4\;ml$ in the HT-V group (p>0.05). Results : Pressure-volume (P-V) curve after the injurious ventilation was almost identical to the baseline P-V curve in the HT-V group, whereas it was shifted rightward in the NT-V group. On gross inspection, the lungs of the HT-V group appeared smaller in size, and showed less hemorrhage especially at the dependent regions, than the lungs of the NT-V group. [Wet lung weight (g)/body weight (kg)] ($1.6{\pm}0.1$ vs $2.4{\pm}1.2$ ; p=0.014) and [wet lung weight/dry lung weight] ($5.0{\pm}0.1$ vs $6.1{\pm}0.8$ ; p=0.046) of the HT-V group were both lower than those of the NT-V group, while not different from those of the control group($1.4{\pm}0.4$, $4.8{\pm}0.4$, respectively). Protein concentration of the BAL fluid of the HT-V group was lower than that of the NT-V group($1,374{\pm}726\;ug/ml$ vs $3,471{\pm}1,985\;ug/ml$;p=0.003). Lactic dehydrogenase level of the BAL fluid of the HT-V group was lower than that of the NT-V group ($0.18{\pm}0.10\;unit/ml$ vs $0.43{\pm}0.22\;unit/ml$;p=0.046). Conclusions : Hypothermia attenuated pulmonary hemorrhage, permeability pulmonary edema, and alveolar cellular injuries associated with injurious mechanical ventilation, and preserved normal P-V characteristics of the lung in rats.

  • PDF

펄프·제지 산업에서의 프랙탈 기하 원리 및 그 응용 (The Principles of Fractal Geometry and Its Applications for Pulp & Paper Industry)

  • 고영찬;박종문;신수정
    • 펄프종이기술
    • /
    • 제47권4호
    • /
    • pp.177-186
    • /
    • 2015
  • Until Mandelbrot introduced the concept of fractal geometry and fractal dimension in early 1970s, it has been generally considered that the geometry of nature should be too complex and irregular to describe analytically or mathematically. Here fractal dimension indicates a non-integer number such as 0.5, 1.5, or 2.5 instead of only integers used in the traditional Euclidean geometry, i.e., 0 for point, 1 for line, 2 for area, and 3 for volume. Since his pioneering work on fractal geometry, the geometry of nature has been found fractal. Mandelbrot introduced the concept of fractal geometry. For example, fractal geometry has been found in mountains, coastlines, clouds, lightning, earthquakes, turbulence, trees and plants. Even human organs are found to be fractal. This suggests that the fractal geometry should be the law for Nature rather than the exception. Fractal geometry has a hierarchical structure consisting of the elements having the same shape, but the different sizes from the largest to the smallest. Thus, fractal geometry can be characterized by the similarity and hierarchical structure. A process requires driving energy to proceed. Otherwise, the process would stop. A hierarchical structure is considered ideal to generate such driving force. This explains why natural process or phenomena such as lightning, thunderstorm, earth quakes, and turbulence has fractal geometry. It would not be surprising to find that even the human organs such as the brain, the lung, and the circulatory system have fractal geometry. Until now, a normal frequency distribution (or Gaussian frequency distribution) has been commonly used to describe frequencies of an object. However, a log-normal frequency distribution has been most frequently found in natural phenomena and chemical processes such as corrosion and coagulation. It can be mathematically shown that if an object has a log-normal frequency distribution, it has fractal geometry. In other words, these two go hand in hand. Lastly, applying fractal principles is discussed, focusing on pulp and paper industry. The principles should be applicable to characterizing surface roughness, particle size distributions, and formation. They should be also applicable to wet-end chemistry for ideal mixing, felt and fabric design for papermaking process, dewatering, drying, creping, and post-converting such as laminating, embossing, and printing.

도심재생하천 내 수리적 특성이 열환경 변화에 미치는 영향 평가: 청계천을 대상으로 (Impact Assessment on the Change of Thermal Environment, According to the Hydraulic Characteristic Urban Regeneration Stream: Cheonggyecheon Case Study)

  • 김정호;이주승;윤용한
    • 환경정책연구
    • /
    • 제14권2호
    • /
    • pp.3-25
    • /
    • 2015
  • 도심재생하천 내부의 수리적 특성이 열환경 변화에 미치는 영향을 알아보고자 하천의 물리적 구조와 수리적 특성, 기상요소, 온열환경을 분석하였다. 연구 대상지는 복원된 도시하천으로서 큰 의의를 가지는 청계천을 선정하였다. 유형은 물리적 구조별 녹피율의 차이에 따라 유형 I(0.0%)과 유형 II(20.2%)로 구분하였다. 여울이 끝나는 Ba지점에서 수온은 $0.2^{\circ}C$ 감소, 유속은 0.7~0.9m/s 증가, 용존산소량은 0.5~0.6mg/L 증가하였으며, 기온은 평균 $1.1{\sim}1.4^{\circ}C$ 감소, 상대습도는 평균 6.6~8.7% 증가, 풍속은 불규칙한 변화를 보였다. 습구흑구온도지수 분석결과, 유형에 따른 상류부의 하천 내부와 수면 외부의 값의 차이는 미비하였으나, 유형 I의 하류부에서 감소폭은 $0.3{\sim}0.6^{\circ}C$, 유형 II는 $0.8^{\circ}C$ 등이었다. 기온저감의 효과는 수직높이로 유형 I의 경우 120cm, 유형 II는 140cm까지 영향이 있었으며, 거리별 기온저감의 효과는 유형 I의 경우 여울이 끝나는 Ba지점 이후로 증가하였고, 유형 II의 경우 지속해서 감소하였다.

  • PDF

라이너지 제지공장의 습부공정 모니터링 경험 (Wet-end Monitoring Experience in Liner Paper Mill)

  • 신종호;류정용;김용환;송봉근
    • 한국펄프종이공학회:학술대회논문집
    • /
    • 한국펄프종이공학회 2001년도 추계학술발표논문집
    • /
    • pp.57-58
    • /
    • 2001
  • 용수 다소비 산업으로 분류되는 제지공업의 특성 상, 용수사용의 억제 및 용수의 무방류화에 대한 압력이 증가되고 있는 반면, 초지환경은 날로 열악해지고 있는 실정이다. 한 예로써, 용지의 재활용율 및 재사용 비율이 증가함에 따라 원료의 저급화가 심 각한 수준에 이르고 있으며, 이러한 초지환경의 변화는 각질화되고 극도로 미세화된 다량의 미세섬유 발생 및 잡고지로부터 유입되는 점착성 이물질과 무기 충진제의 도입 등을 유발함으로서 제품의 물리적 성질 저하, 탈수부하 증가로 인한 생산성 저하, 약품사용량 증가 등을 초래하여, 결과적으로는 폐수처리장의 부하를 증대시킴과 동시에 청수사용량 및 폐수방류량을 증가시키는 악순환을 되풀이하게 된다. 국내 제지산업이 국제적 경쟁력을 갖추기 위해서는 제품의 증대가 필수적이나, 원료와 설비의존도를 감안할 때, 제품특성과 공정 분을 결정하는 습부공정을 정확히 파악하여 최적 운전조건을 확립하는 것이 가장 경제적이고 용이한 방법일 뿐만 아니라 전체 제지공정의 정정화에도 기여할 수 있을 것으로 판단된다. 일정규모이상의 종이를 생산하는 제지공장은 거의 대부분 컴퓨터로 처리되는 온라인 공정조절 시스템(On-line process control system)을 구비하고 료의 도입에서부터 설비운전 및 제품의 기본적인 품질관리까지 실시간의 자동화되고 안정적인 운전과 관리시스템을 유지하고 있다. 그러나 전체 제지공정 중, 제품 물성과 운전조건의 대부분을 결정하는 습부공정만큼은 아직도 주기적인 분석이 행해지고 있지 않을 뿐만 아니라, 슬러리의 농도나 보류도 정도를 제이하면 분석항목 조차도 변변히 확립되어 있지 않을 실정이다. 이는 다량의 물 속에 존재하게 되는 용전물질(Dissolved solids, DS), 부유물질(Suspended solids, SS), 섬 유(Fibers), 무기 미 세분(Inorganic f fines), 그리고 투입되는 약품간에 발생하는 계면동전현상 및 이러한 현상과 최종 지제 품의 물성간의 상관관계에 대한 이해 정도나 경험 부족에서 기인하는 것으로 생각된다. 1 1983년 미국제지기술연합회(T APpI)의 제지용 첨가제 분과위원회(Papermaking A Additive Committee)에서는 습부공정의 적절한 조절을 위해 어떤 항목들이 필요하며 그 중요도는 어떠한가를 조사하였으며, 그 결과로 전하밀도, 제타전위, 보류도 및 여수 도, 무기 미세분 함량 등이 중요하다고 보고하였다. 그러나 지료의 전기적 특성을 실시 간으로 측정하는 기자재류가 최근에 이르러서야 도입되고 있는 실정이기 때문에 충분 한 현장적용 사례가 보고되지 못하고 있으며, 결과적으로 얻어진 정보와 최종 지제품의 물성 및 초지기 운전조건과의 상관관계를 확립하는 작업결과는 더욱 찾아보기 어렵다. 따라서, 본 연구에서는, 라이너지 제조공장의 습부공정에 투입되는 약품이 지료 의 전기적 성질, 즉 전하밀도와 제타전위에 미치는 영향을 모니터링함으로서 지료의 전기적 성질들과 습부 공정상태와의 상관관계를 살펴보고자 하였다. 본 연구는 다음과 같은 순서로 진행하였다.

  • PDF

습부공정에 전하 중화개념의 도입 (Charge Neutralization of Wet-end)

  • 신종호;김동호;류정용;김용환;송봉근
    • 한국펄프종이공학회:학술대회논문집
    • /
    • 한국펄프종이공학회 2001년도 추계학술발표논문집
    • /
    • pp.59-59
    • /
    • 2001
  • 전보에서 발표한 바와 같이, 대상 라이너지 제조공장의 습부 운전조건이 지극히 악화되어 있으며 초지 시스템이 지종교체 등의 충격에 전혀 완충작용을 못하는 이유로 는 용수를 포함한 지료의 전하특성을 조절해주지 못하기 때문인 것으로 판단되었다. 특 히 양이온성 고분자로서 유일하게 사용하고 있는 보류향상제가 적절히 작용하지 못하 기 때문에 보류도가 저하되고, 제품내에 보류되지 못한 다량의 미세분이 백수 중에 존 재함으로서 결과적으로 지료의 전기적 특성을 더욱 악화시키는 악순환이 되풀이 되는 것으로 판단되었다. 이와 같이 강하게 음으로 하전된 지료의 전기적 특성을 조절하기 위해서는 양이온성 고분자의 사용량을 증가시키거나 고분자의 전하밀도 또는 분자량을 변화시켜 보는 것이 일반적인 습부첨가제 사용방법이라고 할 수 있다. 따라서 대상 습부공정의 조업조건을 호전시키기 위해서는 적절한 보류향상시스 템의 적용이 가장 시급한 현안이라고 판단되어 선규 보류제의 현장적용시험을 수행한 결과, 백수의 COD와 미세분이 격감하고 탈수성이 향상되어 습부공정의 운전조건이 호 전됨을 관측할 수 있었다. 그러나 2달 이상에 걸친 보류제 현장적용시험 기간 중에 생 산된 라이너지의 제반 물성들은 별다른 변화를 관측할 수 없었다. 이는 적용된 보류제 의 상당 부분이 계내의 미세분과 작용하여 소모되기 때문으로 판단되었다. 본 연구에서는 보류제의 투입 이전에 보류제와는 상대적으로 저분자량과 고 전 하밀도를 가진 고분자 전해질 4종을 사용하여 라이너지 지료의 전하를 중화시키고자 하였으며, 이러한 공정으로 생산된 라이너지의 물성변화를 관측하였다. 물성으로는 파 열강도, 압축강도, 습윤인장강도 및 염료 고착능력 등을 살펴보았다.시아노에틸화한 PYA가 안정된 분자구조를 유지하고 있음을 확인할 수 있었다. 시아노에틸화한 PYA용액의 점탄성 평가를 위하여 storage modulus와 loss modulus 를 분석하였다. 일반적 유변특성 평가 결과 PYA용액은 shear-thinning, pseudoplastic 한 특성을 나타내어 표면사이즈 공정에서의 적용 가능성을 확인할 수 있었다. 사용하는 통계기법 중의 하나인 주성분회귀분석을 실시하였다. 주성분 분석은 여러 개의 반응변수에 대하여 얻어진 다변량 자료의 다차원적인 변 수들을 축소, 요약하는 차원의 단순화와 더불어 서로 상관되어있는 반응변수들 상호간 의 복잡한 구조를 분석하는 기법이다. 본 발표에서는 공정 자료를 활용하여 인공신경망 과 주성분분석을 통해 공정 트러블의 발생에 영향 하는 인자들을 보다 현실적으로 추 정하고, 그 대책을 모색함으로써 이를 최소화할 수 있는 방안을 소개하고자 한다.금 빛 용사 둥과 같은 표면처리를 할 경우임의 소재 표면에 도금 및 용 사에 용이한 재료를 오버레이용접시킨 후 표면처리를 함으로써 보다 고품질의 표면층을 얻기위한 시도가 이루어지고 있다. 따라서 국내, 외의 오버레이 용접기술의 적용현황 및 대표적인 적용사례, 오버레이 용접기술 및 용접재료의 개발현황 둥을 중심으로 살펴봄으로서 아직 국내에서는 널리 알려지지 않은 본 기 술의 활용을 넓이고자 한다. within minimum time from beginning of the shutdown.및 12.36%, $101{\sim}200$일의 경우 12.78% 및 12.44%, 201일 이상의 경우 13.17% 및 11.30%로 201일 이상의 유기의 경우에만 대조구와 삭

  • PDF

표면 미세가공에서 Al 전극 및 Al 미세 구조물 제작을 위한 습식 식각 공정 (Wet Etch Process for the Fabrication of Al Electrodes and Al Microstructures in Surface Micromachining)

  • 김성운;백승준;이승기;조동일
    • 센서학회지
    • /
    • 제9권3호
    • /
    • pp.224-232
    • /
    • 2000
  • 표면 미세가공 공정에서 Al 공정을 이용하면 Al 전극의 제작에 의해 접촉 저항이나 선 저항 등을 줄여 전기적인 신호 손실을 줄일 수 있고, 산화막을 희생층으로 사용하는 간단한 공정에 의해 Al 구조물 제작이 가능한 장점을 지닌다. 그러나 실제 공정에서는 Al 전극이나 Al 구조물이 희생층 제거 시에 사용되는 HF 용액에 의해서 부식되는 문제점이 있다. 이러한 문제점을 해결하기 위해 사용되는 희생층 식각액인 BHF/glycerine 혼합 용액에 대한 PSG와 Al의 기본적인 식각 특성은 표면 미세가공에서 발생하는 구조적인 제한 조건에 따라 상당히 달라진다. 본 논문에서는 이러한 희생층의 구조적 특성과 Al 박막의 증착 표면 거칠기의 변화로 인한 식각 특성의 변화를 고려하여 실제로 표면 미세가공에 적용 가능한 혼합 용액의 조건을 조사하였다. 희생층 식각 조건변화에 따른 BHF/glycerine 혼합용액의 최적 혼합비는 $NH_4F$:HF:glycerine=2:1:2에서 가장 좋은 식각 선택비를 보이는 것으로 나타났으며 이 실험 결과를 실제 Al 전극 제작에 적용한 결과 Al 패턴이 희생층 식각액에 대해서 우수한 내식성을 보였다. 또한 Al의 식각액에 대한 내식성을 향상시키기 위하여 CMP 공정을 도입하여 증착 표면을 개선시켰으며 이를 Al 구조물의 제작에 적용하여 식각 특성을 분석하였다. 이러한 분석을 통해 본 논문에서 제시한 식각 조건을 이용하면 Al 전극과 Al 구조물을 표준적인 표면 미세가공 공정을 통하여 간단하게 제작할 수 있다.

  • PDF

Intestinal Growth and Development of Weanling Pigs in Response to Dietary Supplementation of Antibiotics, Phytogenic Products and Brewer's Yeast plus Bacillus Spores

  • Lee, C.-Young;Lim, Jung-Won;Ko, Young-Hyun;Kang, Sun-Young;Park, Man-Jong;Ko, Tae-Gu;Lee, Ji-Hoon;Hyun, Young;Jeong, Kyu-Sik;Jang, In-Surk
    • Journal of Animal Science and Technology
    • /
    • 제53권3호
    • /
    • pp.227-235
    • /
    • 2011
  • A total of 96 crossbred weanling barrows aged 21 days were randomly allocated to 32 pens of a new nursery to investigate the effects of antibiotics, phytogenics, and probiotics on intestinal growth and development. The animals were fed a set of three-phase basal diets containing 0.3% zinc oxide (CON) or the basal diets supplemented with 353 ppm of a combination of tiamulin, neomycin, chlortetracycline, and oxytetracycline (ANTI), 75 ppm triterpenoid saponin plus 150 ppm mixed saccharides (HERB; Sacchapin$^{(R)}$), or $1{\times}10^7$ brewer's yeasts plus $8{\times}10^7$ spores of each of Bacillus licheniformis and Bacillus subtilis per kilogram feed (PROBIO; Yeasture Plus 2B$^{(R)}$) for five weeks. Thirty-two pigs representing as many pens were slaughtered at the end of the feeding trial, after which morphological measures and digestive enzyme activities of intestinal mucosa were determined. Weight gain and gain:feed of the pigs were not affected by the dietary treatments (TRT) during the overall feeding trial. Total intestinal length was greater in PROBIO than in ANTI (P<0.05). Wet mucosa weight of the duodenum was not affected by TRT. However, jejunal mucosa weight was greater in PROBIO than in any other group sum of mucosa weights of the duodenum and jejunum was greater (P<0.05) in PROBIO than in ANTI and HERB. The height and width of duodenal villus were not affected by TRT, but crypt depth decreased (P<0.05) in response to HERB and PROBIO vs CON. Specific activities of alkaline phosphatase, sucrase, maltase, lactase, and leucine aminopeptidase in the duodenum and jejunum were not changed by TRT. In conclusion, results suggest that the present dietary treatments have no effects on growth performance of weanling pigs and that of PROBIO enhances intestinal growth and development under a clean experimental setting.

순천만 습지 및 조간대의 지화학적 특성 (Geochemical Characteristics in the costal wetland and intertidal zone of Suncheon Bay)

  • 김숙양;정규귀;김병만;이연규;최윤석;김신
    • 한국습지학회지
    • /
    • 제10권2호
    • /
    • pp.81-96
    • /
    • 2008
  • 순천만은 염분을 비롯하여 수질오염 파라미터인 COD, DIN, DIP는 지리 공간적으로 하천 말단부에서 높고 점차 낮아지는 하구의 전형적인 특성을 보이고 있으며, SPSS에 의한 상관분석 및 PCA 분석 결과 순천만 습지 및 조간대의 수질은 염분이 기타 수질항목을 조절하는 주요 요인으로 나타났다. 하천의 영향을 가깝게 받고 있는 저염분대와 염분이 높은 수역과는 영양염류의 거동이 다르게 나타났다. 퇴적물의 입도, 유기물 함량, 공극수의 영양염류, 퇴적인의 존재형태, 주요원소 화합물의 분포 등을 조사하였다. 순천만 상부 조간대의 평균 입도는 $6.74{\sim}8.52{\phi}$로 세립질 실트~점토의 범주이며, 분급도는 불량~매우불량으로 나타났다. 퇴적물의 강열감량은 이서천의 영향을 강하게 받는 지점에서 높게 나났으며, 퇴적물 COD는 건강한 퇴적물의 상태를 보이고 있다. 퇴적물 인의 형태별 함량은 residual P> NAI-P> apatite P> adsorbed P순으로 나타났으며, 쉽게 수층으로 이동 가능한 이동성 인(Labile-Phosphorus)은 정점 1과 2에서는 다른 지역보다 높게 나타나고 있어 이들 지역의 퇴적물에서 수층으로 쉽게 인이 이동될 수 있는 가능성을 시사하고 있다.

  • PDF

항공사진과 SPOT-5 위성영상을 이용한 낙동강 하구역 울타리섬들의 해안선 변화율 (Shoreline-change Rates of the Barrier Islands in Nakdong River Estuary Using Aerial Photography and SPOT-5 Image)

  • 정상훈;김부근;김백운;이상룡
    • Ocean and Polar Research
    • /
    • 제35권1호
    • /
    • pp.1-14
    • /
    • 2013
  • Shoreline data of the barrier islands in Nakdong River Estuary for the last three decades were assembled using six sets of aerial photographs and seven sets of satellite images. Canny Algorithm was applied to untreated data in order to obtain a wet-dry boundary as a proxy shoreline. Digital Shoreline Analysis System (DSAS 4.0) was used to estimate the rate of shoreline changes in terms of five statistical variables; SCE (Shoreline Change Envelope), NSM (Net Shoreline Movement), EPR(End Point Rate), LRR (Linear Regression Rate), and LMS (Least Median of Squares). The shoreline in Jinwoodo varied differently from one place to another during the last three decades; the west tail has advanced (i.e., seaward or southward), the west part has regressed, the south part has advanced, and the east part has regressed. After the 2000s, the rate of shoreline changes (-2.5~6.7 m/yr) increased and the east advanced. The shoreline in Shinjado shows a counterclockwise movement; the west part has advanced, but the east part has retreated. Since Shinjado was built in its present form, the west part became stable, but the east part has regressed faster. The rate of shoreline changes (-16.0~12.0 m/yr) in Shinjado is greater than that of Jinwoodo. The shoreline in Doyodeung has advanced at a rate of 31.5 m/yr. Since Doyodeung was built in its present form, the south part has regressed at the rate of -18.2 m/yr, but the east and west parts have advanced at the rate of 13.5~14.3 m/yr. Based on Digital Shoreline Analysis, shoreline changes in the barrier islands in the Nakdong River Estuary have varied both temporally and spatially, although the exact reason for the shoreline changes requires more investigation.