• 한국구조물진단유지관리공학회 논문집
• /
• 제1권2호
• /
• pp.107-113
• /
• 1997

Nondesructive test and structural analysis have been conducted to assess the safety of weld defective steel bridges in service. In the nondestructive test, using the radioactive ray and ultrasonic, the defective welding patterns in the steel bridges are identified. A major defective welding pattern is identified as the lack of welding area due to the insufficient welding penetration. By considering the welding defect in the above, structural analysis is conducted to evaluate the influence of welding defect on the safety of steel bridges. The results indicate that, due to the insufficient welding penetration, the stress obtained in the analysis is over the allowable fatigue stress level, and its influence on safety of the bridges is significant.

• 한국전자통신학회논문지
• /
• 제15권1호
• /
• pp.101-106
• /
• 2020

본 연구는 다양한 어셈블리 부품의 용접부 내부결함을 검사하기 위한 초음파 탐상 장비 개발에 관한 것이다. 본 연구에서는 초음파 탐상을 위하여 시스템의 모션제어 S/W, 초음파 송수신기 제어, 결함 판정 기준 설정 등의 계측 S/W 등이 설계되었으며, 양품과 불량품의 비교분석을 하기 위하여 용접결함 불량품 샘플워크 등도 제작되었다. 이와 같은 구성으로 이루어진 시스템을 통하여 어셈블리 부품 용접부의 결함 위치 및 깊이에 대한 자동검사 기능을 수행할 수 있었으며, 종전에 전문가에 의해 이루어졌던 용접부의 내부결함에 대한 판단을 시스템이 수행하도록 하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 춘계학술대회 논문집
• /
• pp.389-390
• /
• 2007

• Journal of Welding and Joining
• /
• 제25권1호
• /
• pp.9-13
• /
• 2007

• 융합신호처리학회논문지
• /
• 제22권4호
• /
• pp.185-192
• /
• 2021

용접 비드의 불량유무를 판단하기 위하여 다양한 방법들이 제안되어왔으며, 최근에는 센서 자료 검사와 영상 자료 검사가 꾸준히 발표되고 있다. 센서 자료 검사는 정확도가 높고, 2차원 기반의 영상 자료 검사는 용접된 비드의 위치를 파악할 수 있다는 장점이 있다. 하지만 센서 자료만으로 분석 할 경우 정확한 위치에 용접이 되었는지 파악하기가 어렵다. 반면 영상 자료 방법은 잡음과 측정오차가 발생하여 정확도가 높지 않다. 본 논문에서는 평균 전압, 평균 전류, 혼합가스인 센서 자료 검사와 영상 검사 방법을 융합함으로써 각 검사 방법들의 단점을 보완하고 장점을 높여서 정확도를 향상시키고 검사 속도를 높일 수 있는 방법과 이를 소프트웨어로 구현하였다. 그리고 그래픽 사용자 인터페이스(graphical user interface; GUI)를 이용하여 분석을 수행하고 검사에 사용된 자료와 검사 결과를 확인할 수 있도록 하여 사용자가 편리하고 직관적으로 분석을 수행하고 결과를 파악할 수 있도록 하고자 한다. 이 때 각 센서 자료의 특성을 이용하여 센서 검사가 수행되고, 모폴로지 축지적 활성화 윤곽선을 적용하여 영상 자료가 검사된다. 실험 결과를 통하여 98%의 정확도를 보였으며, 네 개의 용접 영상과 센서 자료 검사를 모두 수행할 경우 검사 시간은 약 1.9초로서 용접공정에서 실시간 검사기로 사용 가능한 소프트웨어의 성능을 보였다.

• 센서학회지
• /
• 제28권6호
• /
• pp.371-376
• /
• 2019

We have developed an acoustic resonance inspection system to inspect the welding defects in the mechanical parts fabricated using friction stir welding method. The inspection system was consisted of a DAQ board, a microphone sensor, an impact hammer, and controlled by a PC software. The system was developed to collect and analyze the sound signal generated by hitting the sample with an impact hammer to determine whether it is defective. In this study, 100% welded good samples were compared with 95%, 90%, and 85% welded samples, respectively. The variation of the completeness in welding did not affect the visual appearance in the samples. As a result of analyzing the natural frequencies of the good samples, the five natural frequency peaks were identified. In the case of the defective samples, the frequency change was observed. The welding failure detection time was fast enough to be only 0.7 seconds. Employing our welding defect inspection system to the actual industrial field will maximize the efficiency of quality inspection and thus improve the productivity.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2007년도 추계학술대회 논문집
• /
• pp.247-248
• /
• 2007

• 한국압력기기공학회 논문집
• /
• 제6권1호
• /
• pp.78-82
• /
• 2010

The feeder pipe of Main Primary Heat Transfer System in Wolsong Nuclear Power Plant was inspected by the Ultrasonic Phase Array technique in 2010. It is the first time to apply this method to the construction at Nuclear Power Plant in Korea. The time required for UT technique is less than RT method. The UT method doesn't need to evacuate personnel who works nearby inspecting area and doesn't need to wait developing of film. For these reasons, the UT method is the fastest method among the volumetric inspections. As a result of the examination, it became clear that main defect of the feeder pipe is the Lack of fusion in the welded area. Moreover, the rate of defect was reduced gradually as improvement of welder's skill. If welding machine has problem, the defect has tended to same pattern(occurred same position in the welding area) but these defects were founded without specific rules. For these reasons, the creation of defect is dependent on the skill of worker not on the automatic welding machine. This evaluation of defect signal and collecting data would be useful to further examination in ISI.

• 한국생산제조학회지
• /
• 제9권5호
• /
• pp.135-143
• /
• 2000

The vision system is easy to use the exclusive use as a independent computer system but it is not much popularization by reason of expensive and difficult to adapt to the various fields, because it is easy to the existed computer system, the price is cheap and also it can use to the various measurement purpose which user wanted and programed. The measurement method of the vehicle axle casing nut welding part is that measure the value of the welding part to adapt the actual operation program from using the ratio between the actual length of the standard specimen and the length of image, to measure the ratio between the actual product and the camera image. A defect is found by the assembled visual inspection system. The inspection algorithm which estimates the quality of welded product is developed and also, the software program which processes the automatic test function of the inspection system. We make the foundation of the inspection automatic system and we will help to apply other welding machine.

• 한국생산제조학회지
• /
• 제8권3호
• /
• pp.92-99
• /
• 1999

The inspection unit which is developed and used in this study, is processed the shape data from the CCD camera to seek welding bite section shape, and then calculated as a real dimension from measuring the value of each inspection item. The reason of measuring with the real in this study is came out from the image method which used for a long time, which is extricated the characteristic as the dimension of pixel by recognize pixel. The measurement method of the section shape is that we decide the thresholding value after we drew the histogram to binarizate the object. After that, we make flat the object to get rid of the noise and measure the shape of welded part through the boundarization of the object. The shape measurement is that measure the value of the welding part to adapt the actual operation program from using the ratio between the actual dimension of the standard specimen and the dimension of image, to measure the ratio between the actual product and the camera image. The inspection algorithm which estimates the quality of welded product is developed and also, the software GUI(Graphic User Interface) which processes the automatic test function of the inspection system is developed. We make the foundation of the inspection automatic system and we will help to apply other welding machine.