• International Journal of Korean Welding Society
• /
• 제3권2호
• /
• pp.53-59
• /
• 2003

Visual inspection using laser vision sensor was proposed for fast and economic inspection and was verified experimentally. Welding is one of the most important manufacturing processes for automotive and electronics industries as well as heavy industries. The weld zone influences the reliability of the products. There are two kinds of weld inspection tests, destructive and non­destructive test. Even though the destructive test is much more reliable, the product should be destroyed, and hence the non­destructive test such as ultrasonic or X­ray test was used to overcome this problem. However, these tests are not used for real time inspection.

• 한국공작기계학회논문집
• /
• 제15권2호
• /
• pp.87-92
• /
• 2006

This paper supplements shortcoming of radioactivity check by detecting defect of SWP weld zone using ultrasonic wave. Manufacture 2 stage robot detection systems that can follow weld bead of SWP by method to detect weld defects of SWP that shape of weld bead is complex for this as quantitative. Also, through signal processing ultrasonic wave defect signal system of GUI environment that can grasp easily existence availability of defect because do videotex compose. Ultrasonic wave signal of weld defects develops artificial intelligence style sightseeing system to enhance pattern recognition of weld defects and the classification rate using neural net. Classification of weld defects that do fan Planar defect and that do volume defect of by classify.

• 한국구조물진단유지관리공학회 논문집
• /
• 제2권1호
• /
• pp.98-107
• /
• 1998

There are many weld defects such as surface crack, lack of fusion, and imcomplete penetration in the butt joint of the existing steel bridges. The crack-like defects may significantly reduce the fatigue life of the structure. This paper presents the procedure and the results of the fatigue assessment of the butt joints with weld defect in the existing steel girder bridge. The butt joints with imcomple penetration were instrumented with strain gages to determine the stress histogram under normal traffic. Based on the measured stress histogram the crack propagation analyses were performed for the fatigue assesment. By using the suggested procedure and methodology, one can decide the time of periodic inspection and the necessity of repair of the butt joints with serious weld defects in the existing steel bridge.

• 비파괴검사학회지
• /
• 제9권2호
• /
• pp.42-49
• /
• 1989

It has not been performed to inspect the underclad cracking in Korea nuclear plant since there is no Code Requirements for inspection. However, underclad cracks in nuclear pressure vessels were reported firstly in 1970. The objection of this study is to be established the ultrasonic inspection techniques for underclad cracking. The ultrasonic inspection of bimetalic stainless steel weld is very difficult by high attenuation and multiple scattering at weld surface and weld/base metal interface. The various inspection methods using $70^{\circ}$ refracted longitudinal wave, 50/70 tandem transducer, $45^{\circ}\;and\;60^{\circ}$ single shear wave are compared. Experiments on limited specimens applied same condition to nuclear pressure vessels shows that $70^{\circ}$ refracted longitudinal wave method is the best one for the detection of underclad cracks. 50/70 tandem transducer using SPOT(Satellite Pulse Observation Technique) is more effective for underclad crack sizing than other sizing methods.

• 한국강구조학회 논문집
• /
• 제11권1호통권38호
• /
• pp.1-11
• /
• 1999

본 논문에서는 강구조물의 제작 및 시공에서 용접이음부의 고품질을 확보하기 위하여 강구조물 용접이음부 외부결함의 자동검출에 관한 화상처리 알고리즘을 개발한다. 개발 알고리즘은 광학계의 적절한 배치에 의해 얻어지는 4매의 입력화상을 이용하여 기존의 기법에서 검출할 수 없었던 용접이음부 외부결함을 검출할 수 있음을 보인다. 용접 외부결함이 존재하는 시험편을 제작하고 실험을 통하여 개발 알고리즘의 유용성을 확인하였다. 또한 검출된 용접외부결함의 분류 결과를 육안검사 결과와 비교하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제8권4호
• /
• pp.123-133
• /
• 2004

레일 용접부에 존재하는 각종 결함을 검출하고 이에 대해 정량적으로 평가하는 것은 구조물 전체의 건전성 및 안정성 측면에서 대단히 중요하다. 현재 용접부 내부 결함 검색을 위하여 널리 사용되고 있는 초음파 검사법은 국내 및 국외의 경우 아직 레일에 대한 뚜렷한 평가기준이 제시되어 있지 않은 상태이다. 따라서 현장에서는 탐상기를 보유하고 있어도 이를 정확하게 사용하지 못하고 탐상 결과에 대해서도 합부를 판단하지 못하는 실무자들이 대부분이다. 이에 본고에서는 실무에 있어 현장 기술자들이 알아야 할 레일 용접부의 초음파 탐상에 대하여 첫째, 현재 발주처별 적용하고 있는 국내 궤도 공사 시방서의 문제점 및 개선방향 둘째, 철도 레일 용접부의 초음파 탐상 시험의 적용 방법에 대하여 논하고자 한다.

• 비파괴검사학회지
• /
• 제20권6호
• /
• pp.562-567
• /
• 2000

발전 및 산업설비에 사용되는 많은 압력용기는 저합금강을 사용하여 제작되고 있다. 압력용기의 내면은 부식이 미치는 영향을 최소화하기 위하여 오스테나이트계 스테인리스강으로 덧살용접을 하고 있으나, 용접층간의 계면에서 발생하고 있는 박리균열은 압력용기의 신뢰성에 중요한 변수가 되고 있다. 본 연구에서는 DSP를 사용하여 오버레이 용접부를 고속으로 검사할 수 있는 C-scan 시스템을 개발하였다. 본 시스템은 신호 처리부 (오실로스코프, 펄서/리시버, 디지타이저, DSP), 스캐너, 프로그램 및 위치 제어부로 구성되어 있다. 개발된 시스템을 사용하여 실제 오버레이 용접부에 대한 초음파검사를 실시한 결과 고속으로 신뢰성 높은 검사결과를 얻을 수 있었다.

• 시스템엔지니어링학술지
• /
• 제12권1호
• /
• pp.25-40
• /
• 2016

The Systems Engineering (SE) approach is characterized by the application of a structured engineering methodology for the design of a complex system or component. In this study, the SE methodology is used to design a nondestructive inspection system for Bottom Mounted Instrumentation (BMI) nozzles. We developed a system that enables nondestructive inspection of BMI nozzles during regular refueling outage without removing the reactor internals. A special ultrasonic (UT) probe is introduced to scan and detect cracks within the weld region of the nozzle. A 3D model of the inspection structure system was developed along with the reactor pressure vessel (RPV) and internals which permits a virtual 3D simulation of the operation to check the design concept and effectiveness of the system and to provide a good visualization of the system. This approach allows for a virtual walk through to verify the proposed BMI nozzle inspection system.

• 한국정밀공학회지
• /
• 제32권7호
• /
• pp.619-625
• /
• 2015

There is a large interest to find reliable and automatic methods for crack detection and quantification in the railway bogie frame. The non-destructive inspection of railway bogie frame has been performed by ultrasonic and magnetic particle testing in general inspection. The magnetic particle method has been utilized in the defect inspection of the bogie frame but the grinding process is required before inspection and the dust is developed resulting from the processing. The objective of this paper is to apply the inspection method of bogie frame using infra-red thermography. The infra-red thermography system using the excitation of eddy current was performed for the defect evaluation of weld specimen inserted artificial defects. The result shows that the infra-red thermography method can detect the surface and inner defects in weld specimen for bogie frame.

• 한국생산제조학회지
• /
• 제21권6호
• /
• pp.915-919
• /
• 2012

In constructing all kinds of equipment and steel structure, parts with discontinuities such as weld defects formed in the welded structure can generate fatigue cracks that results in damage or accidents. In this study, weld zones are investigated with X-rays and the latent images are put on film. Weld zone defects can be verified by developing the film. As weld defects are investigated by radiographic testing and correlated with the welding condition, more appropriate welding conditions can be found. According to the result of X-ray radiographic inspection of butt welding ATOS 80 high-strength steel with a thickness of 12mm, the best conditions for welding without creating weld defects are 4 weld-passes, a protective gas of 20% $CO_2$ and 80% Ar, a protective gas flow of 20L/min, a welding current of 200A, an arc voltage of 24V, a welding speed of 14.4cm/min, a welding rod angle of $50^{\circ}$, a welding gap of 5 mm with a ceramic base, and sand pre-heating to $160^{\circ}$ Celsius prior to welding.