• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.4
• /
• pp.89-96
• /
• 2009

In this paper, we propose an efficient deinterlacing algorithm which is an edge dependent interpolation based on edge direction refinement. The conventional edge dependent interpolation algorithms have a visually better performance than any other Intra-field deinterlacing algorithms. However they are very sensitive to noise due to the failure of estimating edge direction. In order to exactly detect edge direction, our method detects edge direction of around interpolated pixel and refines the edge direction using weighted median filter. Simulation results have shown the efficacy of the proposed method with significant improvement over the previous methods in terms of the objective PSNR quality as well as the subjective image quality.

• Wind and Structures
• /
• v.4 no.1
• /
• pp.31-44
• /
• 2001

Mean concentrations of ammonia gas released as a tracer from an isolated low-rise building have been measured and predicted. Predictions were calculated using computational fluid dynamics (CFD) and two dispersion models: a diffusion model and a Lagrangian particle tracking technique. Explicit account was taken of the natural variation of wind direction by a technique based on the weighted summation of individual steady state wind direction results according to the probability density function of the wind direction. The results indicated that at distances >3 building heights downstream the weighted predictions from either model are satisfactory but that in the near wake the diffusion model is less successful. Weighted solutions give significantly improved predictions over unweighted results. Lack of plume spread is identified as the main cause of inaccuracies in predictions and this is linked to inadequate resolution of flow features and mixing in the CFD model. Further work on non-steady state simulation of wake flows for dispersion studies is recommended.

• Journal of Broadcast Engineering
• /
• v.16 no.5
• /
• pp.873-882
• /
• 2011

In this paper, we propose an efficient deinterlacing algorithm which interpolates the missing scan lines by weighted summing of the intra and the inter interpolation pixels according to the spatio-temporal variation. In the spatial interpolation, we adopt a new edge based spatial interpolation method which includes edge directional refinement. The conventional edge dependent interpolation algorithms are very sensitive to noise due to the failure of estimating edge direction. In order to exactly detect edge direction, our method first finds the edge directions around the pixel to be interpolated and then refines edge direction of the pixel using weighted maximun frequent filter. Futhermore, we improve the accuracy of motion detection by reducing the possibility of motion detection error using 3 tab median filter. In the final interpolation step, we adopt weighted sum of intra and inter interpolation pixels according to spatio-temporal variation ratio, thereby improving the quality in slow moving area. Simulation results show the efficacy of the proposed method with significant improvement over the previous methods in terms of the objective PSNR quality as well as the subjective image quality.

• The KIPS Transactions:PartD
• /
• v.15D no.3
• /
• pp.399-410
• /
• 2008

This paper suggests a new retrieval method using weighted vector sum to resolve a problem of traditional location-based retrieval method, nearest neighbor (NN) query, and NN query using direction. The proposed method filters out data with the radius, and then the remained retrieval area is filtered by a direction information compounded of a user's moving direction, a pre-fixed interesting direction, and a pre-fixed retrieval angle. The moving direction is computed from a vector or a weighted vector sum of several vectors using a weight to adopt several cases. The retrieval angle can be set from traditional $360^{\circ}$ to any degree you want. The retrieval data for this method can be a still and moving image recorded shooting location, and also several type of media like text, web, picture offering to customer with location of company or resort. The suggested method guarantees more accurate retrieval than traditional location-based retrieval methods because that the method selects data within the radius and then removes data of useless areas like passed areas or an area of different direction. Moreover, this method is more flexible and includes the direction based NN.

• Korean Journal of Computational Design and Engineering
• /
• v.21 no.2
• /
• pp.151-158
• /
• 2016

It is important to analyze dimensional errors occurring during shipbuilding process. A ship is constructed by assembling blocks and installing outfits in assembled ship structure. Blocks and outfits have a main direction that has greater importance than other directions from the view point of dimensional error. Therefore, a main direction should have a greater weighting factor than other directions in order to achieve meaningful inspection results. In this paper, a modified point registration method based on iterative closest point (ICP) is proposed. In this method, a user determines one or two main directions among x, y, and z directions, and then each main direction is made to have a greater weighting factor than other directions. For points registration, mapping between measured points and design points are performed by the modified ICP in which weighting factor assigned to each main direction is considered.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.9C
• /
• pp.704-711
• /
• 2008

This paper proposes a new de-interlacing method which results in efficient visual improvement. In the proposed algorithm, the distance weight was considered and the previously developed the EDI (Edge Dependent Interpolation) algorithm and the NAL (New Adaptive Linear interpolation) algorithm were used as a basis. The do-interlacing method was divided into two main parts. First, the edge direction was found by using information of closer pixels. Then, missing pixels were interpolated along with the decided edge direction. In this paper, after predicting the edge through the EDI algorithm, missing pixels were interpolated by using the weighted distance based on the NAL algorithm. Experimental results indicate that the proposed algorithm be superior to the conventional algorithms in terms of the objective and subjective criteria.

• Proceedings of the KIEE Conference
• /
• 2005.05a
• /
• pp.179-181
• /
• 2005

There is asymmetric in horizontal and vertical side of PDP cell. Every vertical line has BM(Black Mask) to improve luminance contrast. When error diffusion is processed in PDP system, these problems make an error bigger. In 4 inch PDP system, every red, green, blue color of test pattern is presented and each luminance is measured. That is called horizontal(H), diagonal right(R), diagonal left(L) and vertical(V). In red channel, high luminance descending order is V-H-R-L. In green channel, V-H-L-R. In blue channel, V-M-R=L. After average luminance of each direction is calculated. new weighted error diffusion(Weighted ED) is proposed. In digital image signal processing, the error in weighted ED is differ from ED's. The image of weighted ED is more less error compare to conventional ED and close to original image. As the gray level linearity and big size panel is adopted, weighted ED could produce good image.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.4 no.1
• /
• pp.45-61
• /
• 2010

In the communication channel, the received signal is affected by many factors that can cause errors. These effects mean that received signal strength (RSS) based methods incur more errors in measuring distance and consequently result in low precision in the location detection process. As one of the approaches to overcome these problems, we propose using direction calibration to improve the performance of the RSS-based method for distance measurement, and sequentially a weighted least squares (WLS) method using reliability factors in conjunction with a conventional RSS weighting matrix is proposed to solve an over-determined localization process. The proposed scheme focuses on the features of the RSS method to improve the performance, and these effects are proved by the simulation results.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.11C
• /
• pp.940-947
• /
• 2010

Motion Compensated Frame Interpolation(MCFI) has been used to reduce motion jerkiness for dynamic scenes and motion blurriness for LCD-panel display as post processing for high quality display. However, MCFI that directly uses the motion information often suffers from annoying artifacts such as blockiness, ghost effects, and deformed structures. So in this paper, we propose a novel edge-based adaptively weighted vector median filter as post-processing. At first, the proposed method generates an edge direction map through a sobel mask and a weighted maximum frequent filter. And then, outlier MVs are removed by average of angle difference and replaced by a median MV of $3{\times}3$ window. Finally, weighted vector median filter adjusts the weighting values based on edge direction derived from spatial coherence between the edge direction continuity and motion vector. The results show that the performance of PSNR and SSIM are higher up to 0.5 ~ 1 dB and 0.4 ~ 0.8 %, respectively.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.18 no.1
• /
• pp.84-92
• /
• 2015

This paper proposes a new approach to reduce the target estimation error of the measurement angle, especially applied to the medium and long range surveillance radar. If the target has no maneuver and no change in heading direction for a certain time interval, the predicted angle of interacting multiple model(IMM) from the previous track information can be used to reduce the angle estimation error. The proposed method is simulated in 2 scenarios, a scenario with a non-maneuvering target and a scenario with a maneuvering target. The result shows that the new fusion solution(weighted IMM) with the predicted azimuth and the measured azimuth is worked properly in the two scenarios.