• 제목/요약/키워드: Weighted Support

검색결과 202건 처리시간 0.028초

알루미늄 샌드위치 패널의 구조적 형상 및 진동 특성에 관한 연구 (A Study on the Structural Shape and Vibrational Characteristics of Aluminum Sandwich Panel)

  • 배동명;손정대
    • 수산해양기술연구
    • /
    • 제40권4호
    • /
    • pp.351-359
    • /
    • 2004
  • 본 연구에서는 실선에 적용된 알루미늄 하니콤 샌드위치 판 (AHSP)을 저자가 제안한 심재의 형상이 피라미드인 알루미늄 샌드위치 판의 구조적 특성 및 진동특성을 검토해 보았다. 알루미늄 피라미드 샌드위치 판(APSP)의 기초 자료로 쓰일 수 있게 심재의 각도변화, 높이변화 및 면재와 심재의 두께변화에 따른 구조적 특성을 검토한 결과 APSP가 강도 및 강성에서 우수함을 보였으며, 질량대비 큰 강성 때문에 고유진동수도 다소 크게 평가되었다.

복잡한 도시장면의 고속 렌더링을 위한 기여도 컬링 기법 (A Contribution Culling Method for Fast Rendering of Complex Urban Scenes)

  • 이범종;박종승
    • 한국게임학회 논문지
    • /
    • 제7권1호
    • /
    • pp.43-52
    • /
    • 2007
  • 본 논문은 복잡하고 거대한 도시장면의 빠른 렌더링을 위한 기여도 컬링에 대한 새로운 방법을 제안한다. 시각 절두체 컬링 기술은 복잡한 장면의 빠른 렌더링에 사용된다. LOD를 지원하기 위해 영상 영역을 분할하고 가중치 쿼드트리를 생성한다. 현재 카메라 위치에서 보이는 객체들만 현재 쿼드트리의 요소가 되고 가중치는 쿼드트리의 각 객체에 할당된다. 가중치는 투사된 객체의 영상 영역에 비례하기 때문에 카메라로부터 먼 거리에 있는 큰 구조물들은 가까운 거리에 있는 작은 구조물들보다 컬링될 확률이 적다. 렌더링 시간은 보이는 객체들의 수에 독립적으로 거의 일정하다. 제안된 방법을 현재 개발 중인 새로운 대도시 구역에 적용했다. 제안된 방법은 기존의 방법과 같은 렌더링 질을 보장하며 다각형의 수를 약 9% 감소시킴을 확인하였다. 제안된 렌더링 방법은 복잡하고 거대한 장면의 고품질 실간 렌더링을 위한 응용 시스템에 효과적으로 사용될 수 있음을 확인하였다.

  • PDF

Prediction of concrete compressive strength using non-destructive test results

  • Erdal, Hamit;Erdal, Mursel;Simsek, Osman;Erdal, Halil Ibrahim
    • Computers and Concrete
    • /
    • 제21권4호
    • /
    • pp.407-417
    • /
    • 2018
  • Concrete which is a composite material is one of the most important construction materials. Compressive strength is a commonly used parameter for the assessment of concrete quality. Accurate prediction of concrete compressive strength is an important issue. In this study, we utilized an experimental procedure for the assessment of concrete quality. Firstly, the concrete mix was prepared according to C 20 type concrete, and slump of fresh concrete was about 20 cm. After the placement of fresh concrete to formworks, compaction was achieved using a vibrating screed. After 28 day period, a total of 100 core samples having 75 mm diameter were extracted. On the core samples pulse velocity determination tests and compressive strength tests were performed. Besides, Windsor probe penetration tests and Schmidt hammer tests were also performed. After setting up the data set, twelve artificial intelligence (AI) models compared for predicting the concrete compressive strength. These models can be divided into three categories (i) Functions (i.e., Linear Regression, Simple Linear Regression, Multilayer Perceptron, Support Vector Regression), (ii) Lazy-Learning Algorithms (i.e., IBk Linear NN Search, KStar, Locally Weighted Learning) (iii) Tree-Based Learning Algorithms (i.e., Decision Stump, Model Trees Regression, Random Forest, Random Tree, Reduced Error Pruning Tree). Four evaluation processes, four validation implements (i.e., 10-fold cross validation, 5-fold cross validation, 10% split sample validation & 20% split sample validation) are used to examine the performance of predictive models. This study shows that machine learning regression techniques are promising tools for predicting compressive strength of concrete.

주택바우처 수혜자의 주거지 특성 분석 - 서울시를 중심으로 (A Study on The Characteristics of Residential Area of Housing Voucher Program - in the Case of the Seoul Metropolitan Area)

  • 김가연;홍희정;홍성현
    • 한국콘텐츠학회논문지
    • /
    • 제16권7호
    • /
    • pp.207-220
    • /
    • 2016
  • 서민층의 주거지원 정책이 기존의 사업자 중심의 대규모 공공임대주택 공급에서 수요자 중심의 주택바우처 제도로 전환되고 있다. 한국의 주택바우처는 2010년부터 서울에서 운영하고 있으며 2014년에는 전국적으로 확대 실시하였다. 이러한 관심에 따라 주택바우처에 대한 다양한 이론적 논의가 많으나 실증 자료를 기반으로 한 연구는 부족한 편이다. 따라서 이 연구는 서울시 주택바우처 수혜자의 주거지 선택요인을 찾아내고, 일반 회귀분석(OLS)과 지리적 가중회귀(GWR) 분석을 실시하여 의미 있는 결과를 도출하고자 하였다. 분석결과, 서울시 주택바우처 수혜자들이 우선적으로 고려하는 요인으로 단순노무직 일자리와 사회복지시설 접근성, 대중교통 접근성이 영향을 미치는 것으로 나타났다. 이는 기존 연구와 다른 결과로써 다음과 같은 점이 고려되어야 할 것이다. 첫째, 한국형 주택바우처에 대한 목적의 재정립이 필요하다. 둘째, 단순한 주거지원 뿐만 아니라 재취업을 위한 교육과 가족들을 지원할 수 있는 사회복지 서비스와의 연계가 필요하다.

QoS 기반의 EPON 시스템에서 효율적인 차등 대역폭 할당 (Efficient Differentiated Bandwidth Allocation for QoS based Ethernet PON System)

  • 엄종훈;정민석;김승호
    • 한국정보과학회논문지:정보통신
    • /
    • 제32권2호
    • /
    • pp.156-166
    • /
    • 2005
  • EPON(Ethernet Passive Optical Network)은 최근 활발하게 연구되고 있는 경제적이고 효율적인 가입자 접속망이다. 차세대 접속망인 EPON의 MAC(Media Access Control) 프로토콜은 TDMA(Time Division Multiple Access)방식을 기본으로 QoS(Quality of Service)를 보장하기 위한 다양한 대역폭 할당 방식이 제안되고 있다. 기존에 제안된 방식은 고순위(high priority) 트래픽에 대한 요구 대역폭에 일정한 비율의 대역폭을 추가하여 대역폭을 할당함에 따라 전체 싸이클 시간이 증가하여 패킷 지연 시간이 길어지는 문제점이 있다. 본 논문에서는 QoS 기반의 EPON에서 차등 서비스(differentiated service)를 지원하는 동적 대역폭 할당을 위하여 기존에 제안된 방식의 문제점을 해결하는 효율적인 차등 대역폭할당 방식 DBGA(Differentiated Bandwidth Gurrantee Allocation)을 제안한다. DBGA는 효율적으로 공평하게 사용자에게 대역폭을 할당하고 고순위(high priority) 트래픽에 대하여 평균 및 최대 패킷 지연에서 우수한 성능을 보여준다. 제안된 방식의 성능을 분석하고 효율성을 검증하기 의하여 OPNET을 이용하여 EPON을 모델링하고 시뮬레이션을 한다.

경기북부지역 정밀 수치기후도 제작 및 활용 - I. 수치기후도 제작 (Development and Use of Digital Climate Models in Northern Gyunggi Province - I. Derivation of DCMs from Historical Climate Data and Local Land Surface Features)

  • 김성기;박중수;이은섭;장정희;정유란;윤진일
    • 한국농림기상학회지
    • /
    • 제6권1호
    • /
    • pp.49-60
    • /
    • 2004
  • Northern Gyeonggi Province(NGP), consisting of 3 counties, is the northernmost region in South Korea adjacent to the de-militarized zone with North Korea. To supplement insufficient spatial coverage of official climate data and climate atlases based on those data, high-resolution digital climate models(DCM) were prepared to support weather- related activities of residents in NGP Monthly climate data from 51 synoptic stations across both North and South Korea were collected for 1981-2000. A digital elevation model(DEM) for this region with 30m cell spacing was used with the climate data for spatially interpolating daily maximum and minimum temperatures, solar irradiance, and precipitation based on relevant topoclimatological models. For daily minimum temperature, a spatial interpolation scheme accommodating the potential influences of cold air accumulation and the temperature inversion was used. For daily maximum temperature estimation, a spatial interpolation model loaded with the overheating index was used. Daily solar irradiances over sloping surfaces were estimated from nearby synoptic station data weighted by potential relative radiation, which is the hourly sum of relative solar intensity. Precipitation was assumed to increase with the difference between virtual terrain elevation and the DEM multiplied by an observed rate. Validations were carried out by installing an observation network specifically for making comparisons with the spatially estimated temperature pattern. Freezing risk in January was estimated for major fruit tree species based on the DCMs under the recurrence intervals of 10, 30, and 100 years, respectively. Frost risks at bud-burst and blossom of tree flowers were also estimated for the same resolution as the DCMs.

Cone beam CT와 일반 CT의 흡수선량 및 유효선량 비교평가 (Comparison of cone beam CT and conventional CT in absorbed and effective dose)

  • 김상연;한진우;박인우
    • Imaging Science in Dentistry
    • /
    • 제38권1호
    • /
    • pp.7-15
    • /
    • 2008
  • Purpose: This study provides comparative measurements of absorbed and effective doses for newly developed cone beam computed tomography (CT) in comparison with these doses for conventional CT. Materials and Methods: Thermoluminescent dosimeter rods (TLD rod: GR-200, Thermo Fisher Scientific Inc., Waltham, MA, USA) were placed at 25 sites throughout the layers of Male ART Head and Neck Phantom (Radiology Support Devices Inc., Long Beach, USA) for dosimetry. Implagraphy, DCT Pro (Vatech Co., Hwasung, Korea) units, SCT-6800TXL (Shimadzu Corp., Kyoto, Japan), and Crane x 3+(Soredex Orion Corp., Helsinki, Finland) were used for radiation exposures. Absorption doses were measured with Harshaw 3500TLD reader (Thermo Fisher Scientific Inc., Waltham, MA, USA). Radiation weighted doses and effective doses were measured and calculated by 2005 ICRP tissue weighting factors. Results: Absorbed doses in Rt. submandibular gland were 110.57 mGy for SCT 6800TXL (Implant), 24.56 mGy for SCT 6800TXL (3D), 22.39 mGy for Implagraphy 3, 7.19 mGy for DCT Pro, 5.96 mGy for Implagraphy 1, 0.70 mGy for Cranex 3+. Effective doses $(E_{2005draft)$ were 2.551 mSv for SCT 6800TXL (Implant), 1.272 mSv for SCT 6800TXL (3D), 0.598 mSv for Implagraphy 3, 0.428 mSv for DCT Pro and 0.146 mSv for Implagraphy 1. These are 108.6, 54.1, 25.5, 18.2 and 6.2 times greater than panoramic examination (Cranex 3+) doses (0.023mSv). Conclusion: Cone beam CT machines recently developed in Korea, showed lower effective doses than conventional CT. Cone beam CT provides a lower dose and cost alternative to conventional CT, promising to revolutionize the practice of oral and maxillofacial radiology.

  • PDF

Organ Surface Primo Vessel의 감별특성에 대한 문헌고찰 - 김봉한의 논문을 중심으로 (Publication Review about Discriminative Characteristics of Organ Surface Primo Vessel Based on Kim Bonghan's Paper)

  • 이상훈;장문희;안성훈;손인철;류연희
    • Korean Journal of Acupuncture
    • /
    • 제28권1호
    • /
    • pp.125-137
    • /
    • 2011
  • Objectives : The Primo system is a hypothesis on the new circulation system. It orginates from Bonghan theory. Bonghan theory is about the anatomical substance of acupuncture point and meridian system. It has been regarded as a misunderstanding of the lymphatic system or as a made-up story for the past 40 years. Since 2002, many studies have been published either to support the theory or to refute the old viewpoint. But there are still difficulties about the proper sampling. The purpose of this study is to find out the discriminative criteria of Organ Surface Primo sytem by reviewing the Kim Bonghan's publications. Methods : Abstract of description about the Organ Surface Primo system in 5 publications of Kim Bonghan are weighted by the reverse order of publication. Results and Conclusions : 6 characters of anatomical structure and 11 characters of histological structure are founded as repeated descriptions. We hope that this summarized characteristics would be a good guide to Primo system experiments.

차등서비스 구조에서 버퍼관리기법을 이용한 공평성 제공 (Providing Fairness in Diffserv Architecture using Buffer Management Method)

  • 김중규
    • 한국산업정보학회:학술대회논문집
    • /
    • 한국산업정보학회 2003년도 춘계학술대회
    • /
    • pp.8-13
    • /
    • 2003
  • 최근 인터넷에서는 인터넷 방송, 영상회의, VoIP 등 서비스 품질 보장을 요구하는 새로운 멀티미디어 서비스들의 출현으로 서비스 품질(QoS) 제공이 주요한 과제 가운데 하나다. 이를 위해 차등서비스 구조(DiffServ)가 제시되었는데, 이 구조는 트래픽을 흐름들의 집합을 단위로 서비스를 차별하고, 이를 위해 AF, EF, BE 등 다양한 트래픽 클래스와 이들 사이의 서비스 우선순위를 정의되고 있다. 그러나 AF PHB 메카니즘은 AF out-profile 패킷과 BE 패킷 사이에 초과 자원을 어떻게 공유할 지에 대한 규격이 정해져 있지 않다 따라서 BE 패킷에 대해 좀 더 좋은 서비스를 제공하기 위해 이 두 클래스 패킷 사이에 공평한 공유 메카니즘이 적용되는 것이 필요하다. 본 연구에서는 차등 서비스 영역 내에서 동적 스케줄링과 버퍼관리기법을 이용하여 코어 라우터에서 AF out-profile 패킷으로부터 BE 트래픽을 보호하기 위한 수정된 가중치 라운드 로빈 방식과 동적 버퍼관리기법을 제안하고, 성능을 평가하기 위해 시뮬레이션을 수행한다 시뮬레이션 결과, 제안한 방법은 AF out-profile 패킷으로부터 BE 패킷을 잘 보호할 뿐만 아니라 혼잡상태에서 AF in-profile 패킷도 잘 보호하는 것을 알 수 있었다.

  • PDF

YCbCr 컬러공간에서 구성성분간의 상관관계를 이용한 축소된 채도 정보의 다중 모드 재구성 (Multi-Mode Reconstruction of Subsampled Chrominance Information using Inter-Component Correlation in YCbCr Colorspace)

  • 김영주
    • 한국콘텐츠학회논문지
    • /
    • 제8권2호
    • /
    • pp.74-82
    • /
    • 2008
  • 본 논문은 압축된 영상의 복원 과정에서 축소된 채도 정보를 휘도와 채도 성분의 상관관계를 이용하여 효율적으로 재구성하는 기법들에 대해 살펴보고, 기존에 계산 복잡도 측면에서 효율성을 보인 적응적 가중치를 가진 2차원 선형 보간법에 대해 문제점을 분석하였다. 그리고 본 논문은 2차원 선형 보간법에 대해 영상의 공간 주파수 분포를 고려하지 않는 문제점을 개선하고 저성능 시스템에 적용하기 위해 휘도 성분의 에지 반응도에 따라 계산 복잡도가 서로 다른 재구성 기법을 적용하는 다중 모드 재구성 기법을 제안하였으며, 임베디드 시스템 개발 플랫폼에서의 성능 평가 실험을 통해 유사한 수준의 복원 영상의 품질을 지원하면서 채도 재구성을 위한 계산 시간을 상대적으로 줄이고 있음을 확인하였다.