• 대한안전경영과학회지
• /
• 제3권4호
• /
• pp.135-144
• /
• 2001

The capital cost of the company is one that must be paid to the money owner as the price by using the money. The capital cost according to the source of money supply can be estimated by the expected profit rate undertaken by the use of the capital. But in the area of pre-existent economic evaluation, the evaluation of the company investment has been treated by the profit rate of the capital after considering the repayment conditions of the other's money or the interest. Thus in this study, in case the company makes an investment on various kinds of the capital at the same time, not make use of the capital as a one source, the economic evaluation of an investment should be handled by taking the weighted average cost of capital into consideration in proportion to the constitution of the capital cost by the sources of money supply, Especially, as the cost of the private money is very much connected with the profit rate through the stock market, the Capital Asset Pricing Model (CAPM) will be applied. This kind of economic evaluation method can be said to have much to do with the Economic Value Added : EVA) as well as to be highly thought as a standard to estimate the company' value recently To certify the usefulness of this approach, the case study of the output of the capital cost will be made for the purse of the economic evaluation of the alternative investment by using the financial statements of a motor company H.

• 디지털융복합연구
• /
• 제19권8호
• /
• pp.249-255
• /
• 2021

본 연구는 소프트웨어 시험성적서를 중심으로 국제표준에서 제시하고 있는 8가지 품질특성인 기능성, 신뢰성, 사용성, 유지보수성, 이식성, 효율성, 보안성, 상호운용성에 대한 가중치 결정 문제에 대한 방안을 제시했다. 현재는 소프트웨어 품질 평가에 대한 시험결과는 8가지 품질 특성을 동일한 가중치를 적용해서 산술평균을 구하고 있으나, 소프트웨어 품질 평가 점수는 제품의 특성에 따라 8가지 품질 특성을 구별하여 평가해야 한다는 점을 고려하여 소프트웨어 시험성적서의 결과를 중심으로 텍스트분석을 실시하였다. 텍스트분석을 통해서 나온 결과를 이용해서 8가지 품질 특성별 가중치를 적용하였으며, 두 개의 제품에 대한 시험성적서를 텍스트분석 한 결과를 이용해서 가중치를 적용하여 본 결과 가중치를 적용한 품질특성에 따른 시험성적서의 평균이 더 효율적이라는 것을 확인할 수 있었다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제25권3호
• /
• pp.623-630
• /
• 2001

The conventional control techniques based a mathematical model are not well suited for dealing with ill-defined and uncertain system like a linear quadratic control. Recently, fuzzy control has been successfully applied to a wide variety of practical problems such as robot, water purification, automatic train operation system etc. In this paper, a design technique of robust Fuzzy-LQ controller for each subsystem is designed. Secondly , all the subsystem controllers are combined by fuzzy weighted averaging method. Finally the effectiveness of the proposed controller is verified through a series of computer simulations for an inverted pole system.

• 대한기계학회논문집B
• /
• 제20권11호
• /
• pp.3655-3665
• /
• 1996

An analytical solution is presented for the conduction-dominated solidification of a binary mixture in a semi-infinite medium. The present approach differs from that of other solution by these four characteristics. (1) Solid fraction is determined from the phase diagram, (2) thermophysical properties in mushy zone are weighted according to the local solid fraction, (3) non-equilibrium solidification can be simulated and (4) the cooling condition of under-eutectic temperature can be simulated. Up to now, almost all analyses are based on the assumption of constant properties in mushy zone and solid fraction linearly with temperature or length. The validation for these assumptions, however, shows that serious error is found except some special cases. The influence of microscopic model on the macroscopic temperature profile is very small and can be ignored. But the solid fraction and average solid concentration which directly influence the quality of materials are drastically changed by the microscopic models. An approximate solution using the method of weighted residuals is also introduced and shows good agreement with the analytical solution. All calculations are performed for NH$_{4}$Cl-H$_{2}$O and Al-Cu system.

• 품질경영학회지
• /
• 제32권4호
• /
• pp.169-183
• /
• 2004

The synthetic control chart (SCC) proposed by Wu and Spedding (2000) is to detect shifts in the process mean. The performance was re-evaluated by Davis and Woodall (2002), and the steady-state average run length (ARL) performance was shown to be inferior to cumulative sum (CUSUM) or exponentially weighted moving average (EWMA) chart This paper proposes a simple adaptive scheme to improve the performance of the synthetic control chart. That is, once a non-conforming (NC) sample occurs, we investigate the next L-consecutive samples with larger sample sizes and shorter sampling intervals. We employ a Markov chain model to derive the ARL and the average time to s19na1 (ATS). We also propose a statistical design procedure for determining decision variables. Comprehensive comparative study shows that the proposed control chart is uniformly superior to the original SCC or double sampling (DS) Χ chart and comparable to the EWMA chart in ATS performance.

• 한국컴퓨터정보학회논문지
• /
• 제25권10호
• /
• pp.15-22
• /
• 2020

본 연구에서는 가중치 오차 함수를 적용하여, 미세한 콘크리트 균열을 감지하는 U-Net 모델을 만들 수 있도록 개선 방안을 제안한다. 콘크리트 균열은 안전을 위협하는 요소이기 때문에 그 상태를 주기적으로 파악하고 신속하게 초기 대응을 하는 것이 중요하다. 하지만 현재는 점검자가 직접 육안으로 검사하고 평가하는 외관 검사법이 주로 사용되고 있다. 이는 정확성뿐만 아니라 비용과 시간, 안전성 측면에서도 한계점을 가진다. 이에 콘크리트 구조물에 생성되는 미세한 균열을 신속하고 정밀하게 탐지할 수 있도록 딥러닝을 활용한 기술들이 연구되고 있다. 본 연구에서 U-Net을 활용한 균열 탐지를 시도한 결과, 미세한 균열을 탐지하지 못하는 것을 확인하였다. 이에 제시한 가중치 오차 함수를 적용하여 학습한 모델에 대해 성능을 검증한 결과, 정확도(Accuracy) 99% 이상, 조화평균(F1_Score) 89%에서 92%의 신뢰성 높은 수치를 도출해내었고, 미세한 균열을 정확하고 선명하게 탐지한 결과를 통해 학습 개선 방안의 성능을 검증하였다.

• 전자공학회논문지A
• /
• 제28A권1호
• /
• pp.52-59
• /
• 1991

An effective and accurate delay time model is the key problem in the simulation and timing verification of CMOS logic circuits. We propose a semi-analytic CMOW delay time model taking into account the configuration ratio, the input waveform slope and the load capacitance. This model is based on the Schichman Hodges's DC equations and derived on the optimally weighted switching peak current. The parameters necessary for the model calculation are automatically determined from the program. The proposed model is computationally effective and the error is typically within 10% of the SPICEA results. Compared to the table RC model, the accuracy is inproved over two times in average.

• 품질경영학회지
• /
• 제13권1호
• /
• pp.56-64
• /
• 1985

This paper presents a general algorithm of multi-item continuous review models to obtain simultaneous solutions for ordering quantities and reorder points for each item in an inventory, while satisfying constraints on average inventory investment and reordering workload. Two models are formulated'in each model the heuristic method is utilized, and the partial back-logging is considered. In the first model, the objective function is the minimization of total inventory variable cost. In the second model, the objective function is the minimization of total time-weighted shortages, and the ordering, holding, and stockout costs in this model are independent each other. A numerical example is also solved to present application of each model.

• 한국국방경영분석학회지
• /
• 제22권1호
• /
• pp.30-42
• /
• 1996

This study deals with an optimal firecar location and allocation models under uncertain enemy attack at the airforce base. It allocates just one firecar on the runaway and the other firecars on the headquarter of firecar company in usual situation. It is possible for several facilities at the airforce base to be attacked simultaneously by missiles enemy air attacker, other things under uncertain enemy attack. We formulate two stochastic LP location-allocation models to deal with uncertainty. One model is to locate all firecars on one site like present situation. We generate a new firecar location with a weighted average method. We call this model "centralized allocation model". The other model is to distribute firecars on several possible sites. We call this model "distributed allcoation model". Finally, we compare two models with computer experimentations on 8 airforce bases.on 8 airforce bases.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 1997년도 제15회 KOSCO SYMPOSIUM 논문집
• /
• pp.113-122
• /
• 1997

The conditional moment closure formulation considering the molecular and turbulent diffusion is derived. A simplified solution procedure is proposed to reduce the computational burden due to the increased dimensionality of the conditionally averaged variables. A conditionally averaged variable is expressed as a linear weighted average of the two extremes, 'no reaction' and 'equilibrium' states. The modified elliptic-type conditional moment closure formulation is implemented to simulate a two dimensional nonpremixed mixing layer reacting flow. Results show good agreement for the conditional averages of the species concentration in Bilger et al.