• Journal of the Korean Society of Radiology
• /
• v.13 no.4
• /
• pp.605-611
• /
• 2019

The purpose of this study is to manufacture a multi-function device (MFD) which can be applied to various types of weight-bearing view of the lower leg, and to compare the results with the images from the existing weight-bearing platforms (WBPs), thereby suggesting a clinical utilization. The MFD was manufactured, by considering the minimum adjustable heights of the platform for weight-bearing foot/ankle, platform for hindfoot alignment view, and X-ray tube of the X-ray device. A foot/ankle phantom was used to take the images of weight-bearing lateral foot in MFD and WBPs to compare the resolutions of the X-ray images using a quick modulation transfer function (MTF) program. Between both the images taken from the MFD and WBPs, there was no statistically significant difference found in the mean cycles per pixel (C/P) and the lines per image height (LPH) of the 50%-Contrast Spatial Frequency (MTF50), and 10-90% of Maximum Energy Rise Distance (10-90%), where p>0.05. The MFD is suggested for its clinical trial as a useful positioning device that can secure the patient's safety and manifoldly perform various inspections. Also, the recommendation of the positioning device as a policy can activate dedicated manufacturers, while also improving the quality of medical services.

• Tribology and Lubricants
• /
• v.21 no.1
• /
• pp.39-45
• /
• 2005

Investigation of the mass effect on the journal traces in the clearance of engine bearing has been performed for better design of mass distribution of crank system components such as crank pin, piston, con-rod, balance weight, crank throw weight, etc. as well as for better oil reaction behaviors to the applied forces from the cylinder pressures on the bearing. In this preliminary study, crank pin traces in the engine bearing clearance are computed by varying the equivalent magnitude of crank pin mass that includes the masses of crank pin, piston, con-rod. etc.. while most previous studies regarding journal traces in the bearing clearance neglect the inertia effects of crank pin mass. Although the inertia effect of pill mass is negligibly small compared to viscous force by ${\pi}bearing$ theory, it is found that it gives a great amount of influences on the journal traces in full bearing computation $(2\pi\;bearing\;theory)$ under the dynamic loading conditions.

• Physical Therapy Korea
• /
• v.18 no.2
• /
• pp.18-26
• /
• 2011

The purpose of this study was to investigate the effects of a task-oriented approach on weight-bearing distribution and muscular activities of the paretic leg during sit-to-stand movement in 18 chronic stroke patients. Both groups were received neurodevelopmental treatment for 30 min/day and then the experimental group ($n_1$=9) followed additional a task-oriented approach (sit-to stand training with controlled environment) and the control group ($n_2$=9) followed a passive range of motion exercise for 15 min/day, five days/week, for four weeks. Weight-bearing distribution and muscular activities of the paretic leg during sit-to-stand movement were measured before and after four weeks of training. There was significantly improved weight-bearing distribution of the paretic leg during sit-to-stand movement in the experimental group compared with that of the control group after four weeks of training (p<.05). But electromyographic activities of the quadriceps and the tibialis anterior of the paretic leg were not significantly different (p>.05). Thus, it is necessary to apply a task-oriented approach to improve the weight-bearing distribution of the paretic leg during sit-to-stand movement in chronic stroke patients.

• International Journal of Contents
• /
• v.9 no.1
• /
• pp.65-70
• /
• 2013

The purpose in the present study was to examine the effects of weight-bearing exercises on stroke patients' ability to perform upper extremity activities. Experiments were conducted with 24 female stroke patients who were randomly assigned to either a control group (CG) that performed general exercise or an experimental group that performed weight-bearing exercise (WBG). The experiments were conducted for 30 minutes per time, three times per week for six weeks. The upper extremity functions, grasping power, and the ability to manipulate the fingers were measured for both groups before the experiments and again six weeks after the beginning of the experiments. Although the scores for upper extremity functions relating to raising the arms that correspond to proximal upper extremity functions increased in both groups, the WBG showed more significant improvement. The WBG showed significant changes in grasping power compared to the CG. Based on these results, weight-bearing exercise can be effective in improving the ability to perform upper extremity movements and grasping power and thus can be used in stroke rehabilitation.

• Journal of the Korean GEO-environmental Society
• /
• v.7 no.5
• /
• pp.21-29
• /
• 2006

Light weight filling method prevents settlement of ground by decreasing the weight of fills. This method is increasingly used for it's convenience and workability. Styrofoam is increasingly used as a lightweight filling material in soft ground. The beneficial effects of the use of EPS derive from minimizing the stress increment, increasing the bearing capacity and reducing the settlement. For this study, model test and FEM analysis of bearing capacity is carried out composing two-layered ground with clay in the lower layer and lightweight filling material in upper layer. Based on the results obtained here in this study, it is concluded that the use of recycled EPS beads is acceptable lightweight fill. Light weight fills used for disposal is superior to typical embankment fills in bearing capacity.

• The Journal of Churna Manual Medicine for Spine and Nerves
• /
• v.4 no.1
• /
• pp.19-29
• /
• 2009

Objectives: The purpose of this study is to evaluate the therapeutic effect of acupuncture treatment of acute ankle sprain combined with positional release therapy. Methods: A prospective randomized single blind study between positional release group and knee flexed supine position group was conducted. Patients with ankle sprain within 48 hours were evaluated by Ankle injury grade chart(AIGC). In group A, positional release therapy was combined with acupuncture, whereas in group B, acupuncture was conducted in knee flexed supine position. The treatment was planned for a duration of 1 week, 3times a week. In AIGC scores, VAS, weight bearing time and weight bearing time in blind were followed up and compared. Results and Conclusion: The VAS score decreased in both group. Weight bearing time increased in group B, weight bearing time in blind increased in group A. Comparing the therapeutic effect of each group, group A had significant effectiveness in weight bearing time in blind. So we may conclude that Acupuncture treatment combined with positional release therapy is effective and recommandable at early stage of ankle sprain.

• Tribology and Lubricants
• /
• v.39 no.3
• /
• pp.94-101
• /
• 2023

Automotive wheel bearings are a critical component of vehicles that support their weight and facilitate rotation. Life and stiffness are significant performance characteristics of wheel bearings. Designing wheel bearings involves finding optimal design variables that satisfy both performances. CO₂ emission reduction and fuel efficiency regulations attribute to the recent increase in design requirements for lightweight and compact automotive parts while maintaining performance. However, achieving a design that maintains performance while reducing weight poses challenges, as performance and weight are generally inversely proportional. In this study, we perform design optimization of automotive wheel bearings considering life and stiffness. We develop a program that calculates the basic rated life and modified rated life based on international standards for evaluating the life of wheel bearings. We develop a regression equation using regression analysis to address the time-consuming stiffness analysis during repetitive analysis. We perform ANOVA and main effect analyses to understand the statistical characteristics of the developed regression equation. Furthermore, we verify its reliability by comparing the predicted and test results. We perform design optimization using the developed life prediction program, stiffness regression equation and weight regression equation. We select bearing specifications and geometry as design variables, weight as the cost function, and life and stiffness as constraints. Through design optimization, we investigate the influence of design variables on the cost function and constraints by comparing the initial and optimal design values.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.8
• /
• pp.1585-1590
• /
• 2002

This paper reports on the balance weight effect on the lubrication and friction characteristics of crankshaft system. To determine the main bearing loads, the crankshaft was treated as statically determinate system. Four and eight-balance weight crankshafts were considered, and minimum oil film thickness and friction loss were calculated. The main bearing loads were increased in the four-balance shaft due to the increasing of unbalanced rotating mass at No. 1 and 3 main bearing sides. The minimum oil film thickness of four-balance shaft became thinner than eight-balance, and friction loss was increased.

• Journal of International Academy of Physical Therapy Research
• /
• v.2 no.2
• /
• pp.294-300
• /
• 2011

The purpose of this study was to investigate the influence of the static pelvic inclination and declination in the static standing position on weight bearing rate and gait elements. Fourteen healthy adults in their twenties were participated. Two groups of healthy adults were allocated in this study: above and below the average of pelvic tilt. The correlation between the pelvic inclination, weight bearing rate and gait elements were measured. There was a statistical correlation between the pelvic tilt and step. Also, there was a statistical difference when we compared anterior declination with swing period and posterior declination with step. There was an asymmetric correlation between pelvic tilt and step. However, there was no statistical difference between the groups above and below the average of pelvic tilt. This result indicates that dipper pelvic inclination doesn't affect the asymmetry of step.

• Advances in Traditional Medicine
• /
• v.3 no.2
• /
• pp.72-79
• /
• 2003

The present investigation was undertaken to study whether tumor-associated macrophages of Daltons lymphoma (DL), a spontaneous transplantable T cell lymphoma can be activated to tumoricidal state by alcoholic extract of Tinospora cordifolia (ALTC). In vivo administration of ALTC (200 mg/kg body weight) in DL-bearing mice resulted in an enhanced RNI production and an augmented cytotoxic response of tumor-associated macrophages. Earlier we had reported that DL-bearing mice show a regression of thymus and an enlargement of spleen. In vivo administration of ALTC to DL-bearing hosts resulted in a decrease in the weight of spleen and counts of splenocytes along with an increase in the weight of thymus as compared to control DL-bearing mice. In vivo administration of ALTC in DL-bearing mice also resulted in an increase in the proliferation of splenocytes/thymocytes and BMC. The results of this study indicate that the ALTC upon in vivo administration in DL-bearing shows immuno-modulatory effects and thus may have clinical significance.