• Korean Management Science Review
• /
• v.13 no.2
• /
• pp.205-213
• /
• 1996

This paper develops a simple interactive procedure which can be efficiently used to solve a bicriteria linear programming problem. The procedure exploits the relatively simple structure of the bicriterion linear programming problem. Its application to a transportation problem is also presented. The results demonstrate that the method developed in this paper could be easily applicable to any bicriteria linear program in general.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.10
• /
• pp.911-920
• /
• 2016

For the pitch and yaw axis attitude control of launch vehicle, thrust vector control which changes the direction of thrust during the engine combustion is commonly used. Hydraulic actuation system has been used generally as a drive system for the thrust vector control of launch vehicles with the advantage of power-to-weight ratio. Nowadays, due to the developments of highly efficient electric motor and motor control techniques, it has done a lot of research to adopt electro-mechanical actuator for thrust vector control of small-sized launch vehicles. This paper describes system design and test results of the prototype of direct drive electro-mechanical actuation system which is being developed for the thrust vector control of $3^{rd}$ stage engine of KSVL-II.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.4A
• /
• pp.269-277
• /
• 2012

When there are mismatches between the beamforming steering vector and the array response vector for the desired signal, the performance can be severely degraded as the adaptive array attempts to suppress the desired signal as well as interferences. In this paper, an robust method is proposed for the adaptive array in the presence of both direction errors and random errors in the steering vector. The proposed method first finds a signal-plus-interference subspace (SIS) from the correlation matrix, which in turn is exploited to extract an interference subspace based on the structure of a uniform linear array (ULA), the effect of the desired signal direction vector being reduced as much as possible. Then, the weight vector is attained to be orthogonal to the interference subspace. Simulation shows that the proposed method, in terms of signal-to-interference plus noise ratio (SINR), outperforms existing ones such as the doubly constrained robust Capon beamformer (DCRCB).

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.8
• /
• pp.35-44
• /
• 2014

This paper proposes a 3D pointing interface that is designed for the efficient application of a hand mouse. The proposed method uses depth images to secure high-quality results even in response to changes in lighting and environmental conditions and uses the normal vector of the palm of the hand to perform 3D pointing. First, the hand region is detected and tracked using the existing conventional method; based on the information thus obtained, the region of the palm is predicted and the region of interest is obtained. Once the region of interest has been identified, this region is approximated by the plane equation and the normal vector is extracted. Next, to ensure stable control, interpolation is performed using the extracted normal vector and the intersection point is detected. For stability and efficiency, the dynamic weight using the sigmoid function is applied to the above detected intersection point, and finally, this is converted into the 2D coordinate system. This paper explains the methods of detecting the region of interest and the direction vector and proposes a method of interpolating and applying the dynamic weight in order to stabilize control. Lastly, qualitative and quantitative analyses are performed on the proposed 3D pointing method to verify its ability to deliver stable control.

• The Korean Journal of Physiology and Pharmacology
• /
• v.3 no.6
• /
• pp.597-603
• /
• 1999

Caldesmon (CaD), one of microfilament-associated proteins, plays a key role in microfilament assembly in mitosis. We have investigated the effects of overexpression of the high molecular weight isoform of CaD (h-CaD) on the physiology of vascular smooth muscle cells (VSMCs). Rat aortic VSMCs were stably transfected with plasmids carrying a full length human h-CaD cDNA under control of cytomegalovirus promoter. The majority of the overexpressed h-CaD appears to be localized predominantly on cytoskeleton structures as determined by detergent lysis. The overexpression of h-CaD, however, does not decrease the level of endogenous low molecular weight isoform of CaD. h-CaD overexpressing VSMCs (h-CaD/VSMCs) show a decreased growth rate than that of vector-only transfected cells when determined by $[^3H]thymidine$ uptake and cell counting after fetal bovine serum (FBS) stimulation. h-CaD/VSMCs were smaller than vector-transfected cells by 18% in cell diameter. These data suggest that overexpression of h-CaD can inhibit the poliferation and the cell volume of VSMCs stimulated by growth factors and that the gene therapy with h-CaD may be helpful to prevent the conditions associated with hypertrophy and/or hyperplasia of VSMCs after arterial injuries.

• Journal of Advanced Navigation Technology
• /
• v.5 no.2
• /
• pp.111-122
• /
• 2001

In this paper, we study the performance of eigencanceller which use a eigenvector and eigenvalue in order to update a weighter vector. Eigencanceller can suppress directional interferences and noise effectively while maintaining specified beam pattern constraints. The constraints and optimal weight vector of eigencanceller vary by using interference and noise or desired signal, interference signal and noise as array input signal. From the analysis results in the steady state, We show that weight vectors in each case are simplified the form of projection equation that belongs to desired subspace orthogonal to interference subspace and eigencanceller has the better performance than RLS method through mathematical analysis and simulation.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.4
• /
• pp.147-152
• /
• 2012

This paper estimates the direction of arrival of desired a target using propagation wave in spatial. Direction of arrival estimation is to find desired target position among received signal to receiver array antennas. In this paper, we estimated direction of arrival for target, by using cost function and high resolution MUSIC algorithm, in order to direction of arrival estimation, and calculated optimum weight vector. Through simulation, in regard to the estimation of the arrival direction of a target, the performances of the existing ESPRIT algorithm and the proposed algorithm were comparatively analyzed. In the estimation time of the arrival direction of a target object, the proposed algorithm showed an improvement of approximately as compared to the existing ESPRIT algorithm.

• ETRI Journal
• /
• v.20 no.2
• /
• pp.133-148
• /
• 1998

The objective of this paper is to present an adaptive algorithm for computing the weight vector which provides a beam pattern having its maximum gain along the direction of the mobile target signal source in the presence of interfering signals within a cell. The conjugate gradient method (CGM) is modified in such a way that the suboptimal weight vector is produced with the computational load of O(16N), which has been found to be small enough for the real-time processing of signals in most land mobile communications with the digital signal processor (DSP) off the shelf, where N denotes the number of antenna elements of the array. The adaptive procedure proposed in this paper is applied to code division multiple access (CDMA) mobile communication system to show its excellent performance in terms of signal to interference plus noise ratio (SINR), bit error rate (BER), and capacity, which are enhanced by about 7 dB, ${\frac{1}{100}}$ times, and 7 times, respectively, when the number of antenna elements is 6 and the processing gain is 20 dB.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.8 no.5
• /
• pp.400-404
• /
• 2015

In this paper, we study for direction of arrival MUSIC spatial spectrum algorithm in order to desired signal estimation in spatial. Proposal MUSIC spatial spectrum algorithm in paper use model error and Bayesian method to estimation on correct target position. Receiver array response vector using adaptive array antenna use Bayesian method, and target position estimate to update weight value with model error method. Target's signal estimation of desired direction of arrival in this paper apply weight value of signal covariance matrix for array response vector after removing incident signal interference and noise, respectively. Though simulation, we analyze to compare proposed method with general method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.4A
• /
• pp.399-406
• /
• 2011

Adaptive beamformers, which utilize a priori information on the arrival angle of the desired signal. suppress interferences while maximizing their gains in the desired signal direction. However, if there exist errors in the direction information, they can suffer from severe performance degradation since the desired signal is treated as an interference. A robust adaptive beamforming method is presented which exploits the signal-blocking structure of the Duvall beamformer. The proposed method finds an interference signal space directly from correlations of received signals and then obtains a weight vector such that it is orthogonal to the space. Applying the weight vector to two sub arrays which consist of one less sensors than the original uniform lineal array (ULA), the beamformer efficiently estimates the arrival angle of the desired signal. Its computational complexity is lower than existing methods, which require matrix inversion or eigendecomposition.