• International Journal of Highway Engineering
• /
• v.18 no.6
• /
• pp.35-40
• /
• 2016

OBJECTIVES : The objective of this study is to analyze the nonlinear behavior of block pavements using multi-load level falling weight deflectometer (FWD) deflections. METHODS : Recently, block pavements are employed not only in sidewalks, but also in roadways. For the application of block pavements in roadways, the structural capacities of subbase and subgrade are important factors that support the carry traffic load. Multi-load level FWD testing was conducted on block pavements to analyze their nonlinear behavior. The deflection ratio due to the increase in load was analyzed to estimate the nonlinearity of block pavements. Finite element method with nonlinear soil model was applied to simulate the actual nonlinear behavior of the block pavement under different levels of load. RESULTS : The results of the FWD testing show that the center deflections in block pavements are approximately ten times greater than that in asphalt pavements. The deflection ratios of the block pavement due to the increase in the load range from 1.2 to 1.5, indicating that the deflection increased by 20~50%. The material coefficients of the nonlinear soil model were determined by comparing the measured deflections with the predicted deflections using the finite element method. CONCLUSIONS : In this study, the nonlinear behavior of block pavements was reviewed using multi-load level FWD testing. The deflection ratio proposed in this study can estimate the nonlinearity of block pavements. The use of nonlinear soil model in subbase and subgrade increases the accuracy of predicting deflections in finite element method.

• Animal Bioscience
• /
• v.36 no.7
• /
• pp.1059-1066
• /
• 2023

Objective: Present study was designed to evaluate the efficacy of Acacia nilotica bark extract as an alternative to antibiotic growth promoters in broilers. Methods: Six hundred, day-old broiler chicks were randomly divided into six groups (NC, without any supplementation; AB, NC+Zinc Bacitracin; PB, NC+Safmannan; ANBE1, NC+A. nilotica bark extract 0.1%; ANBE3, NC+A. nilotica bark extract 0.3%; ANBE5, NC+A. nilotica bark extract 0.5%), with ten replicates per group (10 chicks/replicate) and feeding trial was lasted for 35 days. Results: Results showed that weight gain (1,296.63 g) and feed conversion ratio (FCR, 1.59) of AB was better than NC, during the finisher phase. Overall FCR of AB (1.53), PB (1.54), and ANBE5 (1.54) was significantly (p<0.05) better than NC. From carcass parameters relative weight of wing and heart were highest in ANBE3 (2.5% and 1.51%, respectively). Significantly (p<0.05) highest blood glucose level was observed in NC (264.5 mg/dL) and highest albumin concentration was found in AB (1.46 mg/dL). In addition, antibody titer levels against ND and IBD were higher in ANBE5 than NC, while higher relative weight of bursa was observed in ANBE3 than NC. The villus height to crypt depth ratio in all experimental groups was better than NC. Conclusion: Acacia nilotica bark extract could be a suitable alternative to antibiotic growth promoters to support the growth in broilers.

• Journal of the Korea Concrete Institute
• /
• v.27 no.4
• /
• pp.419-426
• /
• 2015

The purpose of this study is to investigate experimentally the optimum mix design and site application case of soil mixing wall (SMW) method which is cost-effective technique for construction of walls for cutoff wall and excavation support as well as for ground improvement before constructing LNG storage tank typed under-ground. Considering native soil condition in site, main materials are selected ordinary portland cement, bentonite as a binder slurry and also it is applied $1,833kg/m^3$ as an unit volume weight of native soil, Variations for soil mixing wall are as followings ; (1) water-cement ratio 4cases (2) mixing velocity (rpm) 3levels (3) bleeding capacity and ratio, compressive strength in laboratory and site application test. As test results, bleeding capacity and ratio are decreased in case of decreasing water-cement ratio and increasing mixing velocity. Required compressive strength (1.5 MPa) considering safety factors in site is satisfied with the range of water-cement ratio 150% below, and test results of core strength are higher than those of specimen strength in the range of 8~23% by actual application of element members including outside and inside in site construction work. Therefore, optimum mix design of soil mixing wall is proposed in the range of unit cement $280kg/m^3$, unit bentonite $10kg/m^3$, water-cement ratio 150% and mixing velocity 90rpm and test results of site application case are satisfied with the required properties.

• Journal of Nutrition and Health
• /
• v.25 no.1
• /
• pp.42-55
• /
• 1992

To evaluate the effect of the feeding program of brown rice flake with soy milk or cow's milk to school children in rural areas. The survey was conducted twice before and after practice of feeding in March and July of 1990. The survey covered a total of 87 children aged from 7 to 12 in Ypsuk elementary school located in remote village of Sangju county. Kyung Buk province and the branch school of Songmyun elementary school located in remote village of Goisan county. Chung Buk province. Family environment dietary intake anthropometric data and biochemical tests were examined. The results are summerized as follows: The mean balance and food diversity at lunch were significantly lower than those at breakfast and dinner. Mean daily energy and nutrient intakes were below the Korean RDA's except for intakes of niacin vitamin A and ascorbic acid Especially intake of calcium was not reached to 50% of Korean RDA's. Most of anthropometric data of subjects surveyed showed slightly higher results in summer than those in spring except for weight for height and sitting height for height. The percentage of anemic according to hematocrit criterion was not reduced during this period. however urinary urea nitrogen/creatinine ratio was improved. The conbined feeding program of brown rice flake with soy milk or cow's milk was not sufficient to support the children's growth. So the survey recommends the support of goberment to the school lunch program in the remote village.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.6 no.3
• /
• pp.9-16
• /
• 2003

In support of remote sensing applications for monitoring processes of the Earth system, research was conducted to analyze the basic spectral response related to background soil and vegetation cover characteristics in the visible and reflective infrared wavelengths. Surface samples of seven stations were examined. Five soils were from land-field and two soils from tideland areas. The vegetation cover experiment was conducted on seven soil samples with known natural moisture content (%) by weight. To study the effect of vegetation cover, spectral measurements were taken on five or six vegetation cover treatments of the seven soils with 3 replications in air dry conditions. For collecting RS base data, used spectro-radiometer that measures reflection characteristics between 300~1,100nm was used and measured the reflection of vegetation from bean leaves. The relationships were evaluated for both a general soil line and for the individual lines of five soils, under air-dried condition as well as different vegetation cover ratio, through the determination of the line parameters. As vegetation cover ratio in bean leaves increases, features of soil reflectance decrease and those of plant reflectance become more and more apparent. In proportion to vegetation cover rate, near-infrared reflectance increased and visible reflectance decreased. Analysis results are compared to commonly used vegetation indices(RVI and NDVI ).

• Journal of the Korean Society of Clothing and Textiles
• /
• v.38 no.3
• /
• pp.397-403
• /
• 2014

In this study, various types of Jumchi Hanji were made to develop shroud materials as a new use for Hanji. The properties of Hanji (basis weight, thickness, apparent density, bulk, tensile strength, wet tensile strength, elongation ratio, tear strength, bursting strength, and folding endurance) are measured. In all cases, Jumchi Hanji had a higher thickness, lower apparent density and higher bulk than Hanji because pores in the intervals of mulberry fiber are composed of bulk. So, it is considered to carry a value as a textile material. As for the results of the strength analysis of Jumchi Hanji, Jumchi technique enhances 25% of elongation ratio, which is regarded the most important role in textiles and 35% of bulk. Moreover, it was shown that it enhanced overall strength. In conclusion, it implies the possibility of applying it as a shroud material. Jumchi Hanji is thought to have enough potential to be developed as a material to carry the characteristics of Hanji in the textile market.

• Fisheries and Aquatic Sciences
• /
• v.12 no.2
• /
• pp.104-110
• /
• 2009

Feeding trials were performed at two different water temperatures (summer and winter seasons) to identify suitable protein and lipid (energy) levels to be used in formulating extruded pellets for olive flounder. Experiments were conducted to determine the effects of protein and lipid levels in extruded pellets on the growth and body composition of the flounder in both feeding trials. Six experimental diets were prepared containing three protein levels (46%, 51%, and 56%) and two lipid levels (10% and 17%). In the first experiment, during the summer season ($22{\pm}2.2^{\circ}C$), a triplicate group of fish (initial weight, 114 g) were fed to satiation one of the six diets for 11 weeks. The highest weight gain was observed in fish fed the 56/17 (% protein/% lipid) diet, but this weight gain was not significantly different from that of fish fed the other diets, except for those fed the 46/10 diet. The feed efficiency and protein efficiency ratio of fish fed the 17% lipid diets were higher than those of fish fed the 10% lipid diets at each protein level. In the second experiment, during the winter season ($13{\pm}1.5^{\circ}C$), a triplicate group of fish (initial weight, 107 g) were fed to satiation one of the six diets for 9 weeks. Weight gain was not significantly different among all groups. The feed efficiency and protein efficiency ratio tended to increase with increasing dietary lipid level at each protein level. The whole-body crude lipid content of the of fish fed the 17% lipid diets was significantly higher than that of fish fed the 10% lipid diets at each protein level in both feeding trials. Based on the data obtained in this study, the inclusion of dietary protein at a level of 46% appears to be sufficient to support optimal growth, and increasing the dietary lipid level from 10% to 17% had no beneficial effects on the growth and feed utilization of olive flounder (110-300 g), except for fish fed a 56% protein diet in the summer season.

• Advances in nano research
• /
• v.9 no.4
• /
• pp.263-276
• /
• 2020

In this article, the acoustic responses of free vibrated natural fibre-reinforced polymer nanocomposite structure have been investigated first time with the help of commercial package (ANSYS) using the multiphysical modelling approach. The sound relevant data of the polymeric structure is obtained by varying weight fractions of the natural nanofibre within the composite. Firstly, the structural frequencies are obtained through a simulation model prepared in ANSYS and solved through the static structural analysis module. Further, the corresponding sound data within a certain range of frequencies are evaluated by modelling the medium through the boundary element steps with adequate coupling between structure and fluid via LMS Virtual Lab. The simulation model validity has been established by comparing the frequency and sound responses with published results. In addition, sets of experimentation are carried out for the eigenvalue and the sound pressure level for different weight fractions of natural fibre and compared with own simulation data. The experimental frequencies are obtained using own impact type vibration analyzer and recorded through LABVIEW support software. Similarly, the noise data due to the harmonically excited vibrating plate are recorded through the available Array microphone (40 PH and serial no: 190569). The numerical results and subsequent experimental comparison are indicating the comprehensiveness of the presently derived simulation model. Finally, the effects of structural design parameters (thickness ratio, aspect ratio and boundary conditions) on the acoustic behaviour of the natural-fibre reinforced nanocomposite are computed using the present multiphysical model and highlighted the inferences.

• Transactions of Materials Processing
• /
• v.19 no.6
• /
• pp.337-343
• /
• 2010

Current need of weight reduction in automotive part increases the application for high strength steel (HSS). The various types of high strength steels have been used to produce chassis part, control arms and trailing arms for weight reduction and increasing of fatigue durability such as dual phase steel (DP) and ferrite bainite steel (FB). But, DP and FB steels have proven to show inferiority in durability as well as press formability. Edge cracking occurred often in flange forming and hole expansion processes is the major failure encountered. This paper discussed the behavior of edge stretchability of high strength steel of DP and FB steels. Experimental works have been conducted to study the effect of punch clearance and burr direction on hole expansion ratio (HER). Also finite element simulation (FEM) has been preformed to clarify the mechanism of flange crack and support the experimental results on HER of DP and FB steels. It was simulated the whole process of blanking process following by hole expansion process and ductile fracture criterion named the modified Cockcroft-Latham model which was used to capture the fracture initiation. From the hole expansion tests and FEM simulation studies it was concluded that ferrite bainite steel showed better stretch-flangeability than dual phase steel. It was attributed to the lower work hardening rate of ferrite bainite steel than dual phase steel at the sheared edge.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.14 no.1
• /
• pp.117-122
• /
• 2015

There has been a string of negligent accidents at the seaside, and there is presently a shortage of professional equipment to deal with such accidents. The purpose of this paper is to assess the development of a rescue lift. The critical load of a support pipe, and the stability of the rescue lift, were investigated using structural analysis. Critical-load analysis was used to study the effects of variations in the pipe length and the ratio of the moment of inertia. The total weight of the developed rescue lift is approximately 20.7 kg, and the lift passed the load tests.