• 보건교육건강증진학회지
• /
• 제13권2호
• /
• pp.130-166
• /
• 1996

As compared with body height and body weight by ages and sexes, by means of the data reported under other researchers from 1967 to 1994 for 33 years, this study obtained the estimate value of body height and body weight by ages and sexes for the same period, and figured out prediction value of body height and body weight in the ages of between 6 and 14 from 1995 to 2000. These surveys and measurements took for one year from October 1st 1994 to September 30th. As shown in the 〈Table 1〉, in order to calculate the establishment, estimate value and prediction value of the chronological regression model of body height and body weight, by well-grounded 17 representative research papers, this research statistically tested propriety of liner regression model by the residual analysis in advance of being reconciled to simple liner regression model by the autonomous variable-year and the subordinate variable-body weight and measured prediction value, theoretical value from 1962 to 1994 by means of 2nd or 3rd polynomial regression model, with this redult did prediction value from 1995 to 2000. 1. Chronological Change of Body Height and Body Weight The analysis result from regression model of the chronological body height and body weight for the aged 6 - 16 in both sexes ranging from 1962 to 1994, corned from the 〈Table 2-20〉. On the one hand, the measurement value of respective researchers had a bit changes by ages with age growing, but the other hand, theoretical value, prediction value showed the regular increase by the stages and all values indicated a straight line on growth and development with age growing. That is, in case of the aged 6, males had 109.93cm in 1962 and females 108.93cm, but we found the increase that males had 1I8.0cm, females 1I3.9cm. In theoretical value, prediction value, males showed the increase from 109.88cm to 1I7.89cm and females from 109.27cm to 1I5.64cm respectively. There was the same inclination toward all ages. 2. Comparision to Measurement Value and Prediction Value of Body Height and Body Weight in 1994 As shown in the 〈Table 21〉, in case of body height, measurement value and prediction value of body height and body weight by ages and sexes almost showed the similiar inclination and poor grade, in case of body weight, prediction value in males had a bit low value by all ages, and prediction value in females had a high value in adolescence, to the contrary, a low value in adult. 3. Prediction Value of Body Height and Body Weight from 1995 to 2000 This research showed that body height and body weight remarkably increased in adolescence but slowly in adult. This study represented that Korean physique was on the increase and must be measured continually hereafter.

• 농업과학연구
• /
• 제47권4호
• /
• pp.753-767
• /
• 2020

The commercial value of strawberries is affected by various factors such as their shape, size and color. Among them, size determined by weight is one of the main factors determining the quality grade of strawberries. In this study, image technology was developed to predict the weight of strawberries using the shape characteristics of strawberry cultivars. For realtime weight measurements of strawberries in transport, an image measurement system was developed for weight prediction with a charge coupled device (CCD) color camera and a conveyor belt. A strawberry weight prediction algorithm was developed for three cultivars, Maehyang, Sulhyang, and Ssanta, using the number of pixels in the pulp portion that measured the strawberry weight. The discrimination accuracy (R2) of the weight prediction models of the Maeyang, Sulhyang and Santa cultivars was 0.9531, 0.951 and 0.9432, respectively. The discriminative accuracy (R2) and measurement error (RMSE) of the integrated weight prediction model of the three cultivars were 0.958 and 1.454 g, respectively. These results show that the 2D imaging technology considering the shape characteristics of strawberries has the potential to predict the weight of strawberries.

• 한국농공학회논문집
• /
• 제65권3호
• /
• pp.15-28
• /
• 2023

The compaction properties of the soil change depending on the physical properties, and are also affected by crushing of the particles. Since the particle size distribution of soil affects the engineering properties of the soil, it is necessary to analyze the material properties to understand the compaction characteristics. In this study, the size of each sieve was classified into four in the particle size analysis as a material property, and the compaction characteristics were evaluated by multiple regression and maximum dry unit weight. As a result of maximum dry unit weight prediction, multiple regression analysis showed R² of 0.70 or more, and DNN analysis showed R² of 0.80 or more. The reliability of the prediction result analyzed by DNN was evaluated higher than that of multiple regression, and the analysis result of DNN-T showed improved prediction results by 1.87% than DNN. The prediction of maximum dry unit weight using particle size distribution seems to be applied to evaluate the compacting state by identifying the material characteristics of roads and embankments. In addition, the particle size distribution can be used as a parameter for predicting maximum dry unit weight, and it is expected to be of great help in terms of time and cost of applying it to the compaction state evaluation.

• Bioinformatics and Biosystems
• /
• 제1권2호
• /
• pp.128-133
• /
• 2006

This paper compares domain combination based protein-protein interaction prediction method with domain based protein-protein interaction method. The prediction accuracy and reliability of the methods are compared using the same prediction technique and interaction data. According to the comparison, domain combination based prediction method has showed superior prediction accuracy to domain based prediction method for protein pairs with fully overlapped domains with protein pairs in learning sets. When we consider that domain combination based method has the effects of assigning a weight to each domain interaction, it implies that we can improve the prediction accuracies of currently available domain or domain combination based protein interaction prediction methods further by developing more advanced weight assignment techniques. Several significant facts revealed from the comparative studies are also described in this paper.

• Journal of Preventive Medicine and Public Health
• /
• 제32권1호
• /
• pp.60-64
• /
• 1999

환경오염과 관련된 건강효과 연구에서 흡연, 직업 등 교란변수의 영향을 효과적으로 배제할 수 있으면서 폐기능검사가 제대로 시행될 수 있는 연구대상으로 선호되고 있는 특정 연령층인 12세 학동의 보다 정확한 FVC와 FEV1 예측식을 만 들고자 전국 11개 중학교의 학생들(남자 256명, 여자 301명)을 대상으로 측정된 신장, 체중, 그리고 폐기능검사 값으로 신장-체중의 회귀식을 유도하였고, 이를 통해 12세 인구의 신장별 표준체중을 산출하였다. 이 표준체중과 실측체중의 차이인 잔차를 독립변수로 하여 폐기능 예측 식을 남녀별로 만들었는데, 남자의 경우는, FVC(ml) = 50.84 $\times$ 신장(cm) + 7.06 $\times$ 체중 잔차 - 4838.86, FEV1(m1) = 43.57 $\times$ 신장(cm) + 3.16 $\times$ 체증 잔차 4156.66 이었다. 여자에서는 FVC(ml) = 42.57 $\times$ 신장(cm) + 12.50 $\times$ 체중 잔차 - 3862.39, 그리고 FEV1(ml) = 36.29 $\times$ 신장(cm) + 7.74 $\times$ 체중 잔차 - 3200.94 이었다. 이렇게 얻어진 예측값들의 설명력(R2)은 남자에서 FVC, FEV1가 각각 0.708, 0.670이었고, 여자에서는 FVC, FEV1가 각각 0.580, 0.513이었다.

• 한국시스템다이내믹스연구
• /
• 제11권3호
• /
• pp.5-31
• /
• 2010

The purpose of this study is to develop a system dynamics model for growth prediction of low birth weight infants(LBWIs) based on nutrition. This growth prediction model consists of 9 modules; body weight, height, carbohydrate, protein, lipid, micronutrient, water, activity and energy module. The results of the model simulation match well with the percentiles of weights and heights of the Korean infants, also with the growth records of 55 LBWIs, under 37 weeks of gestational age, whose weights are appropriate for their gestational age. This model can be used to understand the current growth mode of LBWIs, predict the future growth of LBWIs, and be utilized as a tool for controlling the nutrient intake for the optimal growth of LBWIs in actual practice.

• Asian-Australasian Journal of Animal Sciences
• /
• 제7권3호
• /
• pp.441-448
• /
• 1994

Postweaning performance data were obtained on 187 group fed purebred Angus calves from 12 selected sires (six high and six low feed conversion sires) in 1985 and 1986. The objective of this portion of the study was to develop prediction equations for feed conversion from a stepwise regression analysis. Variables measured were on-test weight (ONTSTWT), on-test age (ONTSTAG), five weights by 28-d periods, seven linear body measurements: heart girth (HG), hip height (HH), head width (HDW), head length (HDL), muzzle circumference (MC), length between hooks and pins (HOPIN) and length between shoulder and hooks (SHHO), and backfat thickness (BF). Stepwise regressions for maintenance adjusted feed conversion (ADJFC) and unadjusted feed conversion (UNADFC) over the first 140 d of the test, and total feed conversion (FC) until progeny reached 8.89 mm of back fat were obtained separately by conversion groups and sexes and for combined feed conversion groups and sexes. In general, weights were more important than linear body measurements in prediction of feed utilization. To some extent this was expected as weight is related directly to gain which is a component of feed conversion. Weight at 112 d was the most important variable in prediction of feed conversion when data from both feed conversion groups and sexes were combined. Weights at 84 and 140 d were important variables in prediction of UNADFC and FC, respectively, of bulls. ONTSTWT and weight at 140 d had the highest standardized partial regression coefficients for UNADFC and ADJFC, respectively, of heifers. Results indicated that linear measurements, such as MC, HDL and HOPIN, are useful in prediction of feed conversion when feed in takes are unavailable.

• Journal of the Korean Data and Information Science Society
• /
• 제17권4호
• /
• pp.1151-1160
• /
• 2006

The similarity weight, the pearson's correlation coefficient, which is used in the recommender system has a weak point that it cannot predict all of the prediction value. The similarity weight, the vector similarity, has a weak point of the high MAE although the prediction coverage using the vector similarity is higher than that using the pearson's correlation coefficient. The purpose of this study is to suggest how to raise the prediction coverage. Also, the MAE using the suggested method in this study was compared both with the MAE using the pearson's correlation coefficient and with the MAE using the vector similarity, so was the prediction coverage. As a result, it was found that the low of the MAE in the case of using the suggested method was higher than that using the pearson's correlation coefficient. However, it was also shown that it was lower than that using the vector similarity. In terms of the prediction coverage, when the suggested method was compared with two similarity weights as I mentioned above, it was found that its prediction coverage was higher than that pearson's correlation coefficient as well as vector similarity.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2021년도 춘계학술대회
• /
• pp.22-24
• /
• 2021

본 논문은 노드와 엣지로 이루어진 그래프 구성을 통해 신경망을 활용하여 엣지 가중치 예측 방안을 제안하고자 한다. 사회 구성요소 중 하나인 브랜드들의 중요도 높은 전략 중 출점전략에 대해 초점을 맞추어보았다. 본 논문에서는 1) 브랜드 지점들을 노드로 구성하고, 지점 간 관계를 엣지로 구성한다. 그리고 지점 간 실제 도보 및 주행 가능 거릿값을 엣지 가중치로 표현한 그래프를 구성한다. 그리고 2) 엣지를 수치화하여 신경망을 학습해 엣지의 가중치인 지점 간 거릿값을 예측하는 방안을 제안한다. 제안한 방식을 활용함으로 예측되는 특정 브랜드의 출점 범위를 성공적인 브랜드의 출점전략 분석할 시에 활용할 수 있을 것으로 예상한다.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송∙미디어공학회 2019년도 추계학술대회
• /
• pp.20-21
• /
• 2019

The Joint Video Experts Team (JVET) has been working on the development of next generation of video coding standard called Versatile Video Coding (VVC). Position Dependent Intra Prediction Combination (PDPC) which is one of the major tools for intra prediction refines the prediction through a linear combination between the reconstructed samples and the predicted samples according to the sample position. In VVC WD6, nScale which is shift value that adjusts the weight is determined by the width and height of the current block. It may cause that PDPC is applied to regions that do not fit the characteristics of the current intra prediction mode. In this paper, we define nScale for each width and height so that the weight can be applied independently to the left and top reference samples, respectively. Experimental results show that, compared to VTM 6.0, the proposed method gives -0.01%, -0.04% and 0.01% Bjotegaard-Delta (BD)-rate performance, for Y, Cb, and Cr components, respectively, in All-Intra (AI) configuration.