• Journal of Korean Physical Therapy Science
• /
• v.16 no.3
• /
• pp.11-17
• /
• 2009

Background: The purpose of this study was designed to find out the effectiveness of reposition sense, muscle fatigue response on lumbar spine after apply lumbosacral stabilization exercise program to 4 patients with chronic low back pain and for 12 weeks. Method: In this study the reposition sense was measured in 3 angle(60, 30, 12) of the lumbar spine motion with blind by MedX test machine and the difference of instability to lumbar vertebra segments in flexion, extension test of standing position and spinal load test Mattress Test by Spinal Mouse. The stabilization exercise program was applied 2 times a week for 12 weeks in hospital and 2 times a day for 20 minutes at home. Result: The results of the present study were that the repositioning sense was appeared the most error in 12 angles of lumbar flexion and Men was appeared to decrease an error more than female in average value of 4 angles after 12 weeks. And average error of male was decrease more than female. Thus the effects of lumbosacral stabilization exercise was improved repositioning sense of prorioceptor. Fatigue response test(FRT) results, in male, was raised muscle fatigue rate during increase weight, on the other hand female appeared lower than male. Conclusion: As a results, lumbosacral stabilization exercise was aided to improvement of lumbar spine repositioning sense and vertebra segments stabilization. It was showed the rate of decrease in typically 12 degree angle point of each 3 angle(60, 36, 12). Especially, that spine instability patients will have a risk when in lifting a load or working with slight flexion posture around 12 degree during the daily of living life and it is probably to increase recurrence rate. Thus, not only lumbar extension muscle strength but also stability of vertebra segments in lumbar spine may be very important.

• Journal of Korean Physical Therapy Science
• /
• v.16 no.3
• /
• pp.55-66
• /
• 2009

Background: The purpose of this research was to investigate the factors affecting the low back pain of workers in hospital. 214 subjects waking at two general hospitals in Yosu city participated in this survey. Subjects consisted of doctors, nurses, medical engineers, officers and general laborers. The survey data were collected by a written questionnaire which made out by themselves for 25 days, from fourth August to 29th August, 2008. Methods: The questionnaire consisted of four categories, general, occupational, working habitual and the daily living characteristics. The collected data were analyzed by Chi-square test based on the present or absent of low back pain. Results: 1. In the general characteristics, low back pain had no significant relationship to all factors, sex, ago, body mass index, weight and height. 2. In the occupational characteristics, the phase of distribution of low back pain had statistical significant differences in the working hours a week, satisfaction of pay, satisfaction of occupation(p<0.05). However low back pain did not significantly related to the kind of occupation, period of work and degree of stress. 3. In the habitual characteristics, low back pain was significantly influenced by working posture, frequency of using lumbar and heavy material lifting, monotonous repetition of working operation and noise(p<0.05). No significant difference was shown in the factor of convenience of chair. 4. In the daily living characteristics, low back pain shown the significant differences in walking time a day, status of health and smoking pattern(p<0.05). there were, however, no significant differences in the aspect of the kind of house and bed, sleeping attitude, driving, riding time on the vehicle, exercising, frequency of cultural life and drinking alcohol. Conclusion: when I see above resultants totally, it appears a higher incidence caused by working environment rather than living habit and then consequently compared to hospital workers, they also have high incidence like others. In order to reduce incidence of low back pain and enjoy the our life we need to educate ourselves preventing program for low back pain and try to effort for preventing of low back pain on each department and individual.

• Research in Community and Public Health Nursing
• /
• v.9 no.1
• /
• pp.213-222
• /
• 1998

The prevalence rate of low back pain in nurses is higher than that of other jobs, because there are many more risk factors(for example, standing postures, lifting and carrying heavy loads, transfering patients, changing a patient's position etc.). This investigation is to provide basic data for prevention of low back pain by analyzing the prevalence rate and related factors of low back pain in nurses(esp. operating room staff) in general hospitals. A self-reported questionaire survey was carried out on three hundred and five nurses of three general hospitals in Seoul from June, 1996 to August, 1996. Subjects of the survey were divided into a low back pain group(LBP) and a cotrol group to investigate the association between low back pain and the general characteristics and work related factors of each group. The results were as follows: 1. In the subjects of the survey, the prevalence rate of low back pain was 60.0% for the last year. 2. 73.6% of operating room(OR) staff complained of low back pain. 3. Standing for a long time and working in twisting postures were associated with low back pain, and so were the shift, the type of work, and the frequency of transfering patients. 4. The weight loads which nurses frequently carried were, under 5kg, 5-10kg, 15-20kg, 15-20kg, over 20kg, and all, except for 10-15kg, were associated with LBP. 5. 76.9% of the LBP experienced low back pain within 3 years after starting nursing jobs. 6. Concerning the degrees of low back pain: 75.8% was limited to waist; 18.8% reached the knees; 4.2% reached ankles. In conclusion, the prevalence rate of low back pain in general hospital nurses was associated with the works in operating room and other work related factors, therefore it is necessary to develop on educational program for the prevention of low back pain as well as and to improve working environments.

• Journal of the Korea Concrete Institute
• /
• v.28 no.2
• /
• pp.129-139
• /
• 2016

Cast-in-place concrete-filled hollow PC (HPC) columns are used to reduce lifting load of heavy-weight PC columns and to improve the structural integrity of joints. In the present study, a new type of HPC column was proposed to improve the productivity and structural integrity of the concrete. To form the hollow PC columns, a permanent inner form was prefabricated using structural deck plates and penetrated lateral bars. Half-scale specimens of four HPC columns were tested under combined axial compression and lateral cyclic loading to evaluate the seismic resistance. In the design of test specimens, various parameters such as the spacing of lateral re-bars, the use of steel fiber, and the thickness of PC cover were considered. The test results showed that the proposed HPC columns generally exhibited satisfactory load-carrying capacity and deformation capacity without brittle failure of PC. If closely spaced hoops or fiber reinforcements are used for PC, the deformation capacity can be improved further by restraining PC spalling.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.23 no.3
• /
• pp.183-190
• /
• 2017

Carton clamp truck is widely perceived as the high-efficient handling equipment of factory premises and warehouse by its capability of palletless handling. Therefore, the significance of a lab-based handling simulation is becoming higher with the growth of clamp truck usage. In this study, preliminary FEA and design of handling test courses for the lab-based simulation of carton clamp truck handling were performed, and the PSD analyses were performed for the modified one for the test course proposed by Park et al. (2017) as well as ASTM D 6055 and ISTA 3B standards. For the vibration in all directions, the vibration energy intensity analyzed by ISTA 3B standard showed higher than that by the other two cases. A FEA was performed for the handling operation of the sudden stop of the clamps after lifting the target HCP (heavyweight refrigerator corrugated package, w=180 kgf) up to the specified height. The slip distance between the clamp arm and the target HCP was 0.85 mm. The simulation result of 0.85 mm was 3.7 times lower than the experimental result (3.2 mm) obtained by Park et al. (2017), and it was estimated that the deviation comes from both the experimental error by weight imbalance of target HCP, and excessive simplification during the FE modelling of target HCP.

• Korean Journal of Computational Design and Engineering
• /
• v.15 no.5
• /
• pp.383-392
• /
• 2010

The purpose of this study is to develop three Judo-doll systems for enhancement of Judo's performance. Traditional Judo training requires a human training partner. Unfortunately it is not always easy to find one. Multifunctional Judo-doll training system has therefore been developed, and is described here. The system consists of a dummy, a power generating mechanism, and kinematic links. The power-generating mechanism generates forces similar to those of a human, by adjusting deadweights and controlling powderbrake's forces. The powderbrake force is controlled by the microprocessor according to the exercise scenario. The kinetic links, which mimic a human training partner's motions, has been developed based on a $Vicon^{TM}$ system's analysis of the movement of human training partners. This mechanism whose name is "L link-wire" consists of L type links, wire, roller, and dead weight. This mechanism generates the force that leads the link to the neutral position regardless the link is pushed or pulled. The lifting mechanism that lifts the doll when the one-armed shoulder throw skill is applied is also developed. A 32-bit microprocessor controls the whole system; it reads the loadcell data, controls the electromagnetic force, and communicates with a PC via Bluetooth. The training history, including loadcell data, date, and training time, is stored in the PC for analysis. This training system can be used to enhance the Judo performance of any self training player.

• Archives of Plastic Surgery
• /
• v.39 no.1
• /
• pp.67-70
• /
• 2012

Massive weight loss results in skin excess, leading to an unsatisfying body contour. Various thigh lift procedures can correct flabby skin in the lower leg. We present a lower body contouring technique with a report on two patients. The procedure is determined by the body contour of the patient. As the skin excess in the thigh area tended to appear mostly on the medial side, a vertical medial thigh lift was considered. Moreover, for patients with a pear/guitar-shaped body contour, we added the spiral thigh lift for skin excess in the buttocks and the lateral thigh area. The extent of tissue to excise was determined by pinching the patient in a standing position. The inferior skin flap was fixed to non-movable tissue, which was helpful for lifting the tissue and preventing the widening of the scar. After the operation, a drain was kept for 3 to 4 days. A compressive garment was used after removing the drain. There were no complications. The patients were discharged 6 to 8 days after the operation. In conclusion, skin excess, especially in the lower body, can be corrected by a thigh lift combining several procedures, varying from person to person.

• Journal of Korean Physical Therapy Science
• /
• v.13 no.4
• /
• pp.7-16
• /
• 2006

The purpose of this study was designed to find out the effectiveness of vertebral segment instability, muscle fatigue response on lumbar spine after apply lumbosacral stabilization exercise program to 4 patients with chronic low back pain and for 12 weeks. In this study, the lumbar spine motion with blind by MedX test machine and the difference of instability to lumbar vertebra segments in flexion, extension test of standing position and spinal load test(Matthiass Test) by Spinal Mouse. The stabilization exercise program was applied 2 times a week for 12 weeks in hospital and 2 times a day for 20 minutes at home. The results of the present study were as follows: 1. Instability test of lumbar vertebra segment is 2 type differential angle test between vertebrae segment and loading test of spine(matthiass) by Spinal Mouse. It appeared to improve stability of segments in sagittal plane after program. So lumbar spine curve increased lordosis toward anterior and was improved of the lumbar spine flexibility in flexion and extension. Specially, in matthiass test, ( - ) value was increased between lumbar vertebra segment when was the load on spine. And so stability improved after program. 2. Fatigue response test(FRT) results, in male, was raised muscle fatigue rate during increase weight, on the other hand female appeared lower than male. As a results, lumbosacral stabilization exercise was aided to improvement of lumbar spine vertebra segments stabilization. Spine instability patients will have a risk when in lifting a load or working with slight flexion posture during the daily of living life and it is probably to increase recurrence rate. Thus, not only lumbar extension muscle strength but also stability of vertebra segments in lumbar spine may be very important.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.8
• /
• pp.753-757
• /
• 2015

This paper introduces an experimental rescue robot, HUBO T-100 and presents the optimal motion control method. The objective of the rescue robot is to extract patients or wounded soldiers in the battlefield and hazardous environments. Another mission is to dispose and transport an explosive ordnance to safe places. To execute these missions, the upper body of the rescue robot is humanoid in form to execute various kinds of tasks. The lower body features a hybrid tracked/legged design, which allows for a variety of mode of locomotion, depending on terrain conditions in order to increase traversability. The weight lifting motion is one of the most important task for performing rescue related missions because the robot must lift an object or impaired person lying on the ground for transferring. Here, dynamics based motion optimization is employed to minimize joint torques while maintaining stability simultaneously. Physical experiments with a real humanoid robot, HUBO T-100, are presented to verify the proposed method.

• Journal of Acupuncture Research
• /
• v.24 no.2
• /
• pp.155-167
• /
• 2007

Objectives : This study was performed to evaluate the general distribution and the efficacy of oriental medical treatment for low back pain. Methods: We have selected of the moxa bucket moxibustion. We make a comparative study of the thermodynamic characteristics of moxa bucket moxibustion. We examined combustion times, temperatures, temperature gradients in each period during a combustion of moxa bucket moxibustion made by oak wood. Results : The 80 cases of low back pain patients was analyzed according to the distribution of sex, age, the period of disease, contributing factor, the patient-condition on admission, the symptom on admission, the duration of admission, the reading of the X-ray and the treatment efficacy was evaluated respectively. 1. Female was more than male in the ratio of 1:1.2, and thirties and seventies 25% the most, the acutest phase 46.3% the most, reason unknown 33.8% the most, Grade III 50% the most, L.B.P. only 51.3% the most, the day of 6-10 30% the most, compression Fx 30% the most. 2. In the total treatment result, the good was 51.3%, the excellent 22.5%, the fair 17.5%, the poor 8.8% in order. About 'the effective rate'(the percentage of positive effective treatment cases) of each distribution, the fifties 100% the most, the acutest phase 97.3% the most, the slip down, weight lifting, overuse 100% the most respectively, Grade III 97.5% the most, L.B.P. only 95.1% the most, the day of 11-15 100% the most, HN.P. 93.3% the most. Conclusions : We have known the efficacy of oriental medical treatment for L.B.P. was good and early treatment was better than late treatment and main cause of L.B.P. was degenerative change.