• 제목/요약/키워드: Wedge factor

검색결과 100건 처리시간 0.022초

Stability analysis of a rock slope in Himalayas

  • Latha, Gali Madhavi;Garaga, Arunakumari
    • Geomechanics and Engineering
    • /
    • 제2권2호
    • /
    • pp.125-140
    • /
    • 2010
  • Slope stability analysis of the right abutment of a railway bridge proposed at about 350 m above the ground level, crossing a river and connecting two huge hillocks in the Himalayas, India is presented in this paper. The site is located in a highly active seismic zone. The rock slopes are intensely jointed and the joint spacing and orientation are varying at different locations. Static slope stability of the rock slope is studied using equivalent continuum approach through the most commonly used commercial numerical tools like FLAC and SLOPE/W of GEOSTUDIO. The factor of safety for the slope under static conditions was 1.88 and it was reduced by 46% with the application of earthquake loads in pseudo-static analysis. The results obtained from the slope stability analyses confirmed the global stability of the slope. However, it is very likely that there could be possibility of wedge failures at some of the pier locations. This paper also presents the results from kinematics of right abutment slope for the wedge failure analysis based on stereographic projections. Based on the kinematics, it is recommended to flatten the slope from 50o to 43o to avoid wedge failures at all pier locations.

초기재령 콘크리트의 파괴특성 (Fracture Characteristics of Concrete at Early Ages)

  • 이윤;김진근
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 2001년도 봄 학술발표회 논문집
    • /
    • pp.215-220
    • /
    • 2001
  • The objective of this study is to examine the fracture characteristics of concrete at early ages such as critical stress intensity factor, critical crack-tip opening displacement, fracture energy based on the concepts of the effective-elastic crack model and the cohesive crack model. A wedge splitting test for Mode I was performed on cubic wedge specimens with a notch at the edge. By varying strength and age, load-crack mouth opening displacement curves were obtained and the results were analyzed by linear elastic fracture mechanics. The results from the test and analysis showed that critical stress intensity factor and fracture energy increased, and critical crack-tip opening displacement decreased with concrete age from 1 day to 28 days. The obtained fracture parameters at early ages may be used as a fracture criterion and an input data for finite element analysis of concrete at early ages.

  • PDF

암반 사면의 파괴 예측을 위한 불연속면 분포 특성 분석 (Analysis of Discontinuity Distribution Property to Predict Rock Slope Failure)

  • 윤운상;김정환;배기훈
    • 한국지반공학회:학술대회논문집
    • /
    • 한국지반공학회 1999년도 가을 학술발표회 논문집
    • /
    • pp.147-152
    • /
    • 1999
  • Distribution of fracture system is an important factor to analyse instability of jointed rock slope. In the most case of rock slopes, joint distribution properties are related to potential, shape, size and locality of slope failure. The purpose of this paper is to present an application of fracture characterization related to rock slope failure. Fracture data used in this study are collected by scanline survey. Two aspects of fracture characterization for rock slope are handled in this study First, In order to determine the potential and shape of slope failure, trace length of joints is considered as the weighting factor about collected orientation data. Second, Relationship between trace length and spacing is analysed to estimate failure location and size. The distribution of fracture system is directly influenced on wedge failure. It is effective to analyse the orientation of fractures by using weighting factors associated with the trace length of fractures rather than to analyse only that of fractures. It gives a conclusion that the wedge failure occurred along the peak of fracture density(or intensity) cycles.

  • PDF

선량계측인자에 따른 기능강화동적쐐기와 금속쐐기의 비교 (Comparison of Enhanced Dynamic Wedge with Physical Metal Wedge based on the Basic Dosimetric Parameters)

  • 이정우;홍세미;최경식;정진범;최보영;장홍석;서태석
    • 한국의학물리학회지:의학물리
    • /
    • 제16권2호
    • /
    • pp.70-76
    • /
    • 2005
  • 기능강화동적쐐기는 쐐기 형태의 선량 분포를 만드는 방법과 선량 특성적인 면에서 금속쐐기와 상당한 차이를 가지고 있다. 기능강화동적쐐기의 임상적용을 위해서는 금속쐐기와 다른 선량특성을 분석하고 이에 따른 적절한 커미셔닝이 필수적이다. 본 연구의 목적은 기본 선량계측인자에 기초한 기능강화동적래기와 금속쐐기의 선량특성을 분석하는 데 있다 선량 계측학적 특성을 나타내는 심부선량분포, 조사면 주변 선량, 표면선량, 실효 쐐기인자, 쐐기의 선량측면도를 측정, 분석하였다. 또한 열린 조사면과 금속쐐기와의 비교측정을 통해 기능강화동적쐐기가 가지고 있는 고유한 특성을 분석하였다. 기능강화동적쐐기의 선량측면도 측정은 Chamber Array 24 (CP24)를 이용하였으며, Golden Segmented Treatment Table (Golden-577)로 구현한 치료 계획 장치의 계산 값과 비교하였다. 또한 실호쐐기인자 측정은 각각의 X, Y 콜리메이터에 따른 특성을 분석하였다. 심부 선량 백분율측정에서 열린 조사면과 기능강화쐐기의 비교결과, $0.2\~0.5\%$ 이내로 일치하였고, 금속 쐐기인 경우 약 $2\%$의 비교적 큰 차이를 보였다. 조사면 주변선량측정에서는 금속쐐기가 약 $1\%$ 높았다. 표면선량 측정 결과, 금속쐐기가 약 $10\%$ 낮게 평가되었다 기능강화쐐기의 실효쐐기인자는 Y jaw가 커짐에 따라 연속적으로 감소됨을 알 수 있었다. X jaw에 따른 쐐기인자 의존도 측정에서는 X jaw에 따른 의존도는 거의 없는 것으로 평가되었다. 또한 비대칭 조사면의 쐐기 인자측정에서는 비대칭에 상관없이 Y jaw의 크기만 같으면 실효쐐기인자가 같았다. 선량측면도 측정에서는 CA24를 이용해 얻은 실측값과 Golden STT로 Cadplan에서 구현한 계산 값이 $1\%$이내로 일치하였다. 본 연구를 통해 기능강화동적쐐기가 가지고 있는 특성을 분석하였으며, 금속쐐기를 대체할 수 있는 유용한 도구임을 알 수 있었다.

  • PDF

초기재령 콘크리트의 파괴 특성 (Fracture Characteristics of Concrete at Early Ages)

  • 이윤;김진근
    • 콘크리트학회논문집
    • /
    • 제14권1호
    • /
    • pp.58-66
    • /
    • 2002
  • 본 연구의 목적은 유효탄성균열모델과 점성균열모델의 개념에 기초한 임계응력확대계수, 임계균열단개구변위와 파괴에너지, 이선형 연화 곡선같은 콘크리트의 파괴특성들을 초기재령 콘크리트에 관해 구명하는 것이다. 이를 위해 모드 I의 파괴를 일으킬 수 있는 쐐기쪼갬시험이 노치가 있는 육각형의 쐐기 시험체에 대하여 수행되었다. 강도와 재령의 변화에 따라 하중-균열입구변위 곡선이 얻어졌으며, 이것은 선형탄성 파괴역학과 유한요소법에 의해 분석되었다. 실험 결과를 분석한 결과, 재령 1일부터 재령 28일까지의 임계응력확대계수와 파괴에너지는 증가하였으며, 임계균열단개구변위는 감소하였다. 또한 수치해석을 통하여 재령 1일부터 재령 28일까지의 이선형 연화 곡선의 네 파라미터를 구할 수 있었다. 이렇게 얻어진 초개재령 콘크리트의 파괴특성치와 이선형 연화 곡선은 초기재령 콘크리트의 파괴 기준과 유한요소해석시의 입력 상수로서 사용될 수 있을 것이다.

탄성표면파의 반사계수를 이용한 파괴응력의 해석 (The analysis of fracture stress using reflection coefficient of surface acoustic wave)

  • 신진섭;김장권;전계석
    • 한국음향학회지
    • /
    • 제10권3호
    • /
    • pp.13-18
    • /
    • 1991
  • 본 연구에서는 취약한 고체의 표면에 존재하는 crack에 탄성표면파를 입사 시켰을 때 발생하는 반사계수를 측정하여 파괴응력을 해석하는 방법을 연구 분석하였다. Crack이 존재하는 취약한 고체에서의 파괴응력은 임계응력확대계수와 정규화된 최대응력확대계수의 함수로써 나타나며, 이 때 정규화된 최대응력확대계수는 탄성표면파의 반사계수를 측정하여 구할 수 있었다. 실험을 위하여 Pyrex glass원판 중앙에 깊이가 0.5mm~0.9mm인 crack을 제작하였고, SAW wedge transducer를 피치캐치(pitch-catch) 모드로 구성하여 반사계수를 측정하고 파괴응력값을 산출하였으며 UTM(Universal Testing Machine)으로 측정한 값과 비교 분석하였다.

  • PDF

한 면에 ∧/∨형 리브가 있는 2벽면 수축 사각채널의 열전달 증가 (Enhanced heat transfer in the convergent rectangular channels with ∧/∨-shaped ribs on one wall)

  • 이명성;유지의;정희재;최동근;하동준;고진수;안수환
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제40권4호
    • /
    • pp.270-274
    • /
    • 2016
  • 양 벽면이 수축되는 채널에서 ${\vee}/{\wedge}$형 리브의 각도가 열전달에 미치는 효과를 실험적으로 조사하였다. 한 벽면에만 설치된 ${\vee}/{\wedge}$형 리브의 충돌 각은 각각 $30^{\circ}$, $45^{\circ}$, $60^{\circ}$ 그리고 $90^{\circ}$이다. 리브의 높이(e)는 10 mm 그리고 리브 간격(p)과 높이(e)비는 10으로 제작하였다. 길이가 1,000 mm인 시험 부는 입구의 단면적은 $100mm{\times}100mm$, 출구는 $50mm{\times}100mm$으로 제작하였다. 레이놀즈수가 22,000에서 75,000까지의 범위에서 실험을 수행하였다. 연구결과 전체적으로 레이놀즈 수가 높을수록 누셀트 수가 컸고, ${\wedge}$$45^{\circ}$ 리브가 가장 누셀트 수가 컸다.

Dosimetric Characteristics of 6 MV Modified Beams by Physical Wedges of a Siemens Linear Accelerator

  • Zabihzadeh, Mansour;Birgani, Mohammad Javad Tahmasebi;Hoseini-Ghahfarokhi, Mojtaba;Arvandi, Sholeh;Hoseini, Seyed Mohammad;Fadaei, Mahbube
    • Asian Pacific Journal of Cancer Prevention
    • /
    • 제17권4호
    • /
    • pp.1685-1689
    • /
    • 2016
  • Physical wedges still can be used as missing tissue compensators or filters to alter the shape of isodose curves in a target volume to reach an optimal radiotherapy plan without creating a hotspot. The aim of this study was to investigate the dosimetric properties of physical wedges filters such as off-axis photon fluence, photon spectrum, output factor and half value layer. The photon beam quality of a 6 MV Primus Siemens modified by 150 and 450 physical wedges was studied with BEAMnrc Monte Carlo (MC) code. The calculated present depth dose and dose profile curves for open and wedged photon beam were in good agreement with the measurements. Increase of wedge angle increased the beam hardening and this effect was more pronounced at the heal region. Using such an accurate MC model to determine of wedge factors and implementation of it as a calculation algorithm in the future treatment planning systems is recommended.

Modeling of chloride diffusion in concrete considering wedge-shaped single crack and steady-state condition

  • Yang, Keun-Hyeok;Cheon, Ju Hyun;Kwon, Seung-Jun
    • Computers and Concrete
    • /
    • 제19권2호
    • /
    • pp.211-216
    • /
    • 2017
  • Crack on concrete surface allows more rapid penetration of chlorides. Crack width and depth are dominant parameters for chloride behavior, however their effects on chloride penetration are difficult to quantify. In the present work, the previous anisotropic (1-D) model on chloride diffusion in concrete with single crack is improved considering crack shape and roughness. In the previous model, parallel-piped shape was adopted for crack shape in steady-state condition. The previous model with single crack is improved considering wedge shape of crack profile and roughness. For verifying the proposed model, concrete samples for nuclear power plant are prepared and various crack widths are induced 0.0 to 1.2 mm. The chloride diffusion coefficients in steady-state condition are evaluated and compared with simulation results. The proposed model which can handle crack shape and roughness factor is evaluated to decrease chloride diffusion and can provide more reasonable results due to reduced area of crack profile. The roughness effect on diffusion is evaluated to be 10-20% of reduction in chloride diffusion.