• 한국항공우주학회지
• /
• 제40권2호
• /
• pp.146-156
• /
• 2012

비행 중 결빙은 항공기 운용에 위험한 상황을 초래하게 되며, 개발 및 감항 인증 과정중 성능과 안전에 미치는 영향이 평가되어야 한다. 평가를 위한 결빙 풍동시험에서 스케일링 기법은 실제와 동등한 수집율과 결빙량이 모사되는 대체시험 조건을 결정하는 기법이다. 본 논문에서는 Olsen 및 Ruff-IV 기법과 무차원 Weber 수를 일치시켜 속도를 계산하는 방법을 적용하여 연구자들이 쉽게 이용할 수 있도록 스케일링 프로그램을 개발하였다. 동일조건에서 수행된 NASA 스케일링 결과와 비교하여 프로그램을 검증하였다. 또한 FAR Part 25 Appendix C를 적용한 스케일링 사례를 제시하고 결빙코드 FENSAP-ICE를 이용하여 스케일링 기법을 검증하였다.

• 전력전자학회논문지
• /
• 제10권2호
• /
• pp.194-202
• /
• 2005

본 연구는 새로운 AC PDP(Plasma Display Panel)용 멀티레벨 에너지 회수회로에 관한 연구로서, 기존 멀티레벨 구동회로의 장점을 그대로 유지하면서 문제점을 해결한 새로운 멀티레벨 구동회로를 제안한다. 기존의 멀티레벨 구동회로는 Weber회로의 하드스위칭 문제를 개선하였지만 공진 인덕터에 기생공진전류가 존재하고 Vs/2유지구간이 존재한다. 제안한 회로는 기존 회로에 비해 인덕터의 수를 반으로 줄여 회로를 간단히 하고 공진 인덕터의 기생 공진전류와 Vs/2유지구간을 제거하였으며 CIM(Current Injection Method)을 사용하여 하드스위칭 문제를 해결하였다. 또한 풀브리지 구동회로에 직렬 연결된 스위칭 소자에 NPC(Neutral Point Clamping)기법을 적용하여 각 스위칭 소자에 전압이 균등하게 분배되도록 하였다. 그리고 제안회로의 동작을 모드별로 해석하였으며, PSpice 프로그램으로 시뮬레이션하고 회로를 구성하여 실험함으로써 제안한 회로의 유용성을 입증하였다.

• 한국분무공학회지
• /
• 제25권3호
• /
• pp.103-110
• /
• 2020

In this study, the behavior of water droplet impacting on a thin horizontal wire was visualized by time-delay photography. The impact behavior modes, critical capture speed and trapped mass were analyzed by changing the droplet size, velocity, wire diameter and eccentricity ratio. As the Weber number increased, the hanging, merging, and splitting modes appeared sequentially for the case of central impact, and the hanging and non-splitting modes appeared for the case of off-center impact. The boundary We number of each mode was affected by the diameter ratio. The critical capture speed was affected much by the degree of eccentricity. For all diameter ratios, it was higher for the case of central impact than for off-center impact. The trapped mass was larger for the case of central impact than for off-center impact and it increased with the smaller We number and the larger diameter ratio.

• 경영과학
• /
• 제28권3호
• /
• pp.95-112
• /
• 2011

The Internet has generated a number of online review sites where dissatisfied consumers can easily articulate their opinions and comments on products or services. Little attention, however, has been directed to investigating the relationship between negative electronic word-of-mouth (eWOM) and its critical determinants that affect consumers' purchasing behaviors. This study attempts to explore the influence of the key determinants of consumers' negative eWOM behaviors, including their social relationships online. The results show that tie strength is positively associated with the proposed determinants, such as information credibility, external search efforts, and product involvement. Further, we find that perceived risk plays a mediating role in the relationship between consumers' intention to spread eWOM and its key determinants.

• 한국분무공학회지
• /
• 제23권3호
• /
• pp.109-113
• /
• 2018

The critical heat flux of spray cooling were measured on the test surface of 10 mm diameter made by stainless steel. The experiments were carried out for the droplet-flow-rate of $0.00002{\sim}0.003m^3/(m^2s)$ and liquid subcooling temperature of $40{\sim}75^{\circ}C$. Experimental results showed that the critical heat flux of spray cooling increased remarkably with the increase of droplet-flow-rate. Meanwhile, the effect of liquid subcooling on critical heat flux of spray cooling appeared weakly under the present experimental conditions. In additions, correlation between the dimensionless critical heat flux and Weber number based on droplet-floe-rate was developed for experimental results.

• 한국전산유체공학회지
• /
• 제11권3호
• /
• pp.14-21
• /
• 2006

A numerical simulation of the binary collision dynamics of water drops for size ratios of 1 and 0.75, for the Weber number range of 5 to 100, and for all impact parameter is reported. Two different types of separating collisions, namely reflexive and stretching separations, are identified. A numerical method is based on a fractional-step method with a finite volume formulation and the interface is tracked with Volume of Fluid(VOF) method, including surface tension. Numerical results for size ratios 1 and 0.75 are reasonablely compared with Ashgriz and Poo's experimental results.

• Bulletin of the Korean Chemical Society
• /
• 제32권6호
• /
• pp.2027-2031
• /
• 2011

Molecular dynamics simulation is used to study the binary collisions of nanometer-sized droplets of argon in the presence of a surrounding gas. By systematically varying the droplet size, the impact parameter and the velocity of collision, the outcome of such collisions were examined and they can be classified into coalescence, separation and shattering. If one of the colliding droplets is half or less than the other in diameter, a shattering is not possible to occur. The threshold of impact parameter for a given separation was studied by adjusting the Weber number. Overall nanoscale droplets were more likely to coalesce than the macroscopic sized ones due to their high surface-to-volume ratio.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2005년도 제25회 추계학술대회논문집
• /
• pp.384-394
• /
• 2005

Important characteristics of impinging sprays intersected by a strongly convective gaseous cross flows were experimentally investigated. The breakup processes due to different Weber and Reynolds numbers of liquid and gas streams were visually examined with quantitative measurements of breakup lengths, penetration heights, and droplet sizes. Snapshot images and spay data evidenced that, at lower jet Reynolds number the breakup processes portrays the atomization profiles similar to typical column breakup of single orifice jet. At higher jet Reynolds numbers, disintegration of jet stream is significantly expedited by strong momentum transported from strongly convective gaseous stream. The breakup length and penetration height decreased as the convective flow increase. From the bottom the wall up, the SMD measured the centerline increase. The maximum SMD appeared the top of the SMD distribution

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2005년도 제25회 추계학술대회논문집
• /
• pp.395-406
• /
• 2005

Important characteristics of swirl sprays intersected by a strongly convective gaseous cross flows were experimentally investigated. The breakup processes due to different Weber and Reynolds numbers of liquid and gas streams were visually examined with quantitative measurements of breakup lengths, penetration heights, and droplet sizes. Snapshot images and spray data evidenced that, at lower jet Reynolds number the breakup processes portrays the atomization profiles similar to typical column breakup of single orifice jet. At higher jet Reynolds numbers, disintegration of jet stream is significantly expedited by strong momentum transported from strongly convective gaseous stream. The breakup length and penetration height decreased as the convective flow increase. From the bottom the wall up, the SMD measured the centerline first increases and then decreases before again increasing.

• 한국분무공학회지
• /
• 제1권4호
• /
• pp.24-31
• /
• 1996

This study addresses the behavior characteristics of diesel spray injected on the impinging disk with the room temperature. The models of impinging spray are the stick, the reflect and the wall jet model In the initiative of the fuel injection the impinging spray was the reflect model. because the momentum of droplets was very large. This model developed to the wall jet model according to the time approaches. On the low temperature disk the fuel film was made by the attachment of the droplets with low Weber number. The thickness of impinging spray was increased when the disk approached to the nozzle tip. Mathematical analysis for calculation with the behavior of impinging spray have to consider the reflecting effect and the influence of the fuel film.