• Journal of Navigation and Port Research
• /
• v.30 no.6 s.112
• /
• pp.439-446
• /
• 2006

In ship structures many of the structural plates have cutouts, for example, at inner bottom structure, girder, upper deck hatch, floor and dia-frame etc. In the case where a plate has a cutout it experiences reduced buckling and ultimate strength and at the same time the in-plane stress under compressive load produced by hull girder bending will be redistributed In general, actual ship structure adopted reinforcement of stiffener around the cutout in order to preventing from buckling so it need to examine a buckling and ultimate strength behaviour considering a cutout because In many ship yards used class rule for calculating buckling strength but it is difficult to evaluate perforate stiffened plate with random size. In the present paper, we investigated several kinds of perforated stiffened model from actual ship and then was performed finite element series analysis varying the cutout ratio, web height, thickness and type of cross-section using commercial FEA program(ANSYS) under compressive load.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.12
• /
• pp.71-80
• /
• 2016

Purpose: The aim of this study was to identify sexual experiences and associated factors among middle and high school students in Korea. Methods: Data were analyzed from 74,186 participants who completed the 2012 Korea Youth Risk Behavior Web-based Survey. Descriptive statistics were used to identify the condition of sexual behavior, and a complex sample logistic regression was used to examine the factors related to sexual behavior. Results: Data showed that 4.3% of adolescents had engaged in sexual intercourse (5.9% of males and 2.6% of females). According to the logistic regression analysis for complex samples, the school level, socioeconomic status, experience of part time work, and living with parents, were all factors associated with the decision to engage in sexual intercourse among boys and girls. In particular, sex education in schools was associated with a reduced risk of sexual intercourse. Conclusion: The results of this study highlight the importance of developing a program that focuses on enhancing sex education and promoting refusal and better decision-making skills in order to effectively reduce the likelihood of sexual experience among adolescents in Korea.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.4
• /
• pp.229-238
• /
• 2018

The purpose of this study is to examine the difference in the mediating effects of relief from fatigue through sleep and perceived subjective health in the relationship between perceived stress and subjective happiness in middle school students who attempted suicide. The analysis was conducted using Path analysis, the Bootstrapping method, Phantom variable and Multiple group analysis by AMOSS using the IBM SPSS 23 and IBM SPSS AMOS 23 programs with 820 middle school students who attempted suicide in the past 12 months using the raw data of the Korea Risk Behavior Web-Based Survey (2016). In the relationship between perceived stress and perceived subjective health, the indirect effect of relief from fatigue through sleep and perceived subjective health (${\beta}=-.12$, p=.003) was statistically significant. The difference in the magnitude of the two indirect effects was found to be greater for the subjective health status than for relief from fatigue through sleep (difference = .02, p=.028) and the effects were greater for the males (${\beta}=.44$, p <.001) than for the females (${\beta}=.23$, p<.001). Based on the findings, it is necessary to develop and apply an educational program that includes the factors that contribute to improving the happiness of middle school students.

• The KIPS Transactions:PartD
• /
• v.11D no.5
• /
• pp.1063-1072
• /
• 2004

In the ASP(Application Service Provider) business, applications using database sometimes require some data from clients' databases. These days such data are extracted from client database using manual database operations as an EXCEL file and the ASP, once receiving this file, transfers it into the application's database using manual database operations. This paper describes how to deal with data transmitting between the client database and ASP database on the web without using database manual operations for data extraction and insertion. We propose a framework which enables to transmit client data in a systematical way, to match different attribute names of each database for sharing same attribute values, and to avoid exposing information about the network path of client database to the ASP. This approach consists of two steps of data processing. The first is extracting data from client database as XML format by using a downloaded client program from ASP site, the second is uploading and storing the XML file into the ASP database. The implemented prototype system shows the suggested data integration paradigm is valid and ASP business needing integration of client database can be activated using it.

• 한국태양에너지학회:학술대회논문집
• /
• 2008.11a
• /
• pp.202-207
• /
• 2008

Measures for coping with energy shortage are being sought all over the world. Following such a phenomenon, effort to use less energy in the design of buildings and equipment are being conducted. In particular, a program to evaluate the performance of a building comes into the spotlight. However. indispensable standard wether data to estimate the exact energy consumption of a building is currently unprepared. Thus, after appling standard weather data for four weather factors which were used in previous researches to Visual DOE 4.0, we compared it with the result of the existing data and evaluated them. For the monthly cooling and heating load of our target building, we used revised data for June, July, August, and September during which cooling load is applied. When not the existing data but the revised data was used, the research shows that an average of 14.9% increased in June, August, and September except for July. Also, in a case of heating load, the result by the revised data shows a reduction of an average of 11.9% from October to April during which heating load is applied. In particular, the heating loads of all months for which the revised data was used were more low than those of the existing data. In the maximum cooling and heating load according to load factors, the loads by residents and illumination for which the revised data was used were the same as those of the existing data, but the maximum cooling loads used by the two data have a difference in structures such as walls and roofs. Through the above results, the research cannot clearly grasp which weather data influences the cooling and heating load of a building. However, in the maximum loads by the change of weather data in four factors (dry-bulb temperature, web-bulb temperature, cloud amount, and wind speed) among 14 weather factors, the research shows that 5.95% in cooling load and 27.56% in heating load increased, and these results cannot be ignored. In order to make weather data for Performing energy performance evaluation for future buildings, the flow of weather data for the Present and past should be obviously grasped.

• Journal of Korean Society of Steel Construction
• /
• v.20 no.2
• /
• pp.237-246
• /
• 2008

The cross-sections of continuous multi-span beams sometimes suddenly increase, or become stepped, at the interior supports of continuous beams to resist high negative moments. The three-dimensional finite-element program ABAQUS (2006) was used to analytically investigate the inelastic lateral-torsional buckling behavior of stepped beams subjected to pure bending moment and resulted in the development of design equations. The flanges of the smaller cross-section were fixed at 30.48 by 2.54 cm, whereas the width and/or thickness of the flanges of the larger cross-section varied. The web thickness and height of beam was kept at 1.65 cm and 88.9 cm, respectively. The ratios of the flange thickness, flange width, and stepped length of beams are considered analytical parameters. Two groups of 27 cases and 35 cases, respectively, were analyzed for double and single stepped beams. The combined effects of residual stresses and geometrical imperfection on inelastic lateral-torsional buckling of beams are considered. First, the distributions of residual stress of the cross-section is same as shown in Pi, etc (1995), and the initial geometric imperfection of the beam is set by central displacement equal to 0.1% of the unbraced length of beam. The new proposed equations definitely improve current design methods for the inelastic LTB problem and increase efficiency in building and bridge design. The proposed solutions can be easily used to develop new design equation for inelastic LTB resistance of stepped beams subjected to general loading condition such as a concentrated load, a series of concentrated loads or uniformly distributed load.

• Journal of the Korean Geographical Society
• /
• v.39 no.4
• /
• pp.665-682
• /
• 2004

GIS is considered as a big industry or business in the field of applied sciences. Recently GIS market in Korea is growing rapidly for LBS, Telematics, Web-geographic information services. This paper attempts to focus on the interrelationship between GIS and geography, and the question of how geography emerged out of intellectual trends within GIS to examine possible contribution of geographers in GIS fields. The application of GIS appears to be largely technical in nature. It is important for the GIS operator and the consumer of GIS products to be aware of the geographical concepts that underpin GIS operations. Also it is seen that many departments of geography in Korea have attempted to actively adopt GIS into their education program, with aim to improve the status. GIS has promoted a shift towards applied geography from academic geography. GIS researchers and educators in geography are concerned not with technology, but with the basic concepts and the issues relating to its use, in comparison with other academic fields. It is the responsibility of geography community to make sure that our students receive a geographical education that includes problem-solving, critical thinking and technical capabilities. It is concluded that promoting GIS technology in geography curriculum is essential for the further expansion of geography within GIS and also for the survival of geography.

• Journal of Korean Home Economics Education Association
• /
• v.16 no.3
• /
• pp.63-80
• /
• 2004

The purpose of this study was to investigate the actual ICT utilization and recognition, to identify the effective and relevant chapters of home economics which can be taught using ICT in teaching and learning method. There were 372 secondary school teachers being participated in the survey. The results of this study can be summarized as follows 1. The reason why they have ICT utilization Instruction is to help the learners improve the academic accomplishment in the development stage through providing data from web-surfing and presentational data such as developed CD, animation and presentations. 2. Regarding ICT utilization capability. teachers have the capability to send and receive E-mail, make a presentation data. practical use of Internet. In addition, the group with less than 10 years experience have a higher capability in information technology. 3. Concerning ICT utilization recognition, this result shows that ICT Instruction is the most effective to motivate learners, and teachers anticipate ICT Instruction would improve the quality of the teaching & learning. 4. The chapter such as 'how to make clothing and recycling'(database). 'the foundation of cooking and its application' (database). 'gender and acquaintance of the opposite sex', 'nutrition of during adolescence' (simulation program) should be the first priority in the development.

• Journal of The Korean Association For Science Education
• /
• v.35 no.3
• /
• pp.431-442
• /
• 2015

SSI instruction can be an effective tool to promote key competencies for future citizens. Our assumption of the study is that applying the concept of collective intelligence in the context of SSI learning would facilitate the learning. Thus, we designed and implemented Collective Intelligence-based SSI instruction over almost a year and observed the effects of the instruction on enhancing students' collaboration, information management, critical thinking, and communication skills. Twenty 9th grade students enrolled in a science-gifted program voluntarily participated. Data was collected by administering a questionnaire to examine the skills before, in the middle of, and after the instruction, and by conducting classroom observations and focus student group interviews. The results indicated some degree of improvement in their targeted skills. First, they experienced the expansion of their thoughts by actively sharing information and ideas using the web platform. Second, they became more flexible and open to different points of views in order to accomplish a common goal. Third, they appreciated having independent time and space to explore their own positions on the issues and to search necessary information, and believed that the process encouraged them to more pro-actively participate and communicate in the group debates. Lastly, they positively perceived the values that collaboration with diverse group members could produce.

• Journal of Korean Medicine Rehabilitation
• /
• v.27 no.3
• /
• pp.61-70
• /
• 2017

Objectives The purpose of this review is to analyse the trend in papers related with Korean Medicine Treatment after musculoskeletal disorder surgery. Methods We reviewed Korean Medicine papers by searching Korean web databases 'Korea Traditional Knowledge Portal', 'Scientific and Technological Information Integration Service (NDSL)', 'Academic Research Information Service (RISS)', 'Korea Medical Informati on Portal (OASIS)'. We classified the papers by the year of publishment, the title of journals, the type of study, surgery region, chief complain after surgery, main treatment, periods after surgery, assessment for outcomes. Results 1. Korean Medicine treatment after musculoskeletal disorder surgery has received more attention than in the past and there are attempts to do various studies besides the case reports. 2. 41 research papers were divided in to 3 original articles, 3 review articles, 35 case reports. But almost presented a low level of evidence. 3. Pain was the most common symptom after the musculoskeletal disorder surgery. Pain should be the primary goal of Korean rehabilitation treatment after musculoskeletal disorder surgery. 4. Assessment tools for outcome were concentrated in questionnaries, VAS and NRS. In order to evaluate better, it is necessary to evaluate the overall condition of the patient such as the quality of life evaluation and patient satisfaction. Conclusions In this study, we expect that the development and clinical application of Korean rehabilitation treatment program after musculoskeletal disorder surgery will be actively pursued.