• 한국가구학회지
• /
• 제21권4호
• /
• pp.284-292
• /
• 2010

This research was carried out to examine the properties of fancy cherry veneer overlaid on the PF resin bonded Meranti plywood floor, which 2.5% green tea leaf powder was applied in the UV varnishes and the adhesives for scavenging the volatile organic compounds. The results were as follows: 1. The various properties of the treated samples, such as density, moisture content, thickness swelling, bending strength(MOR), adhesion shear strength, surface abrasion, curling, cyclic delamination test with boiling water, boiling property, cold-resistance and heat resistance, acid resistance and alkali resistance, and anti-contamination property showed no significant difference between the properties of the control samples. 2.5% green tea leaf powder treated floor gave a little better results than the control for surface scratch test. 2. In case of QUV and weathering test, no difference between the treated sample and control was found. 3. The floor was discolored by adding 10% green tea leaf powder to UV coating, and the floor was also discolored to light green during by the soaking test. The color of floor was not changed up to 5% addition level.

• Corrosion Science and Technology
• /
• 제2권4호
• /
• pp.183-188
• /
• 2003

Corrosion of carbon and weathering steels were evaluated under 3 environmental exposures in Thailand (urban, rural and marine) for a year. The seasonal study was designed to determine different corrosion mechanisms by 6 months of dry season and 6 months of rainy season in a year. The sheltered exposure racks were used to determine the washing effect of min. At each site, climatic and pollutants analyses were carried out. The present study showed that the difference in corrosion rates of carbon and weathering steels was not so distinguished in both rural (AIT) and urban (TISTR) environments. The corrosion rate of weathering steel was somewhat lower than that of carbon steel and the decreasing tendency of corrosion rate with time was slightly higher for weathering steel than for carbon steel. In marine (Rayong) environment, the corrosion rate was higher and the effect of wet and dry seasons was observed. The corrosion rate in 6 dry months was higher for direct exposure than for sheltered exposure. However, in 6 rainy months. the corrosion rate of sheltered exposure was higher than that of direct exposure. In direct exposure for I year, that is, the first 6 dry months and the next 6 rainy months, the corrosion rate decreased with time. but in sheltered exposure, the corrosion rate did not decrease with time. instead, increased in the next 6 rainy months. This indicated that the protect ive layer formed in the first 6 dry months could be destroyed by high deposition of chloride to r sheltered exposure in the next 6 rainy months; whereas the rust layer for direct exposure could be kept sound due to washing effect in rainy season, even though the deposition rate of chloride was almost the same for direct and sheltered exposures. In marine environment, the weathering steel showed higher corrosion resistance than carbon steel but its corrosion rate was higher than those in other environments.

• 보존과학회지
• /
• 제17권
• /
• pp.19-32
• /
• 2005

전통목조건축물의 단청에서 발생하는 도막의 박리현상을 개선시키기 위해, 목재의 친수성으로 인해 목재와 도막간의 팽윤수축률의 차이에 의해 발생되는 응력이 도막의 내후성에 미치는 영향을, 도막의 기계적 성질(인장성질과 응력완화)과 교착제(아교, 아크릴에멀젼(Primal AC-3444), 아크릴수지 (Paraloid B-72))에 의한 포수방법으로부터 평가하였다. 아크릴에멀젼 도막은, 아크릴에멀젼의 유리전이온도가 상온 이하$(7^{\circ}C)$로써 외력에 대한 응력완화가 큰 성질을 가지고 있기 때문에, 열화촉진실험과 옥외폭로실험에서 박리가 발생하지 않았으며, 다른 교착제를 사용한 도막에 비해 내후성이 가장 뛰어났다. 또 목재에 교착제를 저농도에서 고농도까지 중복칠하는 포수방법이 다른 포수방법들보다 도막의 내후성을 향상시키는 효과가 있었다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2005년도 춘계학술발표대회 개요집
• /
• pp.200-201
• /
• 2005

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.611-618
• /
• 2005

In this research, the effect of rock mass weathering on the side shear resistance of drilled shaft socketed into weathered rock was investigated. For that, a database of 23 cast-in-place concrete piles with diameters varying from 400mm to 1,500mm were socketed into weathered igneous/meta-igneous rock at four different sites. The static axial load tests were performed to examine the resistant behavior of the piles, and a comprehensive field/laboratory testing program at the field test site was also performed to describe the in situ rock mass conditions quantitatively. No correlation was found between the compressive strengths of intact rock and the side shear resistance of weathered/soft rock. The ground investigation data regarding the rock mass conditions (e.g. $E_m,\;E_{ur},\;_{plm}$, RMR, RQD, j) was found to be highly correlated with the side shear resistance, showing the coefficients of correlation greater than 0.7 in most cases. Additionally, the applicability of existing methods for the side shear resistance of piles in rock was verified by comparison with the field test data. The existing empirical relations between the compressive strength of intact rock and the side shear resistance(Horvath (1982), Rowe & Armitage(1987) etc.) appeared to overestimated the side shear resistance of all piles tested in this research unless additional consideration on the effect of rock mass weathering or fracturing was applied. The existing methods which consider the effect of rock mass condition were modified and/or extended for weathered rock mass where mass factor j is lower than 0.1, and RQD is below 50%.

• 한국표면공학회지
• /
• 제47권2호
• /
• pp.57-62
• /
• 2014

The biogas holder is composed of an outer membrane and an inner membrane which are subject to outdoor exposure and gas exposure respectively. The influence of weathering conditions on the photo-degradation of a biogas holder was investigated. Tests were performed under three different methods - outdoor exposure tests (Seosan, Arizona), accelerated tests (Xenon-are lamp) with the outer-membrane of biogas. Moreover, the changes in the aging process were monitored using color difference, gloss, the contact angle and an optical microscope. Changes in physical properties, such as decrease reduction in gloss, decrease in the contact angle, increase in color difference were observed in the aging process. The comparison between membrane 3B, 4B and membrane 5B under xenon-arc were discussed. Membrane 5B was very sensitive to ultraviolet (UV) ray. There were many difficulties in the outdoor exposure test due to acid rain, dust, and stain resistance.

• 지질공학
• /
• 제34권1호
• /
• pp.67-105
• /
• 2024

This study compares the quartzites of four quartzite units: The Fagfog Quartzite, Dunga Quartzite (member of the Robang Formation), Pandrang Quartzite (member of the Kalitar Formation) and the Chisapani Quartzite. The analysis shows variations in flakiness and elongation, as the Fagfog Quartzite displays low flakiness whereas the Pandrang and the Chisapani have moderate and the Dunga Quartzite has shown variations. The density values of the four quartzite units remain consistent, indicating uniform physical properties and porosity levels. However, bulk density values differ among the quartzites, suggesting variations in particle arrangement, porosity, and density. Regarding strength measures, the Pandrang and the Chisapani Quartzite have higher strength characteristics as compared to the Fagfog and the Dunga Quartzites. The Pandrang Quartzite has the highest average point load strength index, classifying it as "Extremely Strong". The resistance to impact and crushing forces varies among the quartzites, with lower Aggregate Impact Value (AIV) and Aggregate Crushing Value (ACV) indicating higher strength and durability. Durability tests show that the Fagfog Quartzite has high durability against slaking, with a slight decrease observed after the fifth cycle. The Dunga Quartzite shows varying degrees of weathering, while the Pandrang and the Chisapani Quartzite have minimal weight changes, indicating strong resistance to weathering. Magnesium sulfate soundness tests indicate high durability and resistance to degradation for all four units. The Los Angeles abrasion value (LAAV) tests indicate favorable resistance to abrasion for the majority of the Fagfog, Dunga, and the Pandrang Quartzites samples, while Chisapani Quartzite shows more variability in LAAV values. The Pandrang Quartzite shows a higher proportion of elongated particles but lower flakiness index values as compared to Fagfog and Dunga Quartzites while Chisapani Quartzite stands out with a significantly higher presence of flaky particles and lower elongation index values. Mechanically, the Fagfog and Dunga Quartzite show higher strength and better resistance to abrasion and freeze and thaw. The Pandrang Quartzite shows moderate resistance to crushing and sudden effect, while the Chisapani Quartzite has variable resistance to effect. This comparative study emphasizes the diversity and complexity of quartzite rock types, showing the need for comprehensive characterization and assessment to determine their suitability for specific applications.

• 한국지반공학회지:지반
• /
• 제14권5호
• /
• pp.53-66
• /
• 1998

풍화토는 암석이 풍화되어 생성되기 때문에 모암과 풍화과정에 따라 그 특성이 결정된다. 따라서, 풍화토의 특성을 고찰하기 위해서는 먼저 모암에 대한 고찰과 풍화과정을 지배하는 풍화환경에 대한 고찰이 이루어져야 한다. 이번 연구에서는 모암과 풍화정도에 따른 풍화의 특성을 고찰하기 위해 화강암 풍화토와 편마암 풍과토를 불교란 또는 교란상태로 채취한 후. 기본 물성시험, 암석학적 시험 그리고 다양한 전단시험을 실시하였다. 여러 가지 시험의 결과에서 암석의 풍화는 모암의 조암광물 분포 및 생성특성과 밀접한 관계가 있음을 확인하였다. 화강암 풍화토의 경우 모암의 비방향적인 성격 때문에 현장응력 상태화 전단특성이 등방적으로 나타났으며, 편마암 풍과토는 그 내부에 존재하는 불연속면이 역학적 거동을 지배하는 방향적 특성을 갖는 것으로 나타났다. 또한 식영이 장석 또는 운모보다 풍화저항력이 크다는 사실의 확인과 함께 풍화대의 두께가 구성 조암광물에 크게 영향을 받는다는 결론을 얻었다.

• 한국지형학회지
• /
• 제21권4호
• /
• pp.19-40
• /
• 2014

전라북도 고창군 상하면의 가막도에 대한 지형 조사의 일환으로 암석 반발 강도 조사와 각 부분의 화학적 조성을 분석하였다. 가막도의 암체 최상부는 지중 풍화 기원인 핵석이 일부 나타나고 있으며, 그보다 고도가 낮은 부분엔 지중에서 풍화 전선을 형성하던 기반암이 노출되어 있다. 가막도 암체의 반발 강도는 암체의 정상부에서 해안 대지 쪽으로 가면서 증가하는 것으로 나타났다. 이는 정상부가 침식에 대한 저항 정도가 약한 것으로 볼 수 있다. 한편 암체 각 부분의 화학적 풍화 지수, 풍화각 조성 물질의 변화 등으로 볼 때 암체의 하부가 정상부에 비하여 화학적 풍화가 덜 진행된 것으로 나타났다. 하지만 이는 암체 상부의 표면부에서 나타나는 현상으로 풍화층이 제거될 경우 생경한 암석의 풍화대가 나타날 것으로 보인다. 풍화각에 발달한 다각형 균열의 경우 전반적으로 화학적 조성과 화학적 풍화 정도에서 정상부와 하부의 중간 정도의 수준이었다. 풍화각의 특성을 파악하기 위한 분석 결과 풍화각의 표면에 다각형 균열이 형성되는 경우, 표면 부분에 비하여 기저 부분이 화학적 풍화 지수가 높은 경향성이 나타났다. 이는 이전의 연구와 일치하나, SiO2의 함량 등은 이전의 연구와 일치하지 않는 것으로 나타났으며, 이는 풍화 환경과 기반암 조성의 차이에 의한 것으로 판단된다. 이들을 종합할 때 가막도는 풍화 산물이 제거된 풍화 전선의 잔류물로 하부의 풍화 산물제거가 상부보다 활발히 진행된 것으로 보인다.

• Journal of the Korean Wood Science and Technology
• /
• 제34권5호
• /
• pp.88-97
• /
• 2006

Wood flour (WF)-recycled polypropylene (RPP) composites composed of 50% WF of Eucalyptus deglupta Blume species, 50% RPP, various contents of maleic anhydride (MAH) modifier (0; 1; 2; 5; 5; 7.5; and lo%), and 15% dicumyl peroxide (DCP) initiator (based on MAH weight) were subjected to weather for 1 year and subterranean termite (Coptotermes cuwignathus HOLMGREN) and dry wood termite (Cryptotermes cynocephalus LIGHT) for 3 and 4 weeks, respectively. WF-RPP composites with 2.5% MA modifier had tensile strength, breaking elongation and Young's modulus about 2.2, 2.3, and 1.2 times, respectively higher compared to MAH-free composites. The WF-RPP composites with or without MAH modifier had 5.5 times higher resistance to weather compared to RPP film alone. The color of the WF-RPP composites with or without MAH modifier became lighter after exposures to the weather. The WF-RPP composites with or without MAH modifier are resistant to subterranean termite Coptotermes curvignathus HOLMGREN and dry wood termite Cryptotermecs cynocephalus LIGHT under the experimental condition adopted.