• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.4
• /
• pp.724-729
• /
• 2008

In the case of 'MAEMI', the Typhoon which formed in September, 2003, the largest-scale damage of tidal wave was caused by the co-occurrence of Typhoon surge and full tide. Until now Korea has been focusing on the calculating the amount of damage and its restoration to cope with these sea and harbor disasters. It is essential to establish some systematic counterplans to diminish such damages of large-scale tidal invasion on coastal lowlands considering the recent weather conditions of growing scale of typhoons. Therefore, the purpose of this research is to make the counterplans for prevention against disasters fulfilled effectively based on the data conducted by comparing and analyzing the accuracy between observation values and the results of estimating the greatest overflow area according to abnormal tidal levels centered on Masan area where there was the severest damage from tidal wave at that time. It's necessary utilize data like high-resolution satellite image and LiDAR(etc.) for correct analysis data considering geographical characteristics of dangerous area from the storm surge. And we must make a solution to minimize the damage by making data of dangerous section of flood into GIS Database using those data (as stated above) and drawing correcter damage function.

• Korean Journal of Remote Sensing
• /
• v.25 no.6
• /
• pp.475-486
• /
• 2009

Harmful algal blooms (HAB) caused by the dominant species Cochlodinium polykrikoides (C. polykrikoides) appear in the South Sea of Korea and are particularly present in summer and fall seasons. Environmental factors such as water temperature, weather conditions (air temperature, cloud cover, sunshine, precipitation and wind) influence on the initiation and subsequent development of HAB. The purpose of this research was to study spatial and temporal variations of HAB in the Yeosu area using environmental (oceanic and meteorological) and satellite data. Chlorophyll-a concentrations were calculated using Sea-viewing Wide Field-of-view Sensor (SeaWiFS) images by an Ocean Chlorophyll 4 (OC4) algorithm, and HAB were estimated using the Red tide index Chlorophyll Algorithm (RCA). We also used the surface velocity of sequential satellite images applying the Maximum Cross Correlation method to detect chlorophyll-a movement. The results showed that the water temperature during HAB occurrences in August 2002-2008 was $19.4-30.2^{\circ}C$. In terms of the frequency of the mean of cell density of C. polykrikoides, the cell density of the HAB found at low (<300 cells/ml), medium (300-1000 cells/ml), and high (>1000 cells/ml) levels were 27.01%, 37.44%, and 35.55%, respectively. Meteorological data for 2002-2008 showed that the mean air temperature, precipitation, wind speed and direction, and sunshine duration were $22.39^{\circ}C$, 6.54 mm/day, 3.98 m/s (southwesterly), and 1-11.7 h, respectively. Our results suggest that HAB events in the Yeosu area can be triggered and extended by heavy precipitation and massive movement of HAB from the East China Sea. Satellite images data from July to October 2002-2006 showed that the OC4 algorithm generally estimated high chlorophyll-a concentration ($2-20\;mg/m^3$) throughout the coastal area, whereas the RCA estimated concentrations at $2-10\;mg/m^3$. The surface velocity of chlorophyll-a movement from sequential satellite images revealed the same patterns in the direction of the Tsushima Warm Current.

• Korean Journal of Remote Sensing
• /
• v.35 no.5_1
• /
• pp.737-750
• /
• 2019

Information of target changes in inaccessible areas is very important in terms of national security. Fast and accurate change detection of targets is very important to respond quickly. Spaceborne synthetic aperture radar can acquire images with high accuracy regardless of weather conditions and solar altitude. With the recent increase in the number of SAR satellites, it is possible to acquire images with less than one day temporal resolution for the same area. This advantage greatly increases the availability of change detection for inaccessible areas. Commonly available information in satellite SAR is amplitude and phase information, and change detection techniques have been developed based on each technology. Those are amplitude Change Detection (ACD), Coherence Change Detection (CCD). Each algorithm differs in the preprocessing process for accurate automatic classification technique according to the difference of information characteristics and the final detection result of each algorithm. Therefore, by analyzing the academic research trends for ACD and CCD, each technologies can be complemented. The goal of this paper is identifying current issues of SAR change detection techniques by collecting research papers. This study would help to find the prerequisites for SAR change detection and use it to conduct periodic detection research on inaccessible areas.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.12
• /
• pp.1854-1863
• /
• 2019

Objective: To effectively use corn stover resources as animal feed, we explored the chemical composition and in vitro digestibility of corn stover during field exposure and the fermentation characteristics of silage prepared with lactic acid bacteria (LAB) and cellulase. Methods: Corn ears including the cobs and shucks were harvested at the ripe stage. The corn stover was exposed in the field under natural weather conditions. Silages were prepared after 0, 2, 4, 7, 15, 30, and 60 d of exposure. Corn stover was chopped into approximately 1 to 2 cm lengths and then packed into 5 liter plastic silos. The ensiling density was $550.1{\pm}20.0g/L$ of fresh matter, and the silos were kept at room temperature ($10^{\circ}C$ to $25^{\circ}C$). Silage treatments were designed as follows: without additives (control), with LAB, with cellulase, and with LAB+ cellulase. After 45 d of fermentation, the silos were opened for chemical composition, fermentation quality and in vitro digestion analyses. Results: After harvest, corn stover contained 78.19% moisture, 9.01% crude protein (CP) and 64.54% neutral detergent fiber (NDF) on a dry matter (DM) basis. During field exposure, the DM, NDF, and acid detergent fiber (ADF) contents of corn stover increased, whereas the CP and water-soluble carbohydrate contents and in vitro digestibility of the DM and CP decreased (p<0.05). Compared to the control silage, cellulase-treated silage had lower (p<0.05) NDF and ADF contents. The pH values were lower in silage treated with LAB, cellulase, or LAB+cellulase, and lactic acid contents were higher (p<0.05) than those of the control. Silage treated with cellulase or LAB+cellulase improved (p<0.05) the in vitro DM digestibility (IVDMD) compared to that of the control or LAB-treated silage. Conclusion: Corn stover silage should be prepared using fresh materials since stover nutrients are lost during field exposure, and LAB and cellulase can improve silage fermentation and IVDMD.

• Korean Journal of Soil Science and Fertilizer
• /
• v.13 no.4
• /
• pp.107-113
• /
• 1981

In order to investigate effects of fertilization on the yield of chestnut trees and to compare the compound fertilizer (CF) and Boron contained compound fertilizers (BCF) for chestnut trees developed by Chosun Fertilizer Inc. with single fertilizers (SF) at different fertilizing levels, a field experiment was conducted during the 1979 and 1980 growing periods. The results were summarized as follows: 1. The growth of chestnut trees was markedly improved as increasing the amount of fertilizers regardless of the SF, CF or BCF. 2. The number of strobiles increased as increased amount of fertilizers, and the ratio of dropped strobiles decreased by more than 90 percent by the BCF application while that decreased by 12 to 47 percents by the SF or CF applications. It implies that the boron application be necessary for increasing strobiles and reducing the ratio of dropped strobiles. 3. The yield increments by the SF or CF applications at the standard level were 80 percent and that by the BCF application at the same level was 202 percent and the highest yield increment was recorded as high as 302 percent by the BCF application at the doubled level in 1979. The yield response in 1980 was similar to that in 1979; however, the yields were lower than in 1979 due to the abnormal weather conditions such as low temperature and low solar radiation during summer except BCF applicated treatments where the yields were outstandingly increased. 4. The BCF developed proved as a recommendable compound fertilizer for chestnut trees.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.6
• /
• pp.708-720
• /
• 2021

As hypoxia adversely affects the marine environment in northwestern Gamak Bay every summer, the present study determined its comprehensive occurrence mechanisms using the Multiple Regression Analysis (MRA) and suggested management directions based on the primary MRA factors. The first hypoxia occurred by thermocline related to weather conditions, with organic matter deposited inside the bay on 26^th June, 2017. Additionally, on 12^th July, halocline was also developed by increased rainfall, and the hypoxia was most expanded horizontally and vertically. The primary factors were the stratification and deposited organic matter. In contrast, the hypoxia correlated to phytoplankton growth and deposited organic matter on 8^th August was diminished with remarkably less precipitation. However, the stable halocline was caused by massive precipitation, and the reproduced phytoplankton re-generated the expanded hypoxia on 16^th August despite a short sampling interval. Subsequently, the hypoxia influenced by the deposited organic matter spread shallowly along the seafloor on 13^th September as the extinction period. These results suggest that stratification alleviation technologies, and the improvement and removal of the organic matter deposited on the surface sediment are necessary.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.6
• /
• pp.731-736
• /
• 2021

Oil fences effectively prevent the spread of oil spilled in the sea, thereby reducing the damage to the marine environment. However, the fence is damaged by oil and structures at the accident site and is discarded. When incinerated disposal method for discarded fences, fine dust, and harmful materials are generated. Moreover, as a part of the damaged fence is dumped into the sea, it may cause secondary environmental pollution, such as microplastics. Therefore, in this study, durability was measured using the most common solid foam type oil fences. As a result, the reduction rate of after five days of contact was 13 % in seawater and 3 % in oil, affected by temperature changes. Thus, the durability of the fence should be improved because it is exposed to seawater and oil and affected by wind, light, and waves depending on the weather conditions. Therefore, we suggest a method to improve the oil fence inspection to strengthen the durability of the fence's fabric part.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.41 no.3
• /
• pp.205-209
• /
• 2021

Barnyard millet (Echinochloa esculenta) can be processed through soiling, hay, and silage, depending on the weather conditions during harvesting. However, research on barnyard millet is insufficient, and standards for cultivar, seeding density, and fertilizers have not been established. This study was conducted to examine the effects of seeding density and seeding methods on dry matter yields. For this, we used the early-maturing (Shirohie millet) variety of the barnyard millet. The experimental design included different seeding density (10 kg/ha, 15 kg/ha, 20 kg/ha (standard seeding density), 25 kg/ha and 30 kg/ha), and different methods of seeding (drill seeding and broadcast seeding). The seeding date was May 13, 2021, and the harvest date was July 13, 2021. Harvesting was carried out when the heading reached 40 %. Lodging occurred at 5, 9 and 7 at 20, 25 and 30 kg/ha densities in the broadcast seeding, but not in the drill seeding. With decreasing density of seeding, tillage number showed an increasing trend in both drill seeding and broadcast seeding (p>0.05). The plant heights were comparable in both drill seeding and broadcast seeding (p>0.05). The heading stage of barnyard millet was checked July 7 for drill seeding, and, on July 8 for broadcast seeding. It took 62 days, i.e., till July 13 for the heading to reach 40 % of the output. The dry matter yield of barnyard millet was significantly higher at the seeding density of 30 kg/ha, for both the methods of seeding (p<0.05). There was no difference in the chemical composition of grain, based on the seeding method and seeding density. However, as the seeding density increased, the CP, NDF, ADF, and TDN contents increased in both drill seeding and broadcast seeding. We found that, the dry matter content was the highest at the seeding density of 30 kg/ha for both the methods of seeding, but this was only 1.3 times higher than that of 10 kg/ha. Considering the seed price and labor force involved in seeding, it is advisable to have a seeding density of 15-20 kg/ha.

• Journal of Life Science
• /
• v.31 no.4
• /
• pp.377-384
• /
• 2021

Researching the soil fungal community is important to understand the interaction between fungi and living plants. However, too few studies have examined the soil fungal community and their interactions with plants. Rhododendron mucronulatum, commonly known as Korean rosebay, is an important forest resource that has aesthetic, ecological, and potential pharmacological values. We used a pyrosequencing method to analyze the characteristics of fungal communities from R. mucronulatum soil samples from Biseul mountain county park, which is one of the famous places for large R. mucronulatum colonies in South Korea. We collected soil core samples in February and August at three sites in the Biseul Mountain County Park, taking into consideration the regional and seasonal conditions. We obtained 454,157 validated reads after pyrosequencing all six samples. The fungal communities from the first observation spot in August had the richest species diversity among the samples. Basidiomycota, Ascomycota, and Mortierellomycota were major phyla in the samples. Agaricales_f, Mortierellaceae, and Clavariaceae were major families in the samples. The genus Mortierella was the most dominant in all six samples. Overall, 19 genera could be associated with R. mucronulatum. Sample 1 had 109 genera in sample 1, sample 2 had 111 genera, and sample 3 had 112 genera that were uniquely identified. The samples collected in August had 28 identified genera, that existed only in summer samples, indicating a weather effect. This study can be used as basic research to understand the relationship between soil fungi and plants.

• Korean Journal of Remote Sensing
• /
• v.37 no.6_1
• /
• pp.1507-1515
• /
• 2021

If chlorophyll-a is estimated through ocean color remote sensing, it is able to understand the global distribution of phytoplankton and primary production. However, there are missing data in the ocean color observed from the satellites due to the clouds or weather conditions. In thisstudy, the missing data of the GOCI (Geostationary Ocean Color Imager) chlorophyll-a product wasreconstructed by using DINEOF (Data INterpolation Empirical Orthogonal Functions). DINEOF reconstructs the missing data based on spatio-temporal data, and the accuracy was cross-verified by removing a part of the GOCI chlorophyll-a image and comparing it with the reconstructed image. In the study area, the optimal EOF (Empirical Orthogonal Functions) mode for DINEOF wasin 10-13. The temporal and spatialreconstructed data reflected the increasing chlorophyll-a concentration in the afternoon, and the noise of outliers was filtered. Therefore, it is expected that DINEOF is useful to reconstruct the missing images, also it is considered that it is able to use as basic data for monitoring the ocean environment.