• The Research Journal of the Costume Culture
• /
• v.10 no.4
• /
• pp.392-403
• /
• 2002

The purpose of this study was to make clear reduction ratio due to the stretch ratio and to find out the ease for the patterns of stretch skirt according to fat body type to improve the aesthetics and wearing satisfaction. For this study, three college students were selected according to the fat body types; According to fat body types, 15 experimental skirt which were different each other in terms of the amount of ease on wait and hip, were made for the appearance test and wearing satisfaction test. The results from the study were as follows: 1. The results from the appearance test were as follows. For the ease on waist, W+2cm and W+0cm for fat body type were suggested for the best fit. For the ease on hip, H+2cm and H+0cm for fat body type were suggested for the best fit. 2. The results from wearing satisfaction test were as follows. W+2cm, H+2cm for fat body type were suggested for the best wearing satisfaction. 3. Based on the results from the above tests, the pattern reduction ratios for stretch skirt were as follows. pattern reduction ratio 0∼2.4% of waist, 1.9∼3.8% of hip for fat body type, were suggested for the appropriate reduction ratio for stretch skirt. 4. The result from this study for stretch skirt was as follows. For fat body type, W+2cm, W+0cm for waist and H+2cm, H+0cm for hip were appropriate for stretch skirt pattern. Therefore, different ease has to be applied to stretch skirt pattern according to the body parts, to make the skirt looks good, is appropriate for fat body type, and is satisfied with appearance and wearing satisfaction test.

• Fashion & Textile Research Journal
• /
• v.17 no.6
• /
• pp.988-995
• /
• 2015

Gaps between the upper edges of brassiere mold cups and the breasts are one of the most serious issues in realizing comfort wearing of commercial brassieres for small-breasted women. The surplus ease amounts causing the fit problem were measured from 3D wearing images of the small-breasted women's brassieres. The effect after the removing the surplus ease amounts from the upper edge of mold cup was approved by subjective wearing evaluation. Since the volume distribution of mold cup can also affect the wearing sensation of brassiere, the subjective wearing sensation was compared for two brassieres of different volume distributions, V_L, of which volume was concentrated at the lower cup, and V_C, which has the thickest part at the nipple. As the results, the suitable sensation for cup volume and the natural wearing silhouette could be accomplished by removing the surplus ease amounts from the upper edge of mold cup to reduce the gaps between brassieres and the breasts, which could be accomplished through an approach reducing the volume near the upper edge of mold brassiere cup and making the volume concentrated at the lower cup. These works provide a useful information on the design of the brassiere mold cups for small-breasted women. Moreover, modeling methods of 3D scan data and 3D printing technique for making more accurate mold cases used in this research can be helpful to develop and evaluate clothing products in future.

• The Research Journal of the Costume Culture
• /
• v.9 no.4
• /
• pp.652-663
• /
• 2001

The purpose of this study was to make clear reduction ratio due to the stretch ratio and to find out the ease for the patterns of stretch skirt according to the body types to improve the aesthetics and wearing satisfaction. Therefore, fundamental data for aesthetic and functional patternmaking of the stretch skirt can be suggested. The results from the study were as follows: 1. The results from the appearance test were as follows. For the ease on waist, W+0cm and W - lcm for thin body type were suggested for the best fit. For the ease on hip, H+0cm and H-2cm for thin body type were suggested for the best fit. 2. The results from wearing satisfaction test were as fDllows. W+Ocm, H+Ocm for thin body type were suggested for the best wearing satisfaction. 3. Based on the results from the above tests, the pattern reduction ratios for stretch skirt were as follows: pattern reduction ratio 3.3 ∼ 5.0% of waist, 4.8 ∼7.2% of hip for thin body type were suggested for the appropriate reduction ratio for stretch skirt. 4. The result from this study for stretch skirt was as follows: For thin body type, W+0cm, W - lcm for waist and H+0cm, H-2cm for hip were appropriate for stretch skirt pattern. Therefore, different ease has to be applied to stretch skirt pattern according to the body parts, to make the skirt looks good, is appropriate for thin body type, and is satisfied with appearance and wearing satisfaction test.

• The Research Journal of the Costume Culture
• /
• v.9 no.3
• /
• pp.433-446
• /
• 2001

Recently, according to changes in fashion trends, the importance of stretch fabric stands out. A lot of studies on non-stretch woven fabrics have been made, but few studies on stretch fabrics has been made yet. Especially, the study on ease for the patterns, according to body types, of stretch has not been made at all. The purpose of this study was to make clear reduction ratio due to the stretch ratio and to find out the ease for the patterns of stretch skirt according to standard body type to improve the aesthetics and wearing satisfaction. Therefore, fundamental data for aesthetic and functional patternmaking of the stretch skirt can be suggested. The results from the study were as follows: 1. The results from the appearance test were as follows. For the ease on waist, W+0㎝ and W-1㎝ for standard body type were suggested for the best fit. For the ease on hip, H+2㎝ and H+0㎝ for standard body type were suggested for the best wearing best fit. 2. The results from wearing satisfaction test were as follows. W+0㎝, H+2㎝ for standard body type were suggested for the best wearing satisfaction. 3. Based on the results from the above tests, the pattern reduction ratios for stretch skirt were as follows: pattern reduction ratio 3.0∼4.6% of waist, 2.1∼4.3% of hip for standard body type were suggested for the appropriate reduction ratio for stretch skirt. 4. The result from this study for stretch skirt was as follows: For standard body type, W+0㎝, W-1㎝ for waist and H+2㎝, H+0㎝ for hip were appropriate for stretch skirt pattern.

• Fashion & Textile Research Journal
• /
• v.10 no.5
• /
• pp.636-643
• /
• 2008

The purpose of this study was to establish the proper amount of eases according to the body type of men's bodice basic pattern. The 3 subjects in 30's men were selected for developing fitted pattern for each type. And the results of the wearing test for individual subject by distributing ease amount are as follows. The wearing test is administrated by a division of 12cm, 15m, and 18cm areas respectively after separating the fitted pattern for each type in a vertical and horizontal ways. There exists a significant difference in ease according to the measures of chest circumference of subjects. Also, it is shown that the more comfortable in function, the better visible in appearance as the ease gets proper. As to regions, the amount and ratio of ease chest circumference are increased in proportion to the size of the chest circumference. The scye depth is affected by the ease of chest circumference, while the ease of the interscye and the back breadth are lessened due to the effect of their appearances. And the side breadth is required as a buffer to complement the shortage of the interscye and the back breadth because the ease of either the interscye or the back breadth is partially transferred in motion.

• Journal of Korean Society for Quality Management
• /
• v.46 no.2
• /
• pp.301-310
• /
• 2018

Purpose: The purpose of this study is to investigate the effect of work intensity on fit factor and affective quality of the dustproof Background: Among the victims who suffer pneumoconiosis due to the inhalation of toxic substances or the lack of oxygen during the work, the proportion of the victims is larger than the other causes. Wearing a respirator may prevent pneumoconiosis, but it can be hazardous to workers because of the leakage through filters, cartridges, exhaust valves, broken parts, and face-to-face contact. Despite leakage through the contact area between the mask and the face has various causes such as the wearer's activity, sweat accumulation, facial shape, etc., There is a lack of relevant research and regulation compared to developed countries that have already institutionalized the law 30 years ago and give the right to sell through a test Method: The work intensity was adjusted by walking or running at 6km/h and 11km/h on the treadmill, and tasks were defined with reference to the test procedure and the exercise sequence applied in the face leakage test of the dustproof mask. And fit factor was measured objectively using 'Respirator Fit Tester 8038' which measures fit factor calculated by dividing the number of dust present outside the mask by inside the mask. In addition, affective quality was classified by the ease of use, ease of breathing, and ease of wearing, and was measured using the 5-point likert scale questionnaire. Results: There was a significant difference in fit factor, ease of breathing, and wearing convenience according to work intensity and no significant difference in ease of use(${\alpha}=0.01$). And when the work intensity was high, fit factor, ease of breathing, and wearing convenience were all lower than when the work intensity was low. Conclusion: In Korea, it is necessary to consider consideration of the work intensity when testing the leakage rate of the face part for safety certification of the respiratory protective equipment, When developing a mask, it should be possible to maintain high adhesion even under intense, active situation and high temperature conditions by selecting materials, improving the wearing style, and expanding the adjustable range.

• Textile Coloration and Finishing
• /
• v.35 no.2
• /
• pp.107-120
• /
• 2023

The purpose of this study was to analyze the patterns of D level protective clothing, improve their ease of movement by modifying the patterns, and validate the effectiveness of the improvements through 3D virtual fitting and subjective wearing evaluations. Based on previous studies that identified numerous complaints, the patterns of the neck, armpit, and waist areas were modified, resulting in the development of new patterns. To compare and analyze the improved protective clothing with the basic protective clothing, stress and strain were examined after 3D virtual fitting. Additionally, to assess the clothing's allowance, the overall distance between the avatar and the protective clothing, as well as the sectional circumference length and distance of each avatar body part, were measured. Furthermore, the improved protective clothing was manufactured, and a subjective wearing evaluation was conducted with ten males in their twenties as participants. The results showed that the improved protective clothing had evenly distributed stress, larger sectional circumference, and lower average cavity distance. The subjective wearing evaluation also revealed that the suit with improved patterns exhibited superior size suitability, reduced pulling sensation in different body parts, and increased ease of movement. In conclusion, this study confirmed that even minimal pattern modifications can enhance the functionality of protective clothing, alleviating discomfort for wearers.

• Journal of Fashion Business
• /
• v.13 no.3
• /
• pp.25-39
• /
• 2009

This research attempts to analyze the physical characteristics of middle school girls and compare the product sizes and patterns of school uniform blouses by brand. And wearing tests were performed regarding the appearance of blouse by bland. The results are follows. The standard deviation for bust circumference and waist circumference of middle school girls measured in 2004 were showed extremely large difference among individuals compared to the previous results. While waist back length reached adult size by $2^{nd}$ grade high school, bishoulder length reached adult size by $2^{nd}$ grade middle school. And girls after $2^{nd}$ grade middle school had their depth and breadth of bust, underbust circumference and bust circumference growing proportionally. These results need to be reflected in producing a pattern drafting for middle schoolers. By comparing wearing test results on appearance, it was shown that in terms of ease of bust circumference, the expert group evaluated brand with less ease as not having adequate ease compared to brand, while the middle schooler group evaluated as having sufficient ease. The front silhouette also showed same results. This reflects the preference for appearance by the middle schooler group, which is a factor to be considered during pattern drafting of school uniform blouse.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.6 no.2
• /
• pp.9-15
• /
• 1982

This study was conducted to examine the relation between the clothing materials and the garment's ease under wearing condition. Wearing test of slacks in the same pattern which were made of 3 woven fabrics and 1 knitted fabric have teen carried out. Subjects were 5 female students. Some physical properties of these fabrics were investigated. The following results were obtained. 1, By analysis variance with the results of sensory test which was tested by paired com-parison method, it was obtained that the effect of materials on the garment's ease were significant at the $1\%$ level on every part of stacks and posture of subject. It indicates that there is a difference of materials from materials in garment's ease. 2. Significant at the $5\%$ level among the materials. Jersey and Jean were looser than the other two materials. Clothing materials have considerable effect on the garment's ease of slacks, therefore it was noticed that the ease of slacks must have considered the clothing materials. It is more necessary in working dress. 3. Elastic recovery of width was more contributive to garment's ease of slacks than any other physical properties.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.2
• /
• pp.294-306
• /
• 2008

The purpose of this study is a men's dress shirt pattern by somatotype for mass customization system that is rising to the surface as a new production system. Subjects were 65 men aged from 25 to 44 for making research pattern and 9 men for wearing test. The dress shirt went through the secondary wearing test and sensory evaluation to verify the propriety of the research pattern. The results were as follows: For making research dress shirts pattern used the body parts size that were height, the circumference of the neck, the chest circumference, the length between biacromion, the arms length, and the waist circumference. The waist back length, the waist to hip length and the pattern length of were set by the calculation formula based on the height. The ease of 16cm for the chest circumference and A type had the ease of 10cm for the waist circumference, Y type had the ease of 8cm and B type had 12cm. Through the wearing test, the research pattern showed significant difference from the comparative patterns so additional two items of the length between biacromion and waist circumference were added to the items used in the comparative patterns through which satisfactory results were obtained. In the secondary wearing test for the dress shirt, all the items, except for the front centerline, were evaluated excellent. As a result of evaluating by the figure type, the normal type was evaluated best in all the items.