• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1998.03a
• /
• pp.28-31
• /
• 1998

Wrinkling is one of the major defects in sheet metal products and may be also attributable to the wear of the tool. The initiation and growth of the wrinkles are influenced by many factors such as stress state, mechanical properites of the sheet material, geometry of the body, and contact condition. It is difficult to analyze the wrinkling initiation and growth considering the factors because the effects of the factors are very complex and the wrinkling behavior may show wide variation for small deviation of the factors. In this study, the bifurcation theory is introduced for the finite element analysis of wrinkling initiation and growth, All the above mentioned factors are conveniently considered by finite element method. The finite element formulation is based on the incremental deformation theory and elastic-plastic material modeling. The finite element analysis is carried out using the continuum-based resultant shell elements considering the planar anisotropy of the sheet metal. The proposed method is verified by employing to column buckling problem. And then, the initiation and growth of wrinkling in deep drawing of cylindrical cup are analyzed.

• 연구논문집
• /
• s.25
• /
• pp.175-184
• /
• 1995

Mechanical properties of the gas nitrocarburized product depend on the surface compound layer and the diffusion zone formed. The compound layer improves the wear resistance, and the corrosion resistance. Though phase composition, pore layer and growth rate of the compound layer varies according to the treatment time, temperature and the kind of the steel substrate, they are strongly influenced by the environmental gas composition. In the current study, the growth behavior of the compound layer and diffusion zone of the carbon steel and the alloy steel upon nitrocarburizing treatment at $570^{\circ}C$, and the phase composition and the variation in the growth rate of the compound layer according to the variation of the gas environment which was the medium of the nitriding and carburizing reaction were investigated.

• Transactions of Materials Processing
• /
• v.9 no.2
• /
• pp.128-139
• /
• 2000

Wrinkling is one of the major defects in sheet metal products and may be also attributable to the wear of the tool. The initiation and growth of wrinkles are influenced by many factors such as stress state, mechanical properties of the sheet material, geometry of the body, and contact condition. It is difficult to analyze the wrinkling initiation and growth considering the factors because the effects of the factors are very complex and the wrinkling behavior may show a wide variation for small deviations of the factors. In this study, the bifurcation theory is introduced for the finite element analysis of wrinkling initiation and growth. All the above mentioned factors are conveniently considered by the finite element method. The finite element formulation is based on the incremental deformation theory and elastic-plastic elements considering the planar anisotropy of the sheet metal. The proposed method is verified by employing a column buckling problem. And then, the initiation and growth of wrinkling in deep drawing of cylindrical cup are analyzed.

• Journal of the Korean institute of surface engineering
• /
• v.48 no.2
• /
• pp.56-61
• /
• 2015

In this study, the wear performance of manganese phosphate coating on SM45C with addition agent of Tartaric acid and Citric acid were investigated. The Surface morphology of manganese phosphate coating was examined by Scanning Electron Microscope (SEM) and Energy Dispersive X-ray spectroscopy (EDS). It is found that Mn, P, Fe, O and C. The crystal structure and thee composition was analysis and determined by using XRD. The XRD results indicated that manganese phosphate coatings are mainly composed of $(Mn,Fe)_5H_2(PO_4)_44H_2O$ and consists of a lot of close packed lump crystalline. Based on the time dependence of morphology and the weight of manganese phosphate coating, it shows that the phosphating process mainly includes three stages: corrosion of the substrate, creation and growth of phosphate crystal nucleus and thickening of manganese phosphate coating. The wear tests were performed in a ball on disc apparatus as per ASTM G-99 Standard. It was showed that the initial wear was quite high followed by low sludge.

• Journal of the Korean Society for Heat Treatment
• /
• v.3 no.4
• /
• pp.10-22
• /
• 1990

A study has been investigated on the effect of mechanical properties (tension strength, rotary bending fatigue strength, wear resistance, hardness) according to the carbide particle size variation by the treatment of 1) quenching tempering, and 2) quenching, subzero treatment and tempering. The material used in this investigation was a typical bearing steel, high C high Cr, AISI E 52100. The result obtained in this study were as follows : (1) Finer the carbide particle size increasing the hardness and retained austenite in same quenching condition. (2) Finer the carbide particle size reduced the tension and rotary bending fatigue which were resulted from austenite grain growth and carbide precipitation on grain boundry that induced by carbide refine heat treatment. (3) Finer the carbide particel size increasing the wear resistance which were resulted by uniform distribution of carbide and increased hardness induced by microstructural uniform hardenability of matrix. (4) When the carbide particles were refinded, subzero treatment is effective only wear resistance and hardness.

• Journal of Korea Foundry Society
• /
• v.8 no.3
• /
• pp.296-309
• /
• 1988

In this study the mechanical properties of ferritic ductile cast iron in as-cast are discussed by metallographic considering the effect of phosphorus content(about 0 - 0.8wt.%). In ferritic S.G. cast iron containing about 4.2wt.% Si, 0.5wt.% Ni, 0.02wt.%B, these samples are investigated for castability, microstructure, machinability, wear resistance, mechanical and thermal properties. The main results are summarized as follows. 1) The chill depth increased greatly with P addition up to about 0.6wt.% but the tensile strength and the elongation are decreased smoothly. 2) The size of S.G. and the amount of steadite increase with increasing P content. This means the tendency of increasing the number of S.G. 3) The maximum value of wear by mechanical fracture was appeared at the abrasion speed of 1.14m/sec and the plastic Flow layers are stretched longly on the wear surface with decreasing P content. 4) Although the coefficient of thermal expansion increased with P addition, the cast iron growth was slowing down extremely at 0.6w.% P or more.

• Journal of the Korean Society of Costume
• /
• v.60 no.4
• /
• pp.30-44
• /
• 2010

The definition of pregnancy has changed as society and its values have developed through different periods of history. In the ancient period, the definition of a woman's fertility was that female deities provided fecundity to barren women and barren land, and protected both the pregnant women during the period of gestation and also the land during the time of growth. These goddesses also administered the appropriate ceremonial rituals for conception and childbirth, and for planting and harvesting. After that, for the last 2,000 years, the most conspicuous icon has been "The Virgin Mary with the Infant Christ". Mary was the mother of Jesus Christ and model for Christian women. However, the centuries the image of woman and pregnancy has been changed, modern society through education, careers and job opportunities allows many women to be more than just a wife or a mother. Moreover, in the 21st century, many pregnant women want stylish maternity wear because they are proud and their minds are opened by these new icons of birth culture as like the pregnancy of many famous stars. From this the purposes of this study are as follows, Firstly, to study on the meaning of woman's fertility from ancient period to present time by social changes. Secondly, to investigate the historical concept of the maternity wear for current modern maternity fashion market. Finally, to expect to use this study would be helpful basic data for develop of the new researches of the maternity fashion in the future.

• Journal of Fashion Business
• /
• v.16 no.2
• /
• pp.27-43
• /
• 2012

Considering the rapid growth of mobile industry and the emerging application marketing, this study focused on fashion applications, which had not drawn much academic attention before, and analysed relevant content composition, information-seeking benefits based on users' lifestyles and resulting differences in satisfaction and loyalty. In short, fashion applications were divided into fashion and non-fashion brand apps. Brand apps were subdivided into luxury, women's wear, men's wear, casual wear, sportswear, accessories and the like. Non-brand apps included commerce, magazine, information, style tip, SNS and wardrobe manager types. As for users' lifestyle-based information search, the higher the tendency to search information on the internet and to favour reasonable consumption, the more basic information on products and brands they sought, whereas the higher the tendency to look for high-profile brands and to favour global culture, the more additional information like images or entertainments they sought. To sum up, given that studies on fashion-specific applications were rare, the present study reviewed and categorized current fashion applications, and suggested theoretical and practical groundwork for developing content based on target consumers' lifestyle and for planning fashion applications in practice.

• The Research Journal of the Costume Culture
• /
• v.9 no.3
• /
• pp.389-397
• /
• 2001

The purpose of this study is to examine the growth potentiality of the Easy-Order System in the domestic male business suit market. This study is based on a questionnaire survey of males, who usually wear a business suit in the work place, and females whose husband wear a business suit. The pertinently answered 108 questionnaires (males: 72 and females: 36) were analyzed with SPSS 8.0. The results of this survey were as follows; 1. Gender, occupation, and height of consumers had a considerable effect on their on their intention of purchasing a preference of this system. 2. Subjects, who were dissatisfied with the limited option of purching a business suit in retail shops, had a significant intention of purchasing a business suit through the Easy-Order System. 3. It had no effect on consumers\\` preference and purching intention of the Easy-Order System whether or not they recognize this system. And the Easy-Order System is not estimated to have major repercussions over consumers by now.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.885-886
• /
• 2006

Significant advances in mechanical testing for hard materials are discussed in this paper. There are three specific areas that are covered. In the measurement of fracture toughness factors such as the control of slow crack growth to produce strating cracks, and evaluating reproducibility and repeatability of tests have been recently examined. The miniaturization of tests reduces the amount of material that is used in testing, improves the throughput of tests, and also improves cost effectiveness. New techniques such as stepwise testing and micro scratch testing have contributed to significant additions to the knowledge of the wear mechanisms that operate in these materials.