• 한국세라믹학회지
• /
• 제54권4호
• /
• pp.314-322
• /
• 2017

This study investigates changes in the mechanical behavior, such as changes in indentation load-displacement curve, wear resistance and contact fatigue resistance of thermal barrier coatings (TBCs) by thermal cycling test and thermal shock test. Relatively dense and porous TBCs on nickel-based bondcoat/superalloy are prepared; the highest temperature applied during thermal durability test is $1350^{\circ}C$. The results indicate that the porous TBCs have relatively longer lifetime during thermal cycling and thermal shock tests, while denser TBCs have relatively higher wear and contact fatigue resistance. The mechanical behavior is influenced by sintering of the TBCs by exposure to high temperature during tests.

• KSTLE International Journal
• /
• 제1권1호
• /
• pp.48-51
• /
• 2000

Surface damage accumulation of alumina ceramics under the cyclic stress state was analyzed. The alternating stress state in repeat pass sliding contact was simulated by a synchronized biaxial (normal and tangential) repeated indentation technique. Wear debris formation mechanism through damage accumulation and fatigue grain failure in both alumina ceramic balls and flat disks was confirmed, and the contact induced surface degradation due to fatigue cracking accumulation was quantified by measuring vertical contact displacement. Variation of structural compliance (slope of load-displacement curve) of two contacting bodies was expressed as a variation of the apparent elastic property, called pseudo-elastic constant, of the contact system.

• 한국안광학회지
• /
• 제5권2호
• /
• pp.65-72
• /
• 2000

콘택트렌즈 피팅후 기초검사와 베이스커브의 무작위 피팅검사, 그리고 베이스커브의 의도적인 변화에 따른 재피팅검사율 이용하여 중함수의 소프트 콘택트렌즈의 피팅과 베이스커브의 효과에 대하여 조사하였다. 시험렌즈 피팅후 렌즈의 위치, 순목후 렌즈의 움직임, 자각적 착용감을 평가하여 적합한 베이스커브를 평가한 결과 본 연구에 사용한 소재의 소프트 콘택트렌즈에서는 베이스커브가 8.4mm의 경우 최상의 피팅 효과를 보였다. 베이스커브를 8.4mm보다 큰 경우 순목후 렌즈 움직임보다 피팅후 렌즈의 중심이탈정도가 심하고 자각적 검사결과 의도적인 재피팅을 시도하였다. 다른 제조회사렌즈는 정교한 디자인과 제조상의 차이 때문에 언제나 같은 방법으로 피팅 결과가 나오는 것은 아니다. 본 실험에 사용한 중함수율 소프트콘택트렌즈는 대다수의 눈에 최적의 피팅을 제공해 주는 것은 8.4mm 베이스커브렌즈가 효과적이었다.

• 한국생산제조학회지
• /
• 제8권4호
• /
• pp.87-92
• /
• 1999

Generally the life of die is limited by fatigue fracture or dimensional inaccuracy originated from wear. In this paper to predict the fatigue life of die the stress and strain histories of die can be predicted by the analysis of elastic-plastic finite element method and the elastic analysis of die during the process analysis of workpiece. Also the stress-life curve of die material can be obtained through experiment. With the above to재 facts we propose the analysis method of prediction fatigue life in die,. In the proposed model the analysis of elastic-plastic finite element method for material is carried out by using ABAQUS. Surface force resulted from the contacting border of the die and workpiece is transformed into the nodal force of die to implement elastic analysis. besides the proposed analysis model of die is applied to extrusion die and forging. die.

• Tribology and Lubricants
• /
• 제15권2호
• /
• pp.164-170
• /
• 1999

Gerotor is widely used as a hydraulic pump or motor, by virtue of its volume changing ability. Performance deterioration of a gerotor hydraulic motor mainly due to the wear come from the contact between inner rotor with trochoidal curve and outer rotor with circular arc profile. This research covers the basic investigation about the contact forces of a gerotor hydraulic motor using analytic method. The influence of the eccentricity and the radius of circular arc teeth on the contact stress was evaluated.

• 한국생활과학회지
• /
• 제23권3호
• /
• pp.515-527
• /
• 2014

This study is intended to develop the creative and high value-added products as well as the development of diversity for jump suit for the future by analyzing the trend and feature shown in jump suit in the modern fashion. In the research methodology, the analysis was carried out over a total of 351 work pieces on jump suit among those presented in the collection of Paris, Milan, New York and London from 2006S/S to 2013F/W as well as literature review. The aesthetic features on suit jump design introduced in the modern fashion could be characterized as the following. First, both upper and lower garments are composed with a simple array of items and the stress was put on modernity feature through minimal expression technique. The feature of solid simplicity was also given with achromatic color or neutral monochrome. Second, the feminity image was emphasized with adoption of such highlighting items as detailed add-ons, tops, camisoles and blouses that stress the organically curved streamline including silhouette, material itself, crease and drape that enable the direct and indirect exposition of human body and the expression of smooth curve in human body. Third, jump suit revealed the multipurpose feature as item available for the diverse wear such as working habiliment, sports wear, uniform, office wear and evening wear, depending on the terms and conditions. Fourth, the deconstructive characteristic appeared through integration with various items, destruction of formative structure, non-structural shape, and ambiguity in wearing method.

• 한국의류학회지
• /
• 제40권4호
• /
• pp.701-715
• /
• 2016

This research compared 3 types of jacket pattern design methods for men's wear (age range 25-35) in textbooks. We are to develop research pattern with problem solving based on an analysis of three jacket patterns. The comparative analysis revealed that loose-silhouette slopers A and B scored high in functional evaluation and low in appearance evaluation. However, the tight-silhouette slim-line sloper C received high points in appearance evaluation, but low scores in functional evaluation. All three slopers were evaluated low in the back appearance. The design characteristics of the development jacket sloper were: front width, ($1/10chest{\times}2$)+0.8cm; side width, 1/10 chest+5.5cm; back width, ($1/10chest{\times}2$)+1.5cm; armscye depth, 1/8 chest+11cm; waist back length, 1/2 jacket length+5cm; and hip length, 1/2 (jacket length-waist length)+1cm. The proportions against jacket length were applied to waist length, hip length, and the position of chest/waist pockets. In addition, the back part with low appearance estimation was adjusted as comfortable with the back curve line. Appearance evaluation and 3D clothes modeling system (CLO) showed an overall improvement in the developed jacket sloper when compared to the original jacket slopers.

• 대한전자공학회논문지SP
• /
• 제46권6호
• /
• pp.1-15
• /
• 2009

본 논문에서는 이동 중인 철도차량 제륜자의 두께, 편마모 및 제륜자와 차륜 사이의 거리를 자동으로 측정하는 시스템을 제안한다. 철도차량의 제륜자는 촬영 시스템이 설치된 곳을 지날 때 자동으로 촬영되며, 두께 등을 측정하기 위해 가장 먼저 영상 내에서 제륜자의 위치를 검출한다. 이는 제륜자의 위치가 영상 마다 다르기 때문이며 이를 적응적으로 찾기 위해, 제륜자와 차륜 사이에 나타나는 그림자 영역을 이용한다. 그림자 영역의 경계는 9차 다항식을 통해 모델링되며, 그 영역을 지나는 임의의 곡선 (초기 곡선)은 제약 곡선 피팅 방법을 통해 검출된다. 다음은 검출된 초기 곡선과 명암도 변화 정보를 이용하여 제륜자의 앞과 뒤, 차륜 상의 세 곡선 및 제륜자의 수직면을 지나는 직선을 검출한다. 최종적으로, 앞서 구한 곡선과 직선을 이용하여 제륜자의 두께, 편마모 및 제륜자와 차륜 사이의 거리를 측정한다. 실험에서는 제안된 방법을 실제 선로에서 촬영한 영상에 대해 적용해 보았으며, 그 결과 평균 0.654mm의 두께 측정 오차를 나타내었다.

• 한국해양공학회지
• /
• 제23권2호
• /
• pp.74-80
• /
• 2009

Surface hardening treatments, such as using the high-frequency induction hardening method, are widely used to increase the fatigue life and prevent the failure of materials by locally increasing the surface hardness. This method, in particular, brings an improvement in static strength by compressive residual surface stress due to the hardening. In this study, the mechanical properties of high-frequency induction hardened SCM440 steel were investigated. These results were also compared with those for base metal and a Q/T (tempering after quenching) treatment specimen. The test results showed that partially high-frequency induction hardened SCM440 steel specimens were more improved in static strength, surface hardness, fatigue limit, and anti-wear than the base metal and Q/T treatment specimens. In particular, the fatigue limit of the high-frequency induction hardened SCM440 steel increased by more than about 52% compared to that of base metal and by about 25% compared to that of the Q/T specimen.

• 한국의류학회지
• /
• 제29권8호
• /
• pp.1102-1113
• /
• 2005

The propose of this study is to develop the optimal sizing system of ready-to-wear f3r elementary school girls using a newly invented statistical technique. The body measurements was classified by the method that equalizes the distribution of the subjects using the probability density function, to theoretically systemize a method to determine a size range of ready-to-wear for elementary school girls between 6 to 12 years old. The statistical method were 1) The total of 11 height groups, which size interval from one another is 6 cm that is an average height gap between each age. 2) In order to determine an approximate figure (m ${\times}$ n) to establish the appropriate sizes far each height group that fit to the combinations of bust and hip girth, which based on their means and standard deviations on the probability density curve to produce the standard normal distribution. 3) m and n were aligned by 4cm -the grading increments used for patterns making- and determined the size ranges by confirming the approximate figures of m and n. 4) The representative values were determined by an area ratio calculated by dividing the area determined from the range of bust and hip girth with the representative value. Considering the characteristics of subjects' distribution, the area ratios was used. 5) Weight was calculated by seeking a growth exponent for each age and multiplying it by the number of girls that fit to each size range. As sections that show the highest weight are more likely sought by the consumers, these sections were determined as the optimal size standards. 6) This optimal sizing system consists of sizes determined by the optimal size standards and its sizes are marked with height, bust and hip girth.