• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.31 no.2
• /
• pp.151-157
• /
• 2013

The law for indicating the address based on the street name has taken effect in 1997. The address based on land-lot number will be changed to the address based on the street name giving odd numbers to the buildings situated on the left side and even numbers to the buildings situated on the right side per street. Searching locations by street name addresses is possible for residential areas, on the other hand, the system of finding locations is insufficient for farmlands, mountains and others, so it is unable to cope with crimes and emergency rescue. In order to make up for the weak points of street name address, the national point number, grid reference system was introduced for finding location of non-residential areas. Therefore, the purpose of this paper is to help the introduction the national point number. In this paper, we proposed a territory-oriented control point and grid range for the national point number. Numbering scheme of grid zone shall be alphanumeric, a two-letter pair Hangul and the grid coordinates in terms of Easting and Northing. We also proposed the notice area for the national point number and location of signs, application about the public and private sector.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.25 no.6
• /
• pp.525-532
• /
• 2012

The recently constructed buildings are ensuring seismic safety with enhanced design criteria. But, the buildings unapplied enhanced design criteria are very weak. In this study, steel grid shear wall is proposed as a solution of seismic retrofit to ensure safety of the existing buildings for the earthquake. And the structural performance experiments were carried out under axial force and cyclic lateral loads. The two specimens were made of a reference RC frame and steel grid shear wall in-filled RC frame. The test setup configured with two dynamic actuators, for the axial force with a 500kN capacity actuator and for the cyclic lateral load applied with the 2,000kN actuator. Compared with control specimen, the strength, stiffness, ductility, energy dissipation capacity of the seismic retrofit structures is evaluated.

• Transactions on Electrical and Electronic Materials
• /
• v.15 no.2
• /
• pp.100-102
• /
• 2014

$Ag(Ta,Nb)O_3$ materials have a perovskite structure with a low loss tangent. These materials have been widely researched for their applications as high-frequency, passive components. Also, $Ag(Ta,Nb)O_3$ materials have weak frequency dispersion with high dielectric permittivity which gives them enormous potential for use in electronic components, including the filters, and embedded capacitors. Therefore, our research will discuss the structural and electrical relaxation properties of $Ag(Ta_{0.8}Nb_{0.2})O_3$ ceramics for device applications. We will investigate using X-ray diffraction to understand their structural properties and will analyze voltage dependent leakage current and timedependent relaxation behavior to understand their material properties.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.11
• /
• pp.2068-2086
• /
• 2011

Based on the quincunx sub-sampling grid, the New Interleaved Hierarchical INTerpolation (NIHINT) method is recognized as a superior pyramid data structure for the lossless and progressive coding of natural images. In this paper, we propose a new image interpolation algorithm, Edge Adaptive Hierarchical INTerpolation (EAHINT), for a further reduction in the entropy of interpolation errors. We compute the local variance of the causal context to model the strength of a local edge around a target pixel and then apply three statistical decision rules to classify the local edge into a strong edge, a weak edge, or a medium edge. According to these local edge types, we apply an interpolation method to the target pixel using a one-directional interpolator for a strong edge, a multi-directional adaptive weighting interpolator for a medium edge, or a non-directional static weighting linear interpolator for a weak edge. Experimental results show that the proposed algorithm achieves a better compression bit rate than the NIHINT method for lossless image coding. It is shown that the compression bit rate is much better for images that are rich in directional edges and textures. Our algorithm also shows better rate-distortion performance and visual quality for progressive image transmission.

• Journal of Advanced Navigation Technology
• /
• v.17 no.6
• /
• pp.736-748
• /
• 2013

In this paper, we analyse the vulnerabilities of KL scheme which is an ID-based authentication scheme for AMI network, and propose two kinds of authentication schemes which satisfy forward secrecy as well as security requirements introduced in the previous works. In the first scheme, we use MDMS which is the supervising system located in an electrical company for a time-synchronizing server, in order to synchronize smart grid devices in home, and we process device authentication with a new secret value generated by OTP function every session. In the second scheme, we use a secret hash-chain mechanism for authentication process, so we can use a new secret value every session. The proposed two schemes have strong points and weak points respectively and those depend on the services area and its environment, so we can select one of them efficiently considering real aspects of AMI environment.

• Journal of Environmental Science International
• /
• v.20 no.6
• /
• pp.737-753
• /
• 2011

The typical characteristics of seasonal winds were studied around the Pohang using two-stage (average linkage then k-means) clustering technique based on u- and v-component wind at 850 hpa from 2004 to 2006 (obtained the Pohang station) and a high-resolution (0.5 km grid for the finest domain) WRF-UCM model along with an up-to-date detailed land use data during the most predominant pattern in each season. The clustering analysis identified statistically distinct wind patterns (7, 4, 5, and 3 clusters) representing each spring, summer, fall, and winter. During the spring, the prevailed pattern (80 days) showed weak upper northwesterly flow and late sea-breeze. Especially at night, land-breeze developed along the shoreline was converged around Yeongil Bay. The representative pattern (92 days) in summer was weak upper southerly flow and intensified sea-breeze combined with sea surface wind. In addition, convergence zone between the large scale background flow and well-developed land-breeze was transported around inland (industrial and residential areas). The predominant wind distribution (94 days) in fall was similar to that of spring showing weak upper-level flow and distinct sea-land breeze circulation. On the other hand, the wind pattern (117 days) of high frequency in winter showed upper northwesterly and surface westerly flows, which was no change in daily wind direction.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.1
• /
• pp.34-49
• /
• 1998

In this study, turbulent flows in a grooved channel are numerically investigated by Large Eddy Simulation (LES). Especially, a parametric study is carried out to study effects of length and depth of a groove on large-scale flow structures. For one test case, comparison of LES results with those of DNS reveals a good agreement even though the number of grid points of LES is only 6.5% of that of DNS. This confirms that LES is a suitable tool for a parametric study of turbulent flows. The subsequent parametric study using LES shows that the large-scale turbulent structures are significantly affected by the geometry of the groove. Especially, when the length of the groove is short such that the recirculation region occupies the entire groove, the turbulent flow in the groove becomes very weak in both mean and fluctuation quantities.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.22 no.2
• /
• pp.13-24
• /
• 1994

the purpose of this study was to suggest managemental strategies for one-day use recreational area in public sector under competitive environment with private sector. Data was collected from citizens of Seoul, and 10 recreational areas were determined by a preliminary survey. Theses areas were regarded as "products", then positioning was applied to these products. Perceptual map was produced by multidimensional scaling to identify degree of competition among areas. Properties, which were developed by the Kelly Repertory Grid, were utilized to understand the strong and weak points of each area. Ideal types of recreational areas were analyzed by PREFMAP, then the size and distribution of recreation market of Seoul were found by grouping of individual ideal point by cluster analysis. Several strategies were suggested to enhance the competitive power for public recreation areas, and a few comments were described to improve this method for future research.

• New & Renewable Energy
• /
• v.6 no.1
• /
• pp.12-19
• /
• 2010

In Korea, experiences in wind farm operation are limited and the foundation for setting standards in electrical system connection is still weak in comparison to the operation experience in connection of wind power to the electrical system of other countries around the world. Therefore, standards that are being applied in various countries for connection and optimal operation in wind farms need to be examined, and in addition, procedures for the assessment of the effects on the system are needed for setting connection standards and optimal operation plans in accordance with Korean electrical system characteristics. In this study, procedures for the assessment of effects of wind power connection to the electrical system are presented.

• New & Renewable Energy
• /
• v.6 no.2
• /
• pp.19-26
• /
• 2010

Experiences in wind farm operation are very limited in Korea, and the foundation for setting standards in power system connection is weak. Therefore, connection and operation standards for wind farms in other countries must be reviewed and power system operation criteria need to be established in order to set up connection standards and optimal operation plans according to the Jeju power system. In this study, reactive power control characteristics of a wind farm were analyzed using a wind farm model of the Jeju power system to propose power system connection operation standards for wind generation within the Jeju power system. Also, change in characteristics of the power system for the application of each reactive power control standard was confirmed, and the results were verified through trial tests arm was analyzed.