• Journal of Communications and Networks
• /
• v.16 no.3
• /
• pp.344-354
• /
• 2014

Transmission control protocol friendly rate control (TFRC) is designed to mainly provide optimal service for unicast applications, such as multimedia streaming in the best-effort Internet environment. However, high bandwidth networks with large delays present an environment where TFRC may have a problem in utilizing the full bandwidth. TFRC inherits the slow-start mechanism of TCP Reno, but this is a time-consuming process that may require many round-trip-times (RTTs), until an appropriate sending rate is reached. Another disadvantage inherited from TCP Reno is the RTT-unfairness problem, which severely affects the performance of long-RTT flows. In this paper, we suggest enhanced TFRC for high quality video streaming over high bandwidth delay product networks. First, we propose a fast startup scheme that increases the data rate more aggressively than the slow-start, while mitigating the overshooting problem. Second, we propose a bandwidth estimation method to achieve more equitable bandwidth allocations among streaming flows that compete for the same narrow link with different RTTs. Finally, we improve the responsiveness of TFRC in the presence of severe congestion. Simulation results have shown that our proposal can achieve a fast startup and provide fairness with competing flows compared to the original TFRC.

• Journal of Magnetics
• /
• v.20 no.2
• /
• pp.176-185
• /
• 2015

We present the design optimization of the magnetic pole and slot design options that minimize the cogging torque of permanent-magnet (PM) brushless generators for small wind turbine generators. Most small wind-turbines use direct-driven PM generators which have the characteristics of low speed and high efficiency. Small wind-turbines are usually self-starting and require very simple controls. The cogging torque is an inherent characteristic of PM generators, and is mainly caused by the generator's geometry. The inherent the cogging torque can cause problems during turbine start-up and cut-in in order to start softly and to run a power generator even when there is little wind power during turbine start-up. Thus, to improve the operation of small turbines, it is important to minimize the cogging torque. To determine the effects of the cogging torque reductions, we adjust the slot opening width, slot skewing, mounting method of magnets, magnet shape, and the opening and combinations of different numbers of slots per pole. Of these different methods, we combine the methods and optimized the design variables for the most significant design options affecting the cogging torque. Finally, we apply to the target design model and compare FEA simulation and measured results to validate the design optimization.

• Journal of Chest Surgery
• /
• v.32 no.11
• /
• pp.978-983
• /
• 1999

Background: Complement activation with transpulmonary leukocyte sequestration is considered a main mediator leading to ischemia-reperfusion lung(I-R) injury. We studied the role of leukocytes in the formation of I-R injury in ovine cardiopulmonary bypass(CPB) model with a membrane oxygenator. Material and Method: Five sheep were used. CPB circuitry consisted of a roller pump(American Optical Corp., Greenwich, CT, USA) and a membrane oxygenator(UNIVOX-IC, Bentley, Baxter Health Corp, Irvine, CA, USA). The CPB time was fixed at 120 min. Ten minutes after the start of CPB, total CPB was established. Thereafter a total CPB of 100 min was performed, followed by another 10 min of partial CPB. The CPB was discontinued and the animals were fully recovered. For measuring left and right atrial leukocyte counts, blood samples were taken before thoracotomy, 5 min and 109 in after the start of CPB, and 30 min and 120 min after weaning. C3a was measured before thoracotomy, 109 min after the start of CPB, and 30 min and 120 min after weaning. Plasma malondialdehyde(MDA) was checked before thoracotomy, 109 min after the start of CPB, and 30 min after weaning. One to two grams of lung tissue were taken for water content measurement before thoracotomy, 109 min after the start of CPB, and 30 min after weaning. Lung biopsy specimens were examined by light and electron microscopy. Result: Of 5 animals, 4 survived the experimental procedures. Of these, 3 animals survived on a long-term basis. No significant differences in transpulmonary gradients of leukocyte were found and no significant complement activation was expressed by C3a levels. MDA level did not show significant changes related to lung reperfusion despite an increase after the start of CPB. On both light and electron microscopic examinations, mild to moderate acute lung change was observed. Interstitial edema, leakage of erythrocytes into the alveolar space and endothelial cell swelling were the main findings. Water content of the lung showed a slight increase after the start of CPB, but there was no statistical significance. Conclusion: These findings indicate that ischemia-repersusion lung injury may not be from complement activation-leukocyte sequestration but from another source of oxygen free radicals related to CPB.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.8
• /
• pp.228-234
• /
• 2020

The number of collaboration professors has significantly increased since the last decade, along with rapid technological developments and the necessity of entrepreneurial universities. Despite the expansion of collaboration professor recruitment, few empirical studies have examined the contribution of collaboration professors to university-industry collaboration. In particular, we do not have sufficient knowledge about the role of collaboration professors in the start-ups of undergraduate students, which is one of major duties of these professors. Following previous studies, this study constructs panel data of 203 universities explaining the proportions of collaboration professors, activities of undergraduate students, support of universities for students preparing new firms, and attributes of universities from 2017 to 2019. The results indicate that the percentage of collaboration professors is not statistically related with the start-ups of undergraduate students, whereas that of full-time professors working at organizations specializing in start-ups is positively and significantly associated with the number of new firms of undergraduate students. In addition, the percentage of students who had attended the start-up camps and the availability of financial support from universities for students who attempt to create new firms positively influence the start-ups of undergraduate students.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.2
• /
• pp.106-111
• /
• 2015

Since most reference voltage generator circuits have bi-stable characteristics, it is important to employ a proper start-up circuit to operate a reference generator in the desired state. In this paper, we propose a start-up circuit for a low voltage reference generator. This start-up circuit determines the state of the circuit reliably by measuring the current drawn by BJTs in the circuit, which is well-defined in the desired state. To measure the current using CMOS-compatible devices only, a comparator with an internal offset voltage is used. The reliability of the proposed circuit is confirmed by Monte-Carlo simulations of the start-up operation, which show that, with the proposed start-up circuit, the low voltage reference generator starts reliably with supply voltages over 850mV even in the presence of device mismatches.

• The Journal of the Korea Contents Association
• /
• v.19 no.12
• /
• pp.229-237
• /
• 2019

Though start-ups by small businessmen are increasing year by year, the success rate of start-ups have been low. Accordingly, it is necessary to look at various ways to improve the success rate of start-ups by small businessmen. Most previous studies on the issue have focused on identifying influential factors that lead to the success and growth of start-ups by them, mostly based upon quantitative perspectives. Few has approaced with qualitative perspective such as actual case studies in academic papers. In this study, after analyzing a wide range of successful cases of start-ups by small businessmen, we will develop countermeasures by business types and suggest practical lessons that can be appropriately utilized in starting a new small business.

• Journal of Distribution Science
• /
• v.11 no.10
• /
• pp.37-45
• /
• 2013

Purpose - Appropriate response to the fast changing economic environment determines SMEs' competiveness in the era of globalization and open market and, therefore, government policies to strengthen SME's competitiveness will be very important in the future. It is time to investigate the element of strategic orientation that is necessary for strengthening the competitiveness of SMEs, and its effect on the success of a business start-up. This study analyzes the network orientation in addition to existing strategic orientation, and focuses on price and quality management capability as mediators for strategic orientation and outcomes of business start-ups. Research design/data/methodology - The orientations of technology-based business founders were classified into market, technology, network, and entrepreneurial orientation. We then investigated the effect of these orientations on product price and quality management capability, as well as the influence of price and quality management capability on the outcome of a business start-up. This study is based on the nation-wide survey of the founders and members of technology-based business establishments. The survey was administered to 300 selected companies via email for a period of one month, at the end of which 175 companies replied with valid answers. Further, for effective and objective research, we used SPSS 14.0 and Amos 7.0 for structural equation modeling assumptions and hypothesis verification. Results - Except for entrepreneurial orientation, the other three orientations, namely, technology, market, and network orientations, affect the price management capability according to our results. The price management capability relates significantly with the sales and customer satisfaction. Especially, technology orientation is the core competency of start-ups that affects price and quality management capabilities. However, technology and entrepreneurial orientation do not influence the outcome of business start-ups, but affect their quality management capabilities. Conclusions - This study confirms that the strategic orientation affects product price as well as quality management capabilities, to introduce new products and achieve successful outcomes. In conclusion, new business founders face the dilemma of trade-off between price and quality in the planning stage of new product development. In particular, price management capability directly affects the outcome. Therefore, price management is more important for a successful start-up than quality management. Especially, during the initial stages of starting up a new business, price management capability entails following the market-leading company, or price penetration strategy. In this stage, price management is dependent on the information from outside rather than on the founder's decision, and it directly affects sales performance and customer satisfaction. In contrast, quality management capability is directly related to the technology capability and market experience of founders. In this case, subjective and proactive decision making is required for differentiation and development of demand in the niche market, which does not directly influence the sales performance and customer satisfaction.

• Tribology and Lubricants
• /
• v.31 no.3
• /
• pp.109-124
• /
• 2015

This paper presents a wear analysis procedure for the journal bearings on a stripped-down single-cylinder engine during start-up and coast-down by motoring. A journal bearing is in the mixed elastohydrodynamic (EHL) lubrication region when the shaft speed is less than the corresponding lift-off speed. Below the lift-off speed, a wear scar can form on bearing surfaces. In part 1 of this paper, we develop the appropriate formulations and the calculation procedure for the analysis. Specifically, we formulate an equation for modified film thickness in a journal bearing considering the additional wear volume. In order to obtain the modified specific wear rate induced by the modified Archard’s wear coefficient, we utilized the extended non-dimensional diagram for the specific wear rate, k, the fractional film defect coefficient, Ψ and the asperity load sharing factor, γ₂. This asperity load sharing factor is newly calculated by setting the Zhao-Maietta-Chang (ZMC) asperity contact pressure equation coupled with the central film thickness equation derived by using the ZMC asperity contact model equal to the modified central contact pressure derived by using the central (or maximum) contact pressure at the dry rough line-contact configuration. We can use the procedure introduced in this paper to determine the lifetime (or longterm) linear wear in radial journal bearings that is a result of repeated stop-start cycles.

• Journal of Advanced Navigation Technology
• /
• v.11 no.2
• /
• pp.163-169
• /
• 2007

In this paper, we propose a method of trigger pulse generation to capture the image on time by making a synchronization between the x-ray generator and digital x-ray image acquisition system. we designed a wireless trigger pulse generation circuit to make a synchronization between x-ray generator and digital image acquisition system and analysis its performance. When it starts to detect a certain level of x-ray radiation or above from the air, this method starts to generate a ACQ_START signal to indicate the timing for image acquisition starting from digital image acquisition system. Hence, when it starts to detect under certain level of x-ray signal from the air, this method starts to generate a ACC_END signal to indicate the timing for image acquisition stop from digital image acquisition system. Image acquisition is activated only this time between ACQ_START and ACQ_END signal. By doing this wireless detecting of x-ray signal from remote, we can get more accurate timing for capturing the x-ray image and any type of x-ray generator can be connected to digital image acquisition system, regards of wired protocol. This makes easy installation. We could get 3.5 line pair / mm resolution at 20 mAs of x-ray level with resolution chart. This is same or better image comparing to conventional wired result.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.6
• /
• pp.31-38
• /
• 2009

To improve the image quality and lower the power consumption of the mobile applications, it is the one of the best candidate to control the backlight unit of the LCD module with ambient light. Ambient light sensor and readout circuit were integrated in LCD panel for the mobile applications, and we designed them with LTPS TFT. We proposed noble start-up correction in order to correct the variation of the photo sensors in each panel. We used time-to-digital method for converting photo current to digital data. To effectively merge time-to-digital method with start-up correction, we proposed noble dual slope correction method. The entire readout circuit was designed and estimated with LTPS TFT process. The readout circuit has very simple and stable structure and timing, so it is suitable for LTPS TFT process. The readout circuit can correct the variation of the photo sensors without an additional equipment, and it outputs the 4-levels digital data per decade for input luminance that has a dynamic range of 60dB. The readout rate is 100 times/sec, and the linearity error for digital conversion is less than 18%.