• Journal of the Korean Institute of Telematics and Electronics D
• /
• 제35D권5호
• /
• pp.93-99
• /
• 1998

The chirping characteristics of InGaAsP electroabsorption modulatiors have been analyzed. The effective .alpha. parameters for large signal modulation were estimated by comparing the pulse shape after fiber transmission with constant chirping assumption.We investigated the structure and the operating condition of the modulator to improve the chirping characteristics. The .alpha. parameters were calculated as the function of wavelength detuning and the bias voltage. To minimize the chirping performance, high bias voltage and a small wavelength detuning and the bias voltage. To minimize the chirping performance, high bias voltage and a small wavelength detuning were preferred. An negative .alpha. value is achieved at the wavelength detuning below 30meV with a proper bias voltage so that pulse compression effect was expected.

• Journal of the Optical Society of Korea
• /
• 제6권2호
• /
• pp.33-36
• /
• 2002

We propose a modulation scheme of optical absorption in a coupled asymmetric quantum well (QW) structure via electrically controllable quantum interference. It is based on the parallel-perpendicular energy coupling effect. We show that by applying an external electric Held in the parallel direction (to the QW layers), we can obtain a maximum (peak-type) absorption at a specific wavelength where absorption cancellation would occur due to electrically induced transparency without such an external Held .

• Current Optics and Photonics
• /
• 제7권2호
• /
• pp.127-135
• /
• 2023

Radially polarized beams with the ability to generate a sub-wavelength sized spot in a longitudinal field provides significant applications in microscopic imaging, optical tweezers, lithography and so on. However, this excellent property can also be achieved based on conventional circularly polarized beams. Here, we demonstrate its ability to create a strong longitudinal field by comparing the tight focusing characteristics of fractional-order vortex modulated radial polarized and left-handed circular polarized Bessel-Gauss beams. Additionally, the possibility of generating arbitrary fractional-order vortex modulated Bessel-Gauss beams with a strong longitudinal field is demonstrated. A special modulation method of left-handed circularly polarized Bessel-Gauss beams modulated by a fractional-order vortex is adopted creatively and a series of regulation laws are obtained. Specifically, the fractional-order phase modulation parameter n can accurately control the number of optical lobes. The ratio of the pupil radius to the incident beam waist β₁ can control the radius of the optical lobes. The first-order Bessel function amplitude modulation parameter β₂ can control the number of layers of optical lobes. This work not only adds a new modulation method for optical micromanipulation and optical communication, but also enriches the research on fractional vortex beams which has very important academic significance.

• Journal of the Optical Society of Korea
• /
• 제5권1호
• /
• pp.25-28
• /
• 2001

By using an XPM (Cross Phase Modulation) wavelength converter, an all-optical AND gate, which is one of six fundamental logic gates, has been demonstrated. The wavelengths for probe and pump signals are 1553.8 and 1545 nm, respectively. First, characteristics of the XPM wavelength converter have been studied. When both probe and pump signals are driven by high power, the output power of the XPM wavelength is high. Based on this fact and the experiment, the all-optical AND gate has been porved. Probe and pump signals are transformed to pulse signals by using Mach-Zehnder modulator, which is induced by a pulse generator. Square pulse signals that are similar to the format of NRZ signals have been generated. By coupling two pulse signals into the XPM wavelength converter, AND characteristics in substantiated.

• Advances in nano research
• /
• 제13권5호
• /
• pp.475-485
• /
• 2022

Crystalline silicon photovoltaic cells have advantages of zero pollution, large scale and high reliability. A major challenge is that sunlight wavelength with photon energy lower than semiconductor band gap is converted into heat and increase its temperature and reduce its conversion efficiency. Traditional cooling PV method is using water flowing below the modules to cool down PV temperature. In this paper, the idea is proposed to reduce the temperature of the module and improve the energy conversion efficiency of the module through the modulation of the solar spectrum. A spectrally selective nanofilm reflector located directly on the surface of PV is designed, which can reflect sunlight wavelength with low photon energy, and even enhance absorption of sunlight wavelength with high photon energy. The results indicate that nanofilm reflector can reduce spectral reflectivity integral from 9.0% to 6.93% in 400~1100 nm wavelength range, and improve spectral reflectivity integral from 23.1% to 78.34% in long wavelength range. The nanofilm reflector can reduce temperature of PV by 4.51℃ and relatively improved energy conversion efficiency of PV by 1.25% when solar irradiance is 1000 W/m². Furthermore, the nanofilm reflector is insensitive in sunlight's angle and polarization state, and be suitable for high irradiance environment.

• ETRI Journal
• /
• 제26권4호
• /
• pp.344-350
• /
• 2004

We propose a filter-free wavelength conversion using a Mach-Zehnder interferometer with monolithically integrated $2{\times}2$ multimode interference semiconductor optical amplifiers (MMI-SOAs). The device has been optimized by considering a non-homogeneous carrier distribution due to the self-imaging properties of the MMI-SOA. Static measurements show an extinction ratio of up to 18 dB and an input signal rejection ratio of up to 20 dB.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• 제32A권8호
• /
• pp.119-125
• /
• 1995

Strained multiple quantum well(SMQW) PBH-DFB-LDs emitting at 1.55$\mu$m wavelength has been fabricated using OMVPE and LPE crystal growth tecnique. Using the SMQW active layer, a linewidty enhancement factor of 2.65 was obtained at lasing wavelength and consequnently, packaged 42 modules showed a very low average chirp of 0.44nm at 2.5Gbps NRZ direct modulation. The 77 devices showed average threshold current of 8.72mA and average slope efficiency of 0.181 mW/mA, and single longitudinal mode operation with SMSR larger than 30dB up to 5mW. Among the 77 devices, standard deviation of lasing wavelength of 3.57nm was obtained owing to a good crystal growth uniformity.

• Journal of the Optical Society of Korea
• /
• 제8권4호
• /
• pp.163-167
• /
• 2004

We propose and demonstrate an external optical modulation method based on TE/TM-mode absorption nulls in a Multiple Quantum Well(MQW) Fabry-Perot laser diode(FP-LD). The center wavelength of the absorption nulls is rapidly shifted to short-wavelength by the small current change(~1mA) in the FP-LD, which can modulate an optical signal with more than 10 dB of extinction ratio(ER). The shift of the center wavelength comes from the refractive index change due to anomalous dispersion and the plasma effect in MQW FP-LD waveguide. Non-inverting and inverting signals are made by TE- and TM-mode absorption nulls at 155.52 Mbps and BERs for the signals are measured.

• Korean Journal of Optics and Photonics
• /
• 제9권1호
• /
• pp.20-24
• /
• 1998

Fiber four-wave mixing(FWM) in zero-dispersion wavelength region is studied. FWM efficiency of -26 dBm and bandwidth of 2nm are measured. The linear dispersion slope in zero-dispersion wavelength region is calculated from the modulation behavior of FWM efficiency.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 한국정밀공학회 2007년도 추계학술대회 논문집
• /
• pp.225-226
• /
• 2007