• Journal of the Semiconductor & Display Technology
• /
• v.8 no.3
• /
• pp.7-11
• /
• 2009

In this paper, we developed and presented a design result for optimizing the geometry of Ag circular SPP waveguide for subwavelength waveguide applications. We investigated the effect of the design parameters on the light propagation and find the optimum design for small modal size, high coupling coefficient, and low sensitivity. The results show that the globally optimal design locates optimal waveguide geometries more efficiently than individual optimal points for multivalued objective function.

• Current Optics and Photonics
• /
• v.4 no.6
• /
• pp.551-557
• /
• 2020

A mirror-in-slab waveguide is fabricated on a slab waveguide by using the refractive-index contrast between two materials, with the reflection performance depending on the slab waveguide's design. In this research, a slab waveguide design consisting of silicon (Si) as the core and SiO2 as the substrate was designed and developed to determine the coupling, waveguide, and mirror losses. Based on experimental results, coupling loss is dominant and is affected by the design of the slab waveguide. Furthermore, the mirror loss is affected by the design of the mirror, such as the curvature radius and the size of the mirror. TE and TM polarizations of light are used in the measurements. The experimental results show that mirror losses due to reflection by mirrors are 0.011 dB/mirror and 0.007 dB/mirror for TE and TM polarizations respectively. A simulation was performed to confirm whether the size of mirror is sufficient to reflect the input light, and to check the quality of the surfaces of fabricated mirrors.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.1
• /
• pp.16-26
• /
• 1998

This paper presents a design methodology for magnetically tunable X-band E-plane type waveguide filters. The proposed design is based on using of quarter wavelength transmission line for compensating the negative length transmission line of end K-inverters of E-plane type waveguide filters. The derived formulae are applied for initial design and the correction method is also provided for final design by considering the frequency dependent characteristic of K-inverters. The analysis results of E-plane pype waveguide structure loaded with ferrite slab are obtained using the edge based finite element method including higher order mode effecets. It is shown that the unilateral finline E-plane type waveguide filter as well as the bilateral finline E-plane type waveguide filter achieves the the manetically tunable characteristic. The X-band experimantal results for bilateral and unilateral finline E-plane type waveguide filters agree well with the simulated data.

• 한국정보통신설비학회:학술대회논문집
• /
• 2009.08a
• /
• pp.36-39
• /
• 2009

We developed an optimal design interface based on VBA(Visual Basic Application) that takes advantage of API(Application Program Interface) function of commonly used EM analysis software. The developed interface is adopted for an optimal design of a septum in a waveguide tee junction using PSO(Particle Swarm Optimization) algorithm. The objective function of the optimal design is defined by $S_{11}$-parameter of the waveguide tee junction Design variables are established as position of the septum, that are changed to satisfy the design goal Using the developed design interface and PSO algorithm, the objective function converged to the smallest value, showing the validity of the proposed method. The design interface was developed using Microsoft Excel software, enabling easy control of design parameters for user. Also, various analysis parameters can be set in the Excel interface, including waveguide input mode and frequency. After completion of the design, field solutions at user-specified positrons can be extracted to the output files in complex number form.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.7
• /
• pp.1850-1860
• /
• 1996

We present the results for the design ofantireflection (AR) coatings on facets of a multilayered structure waveguide device. The method, whose results agree very well with the reusults of the rigorous method in the case of a symmetric three layer structure deveice, is extended for the design of AR coatings on the facets of a multilayered structure waveguide device. the field profile in a multilayered structure waveguide necessary for the use of the extended method is obtained from the transfer matrix method. The virtual four layered structure method (VFLM) is proposed to reduce the time for the design ofAR coatings because the time for the design of AR coatings using the extended method increases as the number of layers increases. The optimum coating parameters and tolerance mapsfor two different six layered waveguide devices in Ref. [9] and [10] are obtained using the extendedmethod and the VFLM,and for the three different cases approximated as three layered waveguide devices to compare the results of each case. The results of the VFLM are similar to those of the extended methodcompared to those of the three layered structure waveguide. The main reason for the above results is that the field profile in the device calculated usingthe VFLM is similar to that calculated using the extended method compared to that for three layered structure wavegjide. We conclude that the extended method or VFLM should be used for the design of AR coatings on facets of a deice required for the facet reflectivity less than 10$^{-3}$ such as a semiconductor otical amplifier.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.11a
• /
• pp.481-482
• /
• 2008

This investigation presents a method to design an optimal shape of a matching waveguide connecting two waveguides having different impedances. The design objective is to maximize power transmission through the waveguide system. When an incident wave impinges on an elastic waveguide system consisting of waveguides of different impedances, all of the incident wave power may not pass through due to the mechanical impedance. Therefore, the maximization of the transmitted power through a waveguide difficult to achieve without a systematic design method. In this work, the optimal shape design of a matching waveguide connecting two waveguides of different impedances is formulated as a shape optimization problem. If the material of the matching waveguide is given, its shape is the only parameter controlling the transmission power. Relatively simple one dimensional elastic wave transmission problems will be considered in this work, but the underlying methodology and the related physics can be clearly demonstrated. The influences of initial configurations as well as the target frequencies on the optimized shapes will be also investigated.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.6
• /
• pp.1244-1250
• /
• 1997

An arbitrary shaped iris in rectangular waveguideis investigated using FEM-CDMA with triangularprism elements in this paper. The volume of irisis subdivided into a relatively small number of triangular prism elements and FEM is used to formulate the field distribution. On the other hand, the fields in the waveguide region are represented by BIM derived from the waveguide Green's function and boundary conditions. The proposed method is verified through the design and experiment for the circular iris filter using WR-90 waveguide.

• Journal of electromagnetic engineering and science
• /
• v.4 no.4
• /
• pp.150-155
• /
• 2004

Universal design equations are presented for the H-plane T-junction power divider with a circular conducting post in a rectangular waveguide. For a given operating frequency and power split ratio, the post offset from the T-junction center line, the distance between the post and the waveguide wall, and the post diameter can be adjusted to obtain a minimum reflection at the input waveguide. Optimum values of the post offset are given in terms of the normalized frequency and the power split ratio. Corresponding values of the post diameter and the distance of the post from the waveguide wall are given in terms of the normalized frequency and the post offset.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.10
• /
• pp.1829-1834
• /
• 2008

An optical switch/modulator is designed and the light propagating characteristics is analyzed by the simplified BPM. The distinctive feature of the switch/modulator is that all the waveguide branches are designed to be single-mode. Principle of the device is based on the coupled mode theory in the Y-junction interconnecting waveguide. In spite of all the waveguides are designed to be single-mode, adjusting the interconnecting waveguide length of the device, the same characteristics as existing device up to date is obtainable. Numerical results show that the switching characteristics periodically depends on the interconnecting waveguide length with a spatial of about 150${\mu}m$ in the Ti:LiNbO3 step index waveguide. The concept of design would be utilized effectively in fabricating the monolithic high density of optical integrated circuit.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.04b
• /
• pp.105-108
• /
• 2002

We report on the polarization-insensitive design and fabrication of an arrayed waveguide gratings (AWG's) using sol-gel derived silica glass films formed on fused silica substrates to provide cheap and stable tools for better design. An arrayed-waveguide grating multiplexer with raised structure is fabricated in order to effect polarization sensitivity. Since polarization is usually not known after propagation in an optical fiber. passive WDM components such as monolithic wavelength demultiplexer have to be polarization insensitive. Here, we observed that polarization have effect on crosstalk of output spectrum in arrayed-waveguide grating