• 한국기계연구소 소보
• /
• 통권12호
• /
• pp.63-71
• /
• 1984

A new kind of bulb called Stern-End-Bulb(SEB) for the improvement of the after part of fine hull forms was developed. The reduction of wave resistance and the improvement of the powering performance for the ship with SEB were shown by the ship model tests, At the same time, the characteristics of wave in the vicinity of the stern and the mechanism of the resistance reduction by SEB were investigated. By the systematical variation of the SEB size, the optimum size of SEB was obtained.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제12권1호
• /
• pp.856-867
• /
• 2020

This paper aims to provide the most useful method of determining an optimum LCB position and design direction of fore- and aft-body hull shape for a SLBV. It is known that the SLBV has a lower length-to-beam ratio, larger Cb and simpler stern shape designed for the installation of azimuth thrusters comparing to those of conventional LNG carriers. Due to these specific particulars of SLBV, the optimum LCB position was very different to that of conventional LNG carrier. And various approaches were applied to determine the optimum fore- and aft-body hull shape. The design direction for the optimum hull-form was evaluated as the minimization of the total resistance which includes the wave-making resistance and form-drag with numerical simulation.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제9권6호
• /
• pp.641-654
• /
• 2017

The KVLCC2 and its modified hull form were investigated in regular head waves using Unsteady Reynolds Averaged Navier-Stokes (URANS) methods. The modified KVLCC2 (named KWP-bow KVLCC2) is designed for reducing wave reflection from the bow. Firstly, the original KVLCC2 is studied for verification of the present code and methodology and the computed time history of total resistance and 2DOF motions (heave and pitch) for the selected two wave length conditions are directly compared with the results obtained from KRISO towing tank experiment under the identical condition. The predicted added resistance, heave and pitch motion RAOs show relatively good agreement with the experimental results. Secondly, the comparison of performance in waves between KVLCC2 and KWP-bow KVLCC2 is carried out. We confirmed that newly designed hull form shows better performances in all the range of wave length conditions through both the computation and the experiment. The present URANS method can capture the difference of performance in waves of the two hull forms without any special treatment for short wave length conditions. It can be identified that KWP-bow KVLCC2 gives about 8% of energy saving in sea state 5 condition.

• 대한조선학회논문집
• /
• 제50권2호
• /
• pp.88-94
• /
• 2013

The primary objective of the current work is to obviously analyze regarding effects of trim conditions of a ship on resistance performance using model test and CFD. Model tests at a towing tank are conducted to investigate resistance for trim conditions at the given same displacement. Measured resistance shows small but distinct differences according to trim conditions. However, these differences are difficult to be clarified by measured physical quantities and wave pattern analysis from model tests. CFD is employed for the assessment of resistance performance according to trim conditions. The flow computation is conducted considering free surface and dynamic trim using a commercial CFD code (STAR-CCM+). The initiative of the present work is to systematically demonstrate pressure resistance acting on each region of divided finite zones of ship surface along the length and draught direction of surface when pressure distribution on the ship is interpreted. Also, a standard to assess the pressure resistance applied on the divided regions of a ship is established.

• 대한조선학회지
• /
• 제8권2호
• /
• pp.45-52
• /
• 1971

The object of this study is to determine theoretical ship form which minimises wave making resistance under given conditions and developes theoretical ship form planing. By employing the streamline tracing method 1967's Korean Standard Ship Form of 10,000 G.T. linear has been reformed and tested at towing tank of Inha Institute of Technology. The design process and the reformed ship forms had been reported already in reference[4]. In this paper, resistance performance is experimentally observed with three models(original, theoretical, and reformed form) of 2m long in the towing tank, and total resistance of theoretical and reformed ship forms are decreased by 24.9% and 19.7% and wave making resistance by 66.4% and 47.7% compare to original ship form respectively.

• 한국항해항만학회지
• /
• 제34권10호
• /
• pp.741-746
• /
• 2010

선박이 파랑중을 항행할 경우에는 정수중에 비하여 저항이 증가하기 때문에 예부선의 안정성 확보를 위해 예선의 예인마력과 예인삭의 절단하중 등을 산정할 때에 부선의 정수중 저항값 및 파랑중 저항값을 정확히 추정해야 안전한 예항업무를 이행할 수 있다. 현재 정부에서 제안하고 있는 방법에 의하면 부선의 전저항 산정시 마찰저항, 조파저항, 공기저항은 선체의 형상 및 예선의 속력 등을 고려하여 산정하지만 부가저항은 유의파고에 따라 일률적으로 적용하고 있다. 본 연구에서는 파랑중 부가저항 추정을 위해 수치계산을 실시하여 wigley 선형에 대한 기존의 실험 데이터와 상호 비교함으로서 본 계산법의 유효성을 검증하고, 검증된 수치계산법을 토대로 실무에서 많이 사용되고 있는 두개의 부선 모델을 대상으로 계산을 실행한 결과 부선의 부가저항은 파도와의 만남각에 따라 약 0.3∼1.1톤, 예인속력에 따라 약 0.4∼1.2톤, 선수형상에 따라 약 0.5∼1.1톤으로 차이가 발생함을 확인하였다.

• 대한조선학회지
• /
• 제10권2호
• /
• pp.19-28
• /
• 1973

This paper deals with a problem for determining the bulbous bow ship from which pertains to the study of the theoretical ship form planing method. In this paper has been determined the bulbous bow ship form which is a similar in geometric particulars with the conventional liner ship G.T.10, 000 by adopting the variable method for finding the optimum ship form by A.Y.C. Lee and the streamline tracing method by T. Inui and P.C. Pien. Each resistance performance is examined by the towing test and is compared with one another. The followings are the outcome of this study: Among the 5 type models, the bulbous bow ship form M.S. B 1120 is the most excellent for the resistance performance. The effect for the wave resistance is very sharp according to the difference of the bottom flattening of theoretical ship form. The optimum value of the bulbous bow for wave resistance can be obtained by the variable method mentioned above, and for the series of(Main hull+Bulb)opt., ${\alpha}=75/25$, the value is $f{\approx}0.11$.

• 수산해양기술연구
• /
• 제40권4호
• /
• pp.304-310
• /
• 2004

본 연구에서는 10톤급(9.77 G/T) 소형 연안어선의 저항성능을 회류수조를 이용한 모형시험을 통하여 조사하고, 저항성능개선을 위한 선형특성과 초기 트림에 대한 영향을 검토하였다. 본 연구를 통하여 다음과 같은 몇가지 결론을 도출할 수 있다. (1) 선미 A.P. 이후 돌출부 길이를 키우는 것은, 트림이 억제되면서 선수부 쇄파 현상이 커질 수 있으나, 선미단에서 빠져나가는 유체의 흐름을 개선시켜 저항성능을 크게 향상시킬 수 있다. (2) 적절한 초기 트림을 줌으로써 저항성능이 크게 개선될 수 있다. (3) 선수부 유체흐름을 개선시키기 위해 챠인의 폭을 줄인 선형보다는 이 폭을 그대로 유지하는 것이 파가 선체의 선측을 타고 올라가는 것을 방지하고 트림을 키워 성능측면에서 유리하게 작용한다.

• 수산해양기술연구
• /
• 제53권4호
• /
• pp.446-455
• /
• 2017

The improvement of resistance performance for the 4.99 ton class fishing boats was shown. The 4.99 ton fishing boats are the most commonly used one in the Korean coastal region. The evaluation of resistance performance was estimated by the Computational Fluid Dynamics (CFD) analysis. The CFD simulation was performed by the validation for various types of bow shapes on the hull. The optimized hull form from the simulation was selected and showed the best resistance performance. This hull type was tested on the towing tank in the National Institute of Fisheries Science (NIFS). The effective horsepower (EHP) was estimated by the resistance test on the towing tank with the bare hull condition. The drag force on the three service speed conditions was obtained for the resistance analysis to power prediction. The measured drag forces are compared with the results from the CFD simulation with one another. As results of the model tests, it was confirmed that the shape of the bow is an important factor in the resistance performance. The effective horsepower decreased about 30% in comparison with the conventional hull form. Also, the resistance performance improved the reduction of required horsepower, which especially contributed to the energy-saving for the fisheries industry. In the CFD analysis, the resistance performance improved slightly. In this case, the ratio of the residual resistance ($C_R$) in the total resistance ($C_T$) was high. Therefore, the CFD analysis was not enough to satisfy with reflection for the free surface and wave form in the CFD procedure. Both model test and CFD calculation in this study can be applied to the initial design process for the coastal fishing vessel.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2000년도 추계학술대회 논문집
• /
• pp.261-264
• /
• 2000

Two hull forms of 2, 500 TEU Container Vessel, designed by Daedong Shipbuilding CO., LTD. were tested at the Circulating Water Channel of Chosun University for the evaluation of resistance performance. The test results of resistance, wave profile measurement and trim-sinkage measurement are compared in the form of diagrams and figures, and the results are discussed. A conclusion is drawn that the performance of modified form (model number : CU-201F2A2) is improved about 8% resistance performance at the design speed compare with original form (model number : CU-201F1A1).