• 한국터널지하공간학회 논문집
• /
• 제16권2호
• /
• pp.249-260
• /
• 2014

열차가 고속으로 터널을 진입할 때 압축파가 발생하게 된다. 이 압축파가 터널 출구부에 도달하면 일부는 외부로 방출되고 일부는 팽창파의 형태로 반사되어 터널내부로 전파된다. 이러한 파는 충격파의 형태로 외부로 방출되는데, 이를 미기압(micro pressure wave)이라고 한다. 미기압파는 터널 출구부에 소음 및 진동문제를 일으키며, 이 현상이 클수록 민가 및 주변 유리창에 손상과 거주자의 불안을 일으키는 원인이 된다. 따라서 고속철도 건설을 위해서는 미기압에 대한 대책과 이에 대한 예측이 필요한 실정이다. 이에 본 연구는 운영중인 터널에서의 미기압 측정사례와 터널내 압력기울기에 대한 수치해석을 통하여, 차량의 전두부 형상 및 터널 갱구부 형상에 따른 영향을 분석하였다. 그 결과로, 본 연구에서는 미기압파의 강도를 예측하는 방법을 제시하였으며, 이를 통해서 터널 연장과 단면적에 따른 미기압 강도를 해석하였다.

• 한국암반공학회:학술대회논문집
• /
• 한국암반공학회 2008년도 춘계학술발표회 논문집
• /
• pp.51-68
• /
• 2008

고속열차의 터널 진입시 발생하는 압력파는 압축파의 형태로 터널내부를 전파하여 터널출구에 도달할 때에는 펄스형태의 충격성 압출파로 방사된다. 터널에서 방사된 압축파는 특정한 방향으로 전파되는 것이 아니라 전방향으로 확산되며, 압축파의 크기가 크면 주변 환경에 대한 환경소음 및 진동문제를 야기하게 되는데, 이를 미기압파(Micro Pressure wave)라 한다. 이러한 미기압파는 열차의 주행속도, 터널연장, 터널 및 열차의 단면적 등에 의존하므로 고속철도 터널의 적정단면을 결정하기 위하여 반드시 고려해야 된다. 이에, 본 논문에서는 호남고속철도 단면결정사례를 통하여 단면규모별 수치해석결과에 의한 미기압 기준 만족여부 및 최적단면선정과정을 소개하였다. 호남고속철도의 단면결정사례에서는 경부고속철도 화신 5 터널에서 터널내 압력 및 터널 출구에서의 미기압을 실측하여, 수치시뮬레이션의 입력조건으로 사용된 각종 매개변수 등의 적정성을 비교 검증하였으며, 모형실험을 통하여 합리적인 미기압과 저감대책을 제시하였다.

• 한국분무공학회지
• /
• 제10권1호
• /
• pp.10-16
• /
• 2005

To investigate the effect of shockwave on diesel spray characteristics under ultra high pressure injection, the velocity of spray tip and shock wave were investigated using the visualization of spray by schlieren method. Spray characteristics such as the spray radius, height, and droplets size were analyzed. It is found in this study that shock wave, produced by ultra high injection pressure, propagates faster than spray tip. Spray radius of right side of nozzle tip was shorter than that of left side and spray height of right side of nozzle tip was thicker than that of left side. Droplets sue was increased at 414MPa in injection pressure because of pressure gradient between inner and outer of tile spray caused by shockwave.

• 대한기계학회논문집B
• /
• 제22권6호
• /
• pp.823-831
• /
• 1998

In order to investigate the impulsive noise at the exit of high-speed railway tunnel and the pressure transients inside the tunnel, numerical calculations using a Total Variation Dimishing difference scheme were applied to axisymmetric unsteady compressible flow field. Some compression wave forms were assumed to model the compression wave produced in real high-speed railway tunnel. The numerical data were extensively explored to analyze the peak over-pressure and maximum pressure gradient in the pressure wavefront. The effect of the distance and cross-sectional area ratio between two-continuous ducts on the characteristics of the pressure waves were investigated. The peak over-pressure inside the second duct decreases for the distance and cross-sectional area ratio between two tunnels to increase. The peak over-pressure and maximum pressure gradient of the pressure wavefront inside the second duct increase as the maximum pressure gradient of initial compression wave increases. The present results were qualitatively well agreed with the results of the previous shock tube experiment.

• 대한기계학회논문집B
• /
• 제28권9호
• /
• pp.1042-1050
• /
• 2004

Theoretical study has been conducted to clarify pressure characteristics of KTX(Korea Train eXpress) in tunnel. The severe pressure change in tunnel may give rise to the ear-discomfort for passenger and fatigue for car body. The external and internal pressure of rolling stock have been measured by using the running test with atmospheric pressure sensors and portable data acquisition system in high speed train. In this study, the tunnels from 200m to 4000m in length have been chosen for the investigation of tunnel length effects. We found that there are similar patterns of external pressure change for each critical tunnel length. The critical tunnel lengths are governed by train speed, train length and sonic velocity. And, the patterns of pressure wave in tunnel are classified into eight groups.

• Journal of Biosystems Engineering
• /
• 제37권2호
• /
• pp.113-121
• /
• 2012

Purpose: Particle separation in solution is one of important process in a unit operation as well as in an extract preparation for biosensors. Contrary to centrifuge-type of mesh-type filter, using an ultrasonic standing wave make the filtering process continuous and free from maintenance. It is needed to investigate the characteristics of particle movement in the ultrasonic standing wave field. Methods: Through the computer simulation the effects of major design and driving parameters on the alignment characteristics of particles were investigated, and a cylindrical chamber with up-stream flow type was devised using two circular-shape PZTs on both sides of the chamber, one for transmitting ultrasonic wave and the other for just reflecting it. Then, the system performance was experimentally investigated as well. Results: The speed of a particle to reach pressure-node plane increased as the acoustic pressure and size of particle increased. The maximum allowable up-stream flow rate could be calculated as well. As expected, exact numbers of pressure-node planes were well formed at specific locations according to the wavelength of ultrasonic wave. As the driving frequency of PZT got close to its resonance frequency, the bands of particles were observed clearer, which meant the particles were trapped into narrower space. Higher excitation voltages to the PZT produced a greater acoustic force with which to trap particles in the pressure-node planes, so that the particles gathered could move upwards without disturbing their alignments even at a higher inlet flow rate. Conclusions: This research showed the feasibility of particle separation in solution in the continuous way by an ultrasonic standing wave. Further study is needed to develop a device to collect or harvest those separated particles.

• 대한토목학회논문집
• /
• 제35권1호
• /
• pp.119-128
• /
• 2015

본 연구에서는 파일지지식 소파방파제의 파압특성을 2차원 수리모형실험을 통해 분석하였다. 단일 유공벽 및 이중 유공벽을 가진 모형체를 통해 실험을 수행하였으며, 측정된 파압결과는 Goda 파압과 비교분석하였다. 단일 유수실의 경우, 측정된 최대파압이 Goda 파압과 비교하여 전면벽의 경우 25%, 후면벽의 경우 30%가 감소하였다. 이중 유수실의 경우에는 최대파압이 Goda 파압대비 전면벽 27%, 중간벽 53%, 후면벽 64% 감소한 것을 알 수 있다. 이로부터 이중 유공벽을 가진 소파방파제가 단일 유공벽의 경우와 비교하여 파압이 현저히 감소하는 것을 알 수 있었으며, 이는 유공 1실과 2실의 횡슬릿의 유공벽을 통과하면서 발생하는 파랑에너지의 소산으로 인해 후면벽에 작용하는 파압의 크기가 작아졌기 때문으로 판단된다.

• 한국자동차공학회논문집
• /
• 제12권6호
• /
• pp.111-118
• /
• 2004

The work presented in this paper concerns the aerodynamic characteristics and compression wave generated in a tunnel when a high speed train enters it. A large number of solutions have been proposed to reduce the amplitude of the pressure gradient in tunnels and some of the most efficient solutions consist of (a) addition ofa blind hood, (b) addition of inclined part at the entrance, and (c) holes in the ceiling of the tunnel. These are numerically studied by using the three-dimensional unsteady compressible Euler equation solver with ALE, CFD code, based on FEM method. Computational results showed that the smaller inclined angle leads to the lower pressure gradient of compression wave front. This study indicated that the most efficient slant angle is in the range from $30^{\circ}$ to $50^{\circ}$. The maximum pressure gradient is reduced by $26.81\%$ for the inclined angle of $30^{\circ}$ as compared to vertical entry. Results also showed that maximum pressure gradient can be reduced by $15.94\%$ in blind hood entry as compared to $30^{\circ}$ inclined tunnel entry. Furthermore, the present analysis showed that inclined slant angle has little effect on aerodynamic drag. Comparison of the pressure gradient between the inclined tunnel hood and the vertical entry with air vent holes indicated that the optimum inclined tunnel hood is much more effective way in reducing pressure gradient and increasing the pressure rise time.

• 한국자동차공학회논문집
• /
• 제12권2호
• /
• pp.109-116
• /
• 2004

Bent-axis piston pump have been commonly used in hydraulic systems because of high pressure level, best efficiency, low shear force on pistons and low operating costs. The other side, they have a few demerits like that they have the relatively high number of moving parts and more discharge pressure ripples. Especially, the discharge pressure ripples bring about vibrations and noises in hydraulic system components such as connecting pipes and control valves, so that these deteriorate the stability and accuracy of the systems. Therefore, the hydraulic systems having the bent-axis piston pump require the methods to reduce the discharge pressure ripples. So, the purpose of this paper is to reduce the discharge pressure ripples by the phase interference of pressure wave and to develope the analysis model of the pumps to predict the discharge pressure ripples. In this paper, the analysis model of the bent-axis piston pump was developed using the AMESim software, and the reliability of that was verified by the comparison with the experimental results. The hydraulic pipeline with a parallel line was used as the method to generate the phase interference of pressure wave. the dynamics characteristics of the hydraulic pipeline with a parallel line were analyzed by a transfer matrix method. the usefulness of the phase interference of pressure wave was investigated through the experiment and simulation. The results from the experiment and simulation said that the phase interference of pressure wave by the hydraulic pipeline with a parallel line could reduce the discharge pressure wave of the pump well. The analysis model of the bent-axis piston pump developed in this paper and the method of the phase interference by the hydraulic pipeline with a parallel line are expected to be helpful to achieve the design of the pump and to reduce the discharge pressure wave of the pump effectively.

• 한국해안·해양공학회논문집
• /
• 제34권3호
• /
• pp.82-92
• /
• 2022

최근 들어 건설되는 해안·항만구조물의 경우 구조물 마루에 상치구조물 설치를 통해 월파의 발생을 방지하거나 친수공간을 확보하려는 시도가 증가하고 있다. 일반적으로 설계단계에서 상치구조물에 작용하는 파압 산정은 설계파의 처오름을 고려하여 구조물의 전면에 작용하는 Goda 파압식을 적용하고 있다. 하지만, 내습파랑이 구조물의 마루를 월파하는 경우 상치구조물의 설치위치에 따라 Goda 파압을 상회하는 파압이 작용할 수 있다. 본 연구에서는 직립 케이슨을 대상으로 수리모형실험 및 수치모의를 통해 상치구조물에 작용하는 파압산정에 대한 Goda 파압식의 적용성을 분석함과 동시에 상세한 수치모델결과를 기반으로 상치구조물에 작용하는 파압의 크기를 고찰하였다. 그 결과, 상치구조물에 작용하는 파압은 정수면에 작용하는 최대파압에 비해 최대 120%까지 발생함을 확인하였다. 또한, 이러한 상치구조물의 작용파압은 구조물 마루에서 월파수심에 따른 Froude number에 지수함수적으로 증가함을 확인하였으며 Froude number에 기반한 파압의 예측을 위한 경험식을 제안하였다.