• 대한조선학회지
• /
• 제18권1호
• /
• pp.19-27
• /
• 1981

The surge motion of a freely-floating sphere in a regular wave is studied within the framework of a linear potential theory. The fluid is assumed to be perfect and only the steady-state harmonic motion in a water of infinite depth is considered. A velocity potential describing the fluid motion is decomposed into three parts; the incident wave potential, the diffraction potential and the radiation potential. In this paper the diffraction potential and the radiation potential are analysed by using multipole expansion method. Upon calculating pressures over the immersed surface of the sphere, the hydrodynamic forces are evaluated in terms of Froude-Krylov, diffraction, added mass and damping forces as functions of the frequency of the incident wave. Finally the frequency dependence of two pertinent parameters, the amplitude ratio and the phase lag between the motion of the sphere and that of the incident wave is derived from the equation of motion. As for numerical results the general tendency of the present calculation shows good agreement with Kim's work who also treated this problem utilizing the Green's function method.

• 대한조선학회지
• /
• 제12권1호
• /
• pp.47-58
• /
• 1975

The effect of the bow shape on the ship motion response among longitudinal regular waves, is investigated employing the strip theory. The two dimensional hydrodynamic forces such as added mass and damping are calculated by the integral equation method for arbitrary sections. Nine ship models are selected for investigation. They are U, UV and V bow ship forms of different block coefficient of 0.6, 0.7 and 0.8 with constant after body. The heave amplitude of the V bow ship is smaller than that of the U bow ship in the whole range of wave length except extremely short wave as were stated by the earlier investigators. This results holds also in the case of bow vertical motions such as vertical relative displacement, velocity and acceralation. As to the pitch amplitudes, the V bow ship gives smaller value in long waves but larger value in short waves. However, heave and pitch phase angles are practically not influenced by the form of the fore body sections. In the bow motions, a little difference in phase angle is appeared in the vicinity of the wave which has same ship length. With respect to the wave exiting force and moment unfovourable effects could be expected in V bow ships. And these tendency hold also in the wave bending moment.

• 한국해양공학회지
• /
• 제18권6호
• /
• pp.16-21
• /
• 2004

This study presents the wave forces for spar platforms. The advantage of a spar platform is that it is easy to manufacture and has excellent to motion characteristics. It is important to precisely determine the wave force acting on spar platforms for their basic design of them. We measur the wave exciting force for both the classic spar and truss spar models, and accomplish the numerical calculation using diffraction theory. The results show that experimental values have good agreement with theoretical values. However it is difficult to accurately estimate the value considering the heave plate of truss spar due to the viscosity.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2002년도 추계학술대회 논문집
• /
• pp.261-266
• /
• 2002

This study presents the wave forces for spar platforms. The advantage of spar platform is that it is easy to manufacture and excellency to motion characteristics. It is important to estimate exactly wave force acting spar platforms for basic design of them. We measured the wave exciting force for classic spar and truss spar model, and accomplished the numerical calculation using diffraction theory. The results show that experimental values are good agreement with theoretical values. But it is difficult to estimate accurate value considering the heave plate of truss spar due to the viscosity.

• 한국지진공학회논문집
• /
• 제28권5호
• /
• pp.249-255
• /
• 2024

Strong ground motions at specific sites can cause severe damage to structures. Understanding the influence of site characteristics on the dynamic response of structures is crucial for evaluating their seismic performance and mitigating the potential damage caused by site effects. This study investigates the impact of the average shear wave velocity, as a site characteristic, on the seismic response of low-to-medium-rise reinforced concrete buildings. To explore them, one-dimensional soil column models were generated using shear wave velocity profile from California, and nonlinear site response analyses were performed using bedrock motions. Nonlinear dynamic structural analyses were conducted for reinforced concrete moment-resisting frame models based on the regional information. The effect of shear wave velocity on the structural response and surface ground motions was examined. The results showed that strong ground motions tend to exhibit higher damping on softer soils, reducing their intensity, while on stiffer soils, the ground motion intensity tends to amplify. Consequently, the structural response tended to increase on stiffer soils compared to softer soils.

• 한국항공우주학회지
• /
• 제36권1호
• /
• pp.62-71
• /
• 2008

액체로켓엔진에서 발생하는 고주파 연소불안정을제어하기 위하여 인젝터의 길이 변화를 줄 수 있는 다중 스월 인젝터의 감쇠효과를 분석하였다. 음향흡수자로서 인젝터의 효과를 분석하기 위하여 인젝터는 1/4 파장 공명기로 해석하였고, 상온에서 감쇠 효과의 적합성을 검증하였다. 인젝터 내부에 형성되는 air core의 부피가 감쇠 효과에 직접적인 영향을 주므로 이를 모사한 다수의 튜브로 실험을 하였다. 실험을 통해 각 모드의 배(anti-node point)에 장착된 인젝터의 수의 증가로 감쇠 효과가 커지는 것을 확인하였다. 또한 1L, 1T, 1L1T 모드에 동조된 인젝터들을 동시에 각 모드의 배에 장착했을 경우, 각 모드에서 단일 모드에 튜닝된 인젝터들을 장착하였을 경우와 거의 같은 감쇠 효과를 얻을 수 있었다.

• Structural Engineering and Mechanics
• /
• 제40권4호
• /
• pp.453-469
• /
• 2011

A one-story, wooden-frame, intermediate-bay model with Dou-Gon designed according to the Building Standards of the Song Dynasty (A.D.960-1279), was tested on a unidirectional shaking table. The main objectives of this experimental study were to investigate the seismic performance of Chinese historic wooden structure under various base input intensities. El Centro wave (N-S), Taft wave and Lanzhou wave were selected as input excitations. 27 seismic geophones were instrumented to measure the real-time displacement, velocity and acceleration respectively. Dynamic characteristics, failure mode and hysteretic energy dissipation performance of the model are analyzed. Test results indicate that the nature period and damping ratio of the model increase with the increasing magnitude of earthquake excitation. The nature period of the model is within 0.5~0.6 s, the damping ratio is 3~4%. The maximum acceleration dynamic magnification factor is less than 1 and decreases as the input seismic power increases. The frictional slippage of Dou-Gon layers (corbel brackets) between beams and plates dissipates a certain amount of seismic energy, and so does the slippage between posts and plinths. The mortise-tenon joint of the timber frame dissipates most of the seismic energy. Therefore, it plays a significant part in shock absorption and isolation.

• 한국해안·해양공학회논문집
• /
• 제21권5호
• /
• pp.410-418
• /
• 2009

선형포텐셜이론을 가정하여 부분 반사 안벽 앞에 계류된 부유체의 동유체력과 운동응답을 해석할 수 있는 경계요소법을 개발 적용하였다. 동유체력인 부가질량과 감쇠계수는 부유체의 잠긴깊이와 안벽에서의 반사율 그리고 부유체와 안벽사이의 떨어진 거리에 밀접한 관련이 있다. 특히 안벽에서의 반사율은 안벽과 부유체사이의 제한유체영역내에서 발생하는 공진현상에 의하여 증폭된 운동변위의 피크값을 줄이는 등 운동응답에 중요한 영향을 미친다. 개발된 수치해석법은 부유체의 형상, 입사각, 안벽의 속성, 입사파의 특성 등의 변화에 따른 부유체의 운동성능을 평가하는데 이용될 것이며, 또한 항만내 계류된 선박의 운동특성을 고려한 항만설계의 기초자료로 활용 될 것이다.

• 한국지반공학회논문집
• /
• 제31권4호
• /
• pp.45-55
• /
• 2015

발파에 대한 주변 구조물이나 사면의 안정성은 경험적 진동감쇠식 또는 발파진동 동적 수치해석을 통하여 평가한다. 동적해석을 수행하기 위해서는 발파하중과 지반 감쇠비의 산정이 필요하다. 발파하중에 대해서는 다양한 경험적 방법이 제시되었지만 암반의 감쇠비에 대한 연구는 제한적이며 해석 시 이를 무시하거나 명확한 근거 없이 가정하여 해석에 적용하고 있다. 암반의 감쇠비는 절리의 영향을 크게 받으므로 이를 고려해서 산정해야 한다. 또한, 평면파로 가정할 수 있는 지진파와는 다르게 발파 시에는 구면파가 생성되며 이를 2차원 해석에서 모사하는 경우에는 이의 기하학적 확산을 고려하기 위하여 감쇠비를 조정해야 한다. 본 연구에서는 위의 두 가지 영향이 고려된 2차원 평면변형률 연속체 해석에 적용 가능한 암반의 등가감쇠비를 제안하였다. 이를 위하여 다양한 강성의 암반에 대한 2차원 동적해석을 수행하여 암반의 감쇠비에 따른 진동전파 특성을 분석하였으며 해석결과를 기반으로 진동감쇠식-전단파속도-등가감쇠비와의 상관관계를 규명하였다. 제시된 상관관계는 경험적 진동감쇠식에 상응하는 감쇠비를 산정한 최초의 시도로 중요한 의미가 있으며 동시에 실무에도 쉽게 적용될 수 있는 유용한 방법이다.

• Wind and Structures
• /
• 제22권1호
• /
• pp.107-131
• /
• 2016

The need for a more affordable, reliable, clean and secure energy has led to explorations in non-traditional sources, particularly renewable energies. Wind is one of the cleanest energy sources that plays a significant role in augmenting sustainability. Wind turbines, as energy convertors, are usually tall and slender structures, and depending on their location (inland or offshore), they can be subject to high wind and/or strong wave loadings. These loads can cause severe vibrations with detrimental effects on energy production, structural lifecycle and initial cost. A dissipativity analysis study was carried out to know whether wind turbine towers require damping enhancement or rigidity modifications for vibration suppression. The results suggest that wind turbines are lightly damped structures and damping enhancement is a potential solution for vibration lessening. Accordingly, the paper investigates different damping enhancement techniques for vibration mitigation. The efficacy of tuned mass damper (TMD), tuned liquid column damper (TLCD), tuned sloshing damper (TSD), and viscous damper (VD) to reduce vibrations is investigated. A comparison among these devices, in terms of robustness and effectiveness, is conducted. The VD can reduce both displacement and acceleration responses of the tower, better than other types of dampers, for the same control effort, followed by TMD, TSD, and finally TLCD. Nevertheless, the use of VDs raises concerns about where they should be located in the structure, and their application may require additional design considerations.