• The Journal of the Convergence on Culture Technology
• /
• v.9 no.3
• /
• pp.769-777
• /
• 2023

Globalization has brought about rapid economic, technological, and cultural changes. In order for countries around the world to communicate, recognize and understand globalization, creativity or planning ability can be used to code. In this paper, we would like to present and prove a data analysis that can solve world problems. In the global market, the value of goods or services increases with connectivity. This connection is becoming one of the factors that increase the value of culture. Changes taking this into account promoted cultural spread and innovative growth, and increased productivity and competitiveness in each region of the world. This paper compares the income of the middle class in the United States on the impact of globalization and anti-globalization on cultural spread and innovative growth. Globalization has created an environment in which various elements of K-culture can interact and spread. Through the Internet, social media, and international travel, globalization has had a positive impact on Korea's innovative growth. In areas such as economic activity, technological innovation, and creative industries, globalization has facilitated new tech and approaches, Through this, it changed the existing economic model and contributed to exports K-culture with a new middle class model. However, globalization in the cultural industry can result in the loss of regional characteristics & individuality, which can lead to the middle class cultural unification and alienation(chasm). As a result of the empirical analysis of K-exports for the middle income in the United States, cultural diffusion and innovation must be developed even in anti-globalization. With these industrial changes the soft power value of the Korean Wave proves that it can create value for use for the middle class of major exporting countries.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.4A
• /
• pp.347-353
• /
• 2009

The qualitative factors influencing the ingress of chloride ion into concrete are water-binder (W/B) ratio, cement type, age, chloride ion concentration of given environment, wet and dry conditions, etc. Thus, an objective of this experimental research is to investigate the effects of cement types and environmental conditions on the chloride ion diffusion characteristics in concrete through the chloride ion diffusion test. For this purpose, the diffusion coefficients for chloride ion in concrete with three types of cement such as ordinary portland cement (OPC), binary blended cement (BBC), and ternary blended cement (TBC), were measured for the concrete specimens with W/B ratios of 32%, 38%, and 43%, respectively. The diffusion coefficients for chloride ion were also measured for the concrete specimens with W/B ratio of 43%, which were subjected to standard curing and field exposure conditions. It was observed from the test results that the resistance against chloride ion penetration increased with decreasing W/B ratio and those of BBC and TBC concretes were greater than that of OPC concrete. Therefore, it was revealed that the use of these cements containing mineral admixtures is required to extend the service life of RC structures exposed to chloride environment. On the other hand, it was noted that the resistance against chloride ion penetration of field exposure test specimens was slightly lower than that of standard curing test specimens due to the penetration of chloride ion under the irregular ambient temperature, splash of wave, and cycle of wet and dry.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.3C
• /
• pp.141-148
• /
• 2010

Electrical noises like self potential, burst noises and 60-Hz electrical noises are one of the causes to reduce reliability of electrical resistivity survey. Even the PDC-R (Pseudo DC resisitivity) technique, recently developed, is suffering from the problem of low reliability due to electrical noises. That is, both DC-based and AC-based resistivity technique is subject to reliability problem due to electrical noises embedded in urban geotechnical sites. In this research, a new technique to enhance reliability of the PDC-R technique by minimizing influence of electrical noises was proposed. In addition, an automated procedure was also proposed to facilitate data analysis and interpretation of PDC-R measurements. The proposed technique is composed of two steps: 1. to extract information only related with the input current by means of multiple-filter technique, and 2. to undertake a task to sort out signal information only to show stable and reliable characteristics. This automated procedure was verified by a synthetic harmonic wave including DC shift, burst random noises and 60-Hz electrical noises. Also the procedure was applied to site investigation at urban areas for proving its feasibility and accuracy.

• Convergence Security Journal
• /
• v.23 no.2
• /
• pp.47-54
• /
• 2023

The global popularity of K-content(Korean Wave) has led to a continuous increase in copyright infringement cases involving domestic works, not only within the country but also overseas. In response to this trend, there is active research on technologies for detecting illegal distribution sites of domestic copyrighted materials, with recent studies utilizing the characteristics of domestic illegal distribution sites that often include a significant number of advertising banners. However, the application of detection techniques similar to those used domestically is limited for overseas illegal distribution sites. These sites may not include advertising banners or may have significantly fewer ads compared to domestic sites, making the application of detection technologies used domestically challenging. In this study, we propose a detection technique based on the similarity comparison of links and text trees, leveraging the characteristic of including illegal sharing posts and images of copyrighted materials in a similar hierarchical structure. Additionally, to accurately compare the similarity of large-scale trees composed of a massive number of links, we utilize Graph Neural Network (GNN). The experiments conducted in this study demonstrated a high accuracy rate of over 95% in classifying regular sites and sites involved in the illegal distribution of copyrighted materials. Applying this algorithm to automate the detection of illegal distribution sites is expected to enable swift responses to copyright infringements.

• 한국노년학
• /
• v.39 no.1
• /
• pp.93-108
• /
• 2019

The purpose of this study is to examine the effect of absolute / relative poverty on the life satisfaction focusing on mediation effect of subjective social status by type of elderly residents. In order to analyze the distinct characteristics of the elderly, analysis was conducted with 3,327 the elderly living together and 668 the elderly living alone using 'Korean Longitudinal Study of Ageing(KLoSA)' from 3rd to 5th wave data provided by the Korea Employment Information Service. The main analysis results are as follows. First, each poverty rate for the elderly living together accounted for 43.5 percent and 51.4 percent, while 63.8 percent and 77.2 percent for the elderly living alone respectively. Second, life satisfaction was higher among the elderly living together than living alone, However, life satisfaction was not related to condition of poverty among the elderly living alone. Third, absolute / relative poverty were associated with life satisfaction of the elderly living together, and subjective social status had a mediating effect. However, relative poverty was not related to life satisfaction among the elderly living alone, which indicated that it needs to support not only the financial approach to overcome absolute poverty but also the multi-dimensional poverty perspective in the intervention of the elderly living alone Based on the results, the study suggested to make a tool to measure of poverty using multi-dimensional poverty indicators.

• Journal of Venture Innovation
• /
• v.5 no.2
• /
• pp.85-99
• /
• 2022

Dryers becoming commercially available for experimental and industrial use are classified to general drying oven, hot-air dryer, vacuum dryer, freezing dryer, etc. and kinds of them are various from the function, size and volume, etc. But the moisture measurement is not applied although it is important factor for the quality control and the performance improvement of products, and then now is very passive because the weight is weighed arbitrarily after dry-end. Generally the method for measuring moisture is divided by a direct measurement method and a indirect measurement method, and the former such as the change of weight or volume on the front and rear of separation of moisture, etc. is mainly used. Relatively a indirect measurement is very limited to apply due to utilize measurement apparatuses using temperature conductivity and micro-wave etc. In this research, we easily designed the moisture measurement system using the open-source based Arduino, and monitored moisture fluctuations and weight profiles in the real-time without the effect of external environment. Concretely the temperature-humidity and load cell sensors were packaged into a drying oven and the various change values were measured, and their sensors capable to operate 60℃ and 80℃ were selected to suitable for the moisture sensitive materials and the food dry. And also the performance safety using the organic samples of banana, pear, sawdust could be secured because the changes of evaporation rate as the dry time and temperature, and the measurement values of load cell appeared stable response characteristics through repeated experiments. Hereafter we judge that the reliability can be improved increasingly through the expansion of temperature-humidity range and the comparative analysis with CFD(Computational Fluid Dynamics) program.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.6
• /
• pp.704-711
• /
• 2023

This paper discusses the control method of BLDC(Brushless Direct Current) motor that has similar electrical characteristics with DC motor but has improved its lifespan and reliability. The BLDC motor can improve durability and speed stability by using rotor position information to eliminate commutators that require mechanical contact with DC motors. In this study, a controller for a DC motor was designed based on the fact that the current in the windings of a BLDC motor is a square-wave current like the current flowing in the armature of a DC motor. Next, the designed controller was applied to a 3-phase BLDC motor to confirm the effectiveness of the controller. In detail, a single-phase DC motor with electrical parameter values of a three-phase BLDC motor was modeled and a PI controller for motor speed control was designed by applying the root locus method to the derived system. The speed control simulation of the DC motor was performed to confirm the validity of the controller, and the same controller was applied to the speed control of the 3-phase BLDC motor implemented in MATLAB. From the simulation, similar results of the DC motor were obtained in the 3 phase BLDC motor and confirmed the usefulness of the proposed control scheme.

• Journal of Advanced Navigation Technology
• /
• v.27 no.4
• /
• pp.447-452
• /
• 2023

In this paper, gain enhancement of a double dipole quasi-Yagi antenna using a meanderline array structure was studied. A 4×1 meanderline array structure consisting of a meanderline conductor- shaped unit cell is located above the second dipole of the double dipole quasi-Yagi antenna. It was designed to have gain over 7 dBi in the frequency range between 1.70 and 2.70 GHz in order to compare the performance with the case using a conventional strip director. As a result of comparison, the average gain of the double dipole quasi-yagi antenna with the proposed meander line array structure was larger compared to the case with the conventional strip director. A double dipole quasi-Yagi antenna using the proposed meanderline array structure was fabricated on an FR4 substrate and its characteristics were compared with the simulation results. Experiment results show that the frequency band for a VSWR less than 2 was 1.55-2.82 GHz, and the frequency band for gain over 7 dBi was measured to be 1.54-2.83 GHz. The frequency bandwidth with gain over 7 dBi increased, and average gain also slightly increased, compared to the conventional case using a strip director.

• Journal of Navigation and Port Research
• /
• v.46 no.6
• /
• pp.483-490
• /
• 2022

Floating LiDAR is a system that provides a new paradigm for wind condition observation, which is essential when creating an offshore wind farm. As it can save time and money, minimize environmental impact, and even reduce backlash from local communities, it is emerging as the industry standard. However, the design and verification of a stable platform is very important, as disturbance factors caused by fluctuations of the buoy affect the reliability of observation data. In Korea, due to the nation's late entry into the technology, a number of foreign equipment manufacturers are dominating the domestic market. The west coast of Korea is a shallow sea environment with a very large tidal difference, so strong currents repeatedly appear depending on the region, and waves of strong energy that differ by season are formed. This paper conducted a study examining buoys suitable for LiDAR operation in the waters of Korea, which have such complex environmental characteristics. In this paper, we will introduce examples of optimized design and verification of ship-type buoys, which were applied first, and derive important concepts that will serve as the basis for the development of various platforms in the future.

• Journal of Korea Water Resources Association
• /
• v.56 no.spc1
• /
• pp.1027-1036
• /
• 2023

Coastal topographic information is crucial in coastal management, but point measurment based approeaches, which are labor intensive, are generally applied to land and underwater, separately. This study introduces an efficient method enabling land and undetwater surveys using an unmanned aerial vehicle (UAV). This method involves applying two different algorithms to measure the topography on land and water depth, respectively, using UAV imagery and merge them to reconstruct whole coastal digital elevation model. Acquisition of the landside terrain is achieved using the Structure-from-Motion Multi-View Stereo technique with spatial scan imagery. Independently, underwater bathymetry is retrieved by employing a depth inversion technique with a drone-acquired wave field video. After merging the two digital elevation models into a local coordinate, interpolation is performed for areas where terrain measurement is not feasible, ultimately obtaining a continuous nearshore terrain. We applied the proposed survey technique to Jangsa Beach, South Korea, and verified that detailed terrain characteristics, such as berm, can be measured. The proposed UAV-based survey method has significant efficiency in terms of time, cost, and safety compared to existing methods.