• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.1
• /
• pp.231-236
• /
• 2017

The space harmonics generated by a plane-wave incident upon a multi-layered dielectric grating can undergo strong resonance scattering variations known as GMR(guided-mode resonance). To clarify these effects, we examine the field propagation and dispersion curve inside the grating region by using a rigorous equivalent transmission-line theory(RETT). The results show that, at the peak of a scattering resonance, the reflected mode is almost identical to a leaky wave that can be supported by the grating structure. Thus, we confirm and generalize previous research that has occurred GMR effect associated with the free-resonant character of leaky waves at multi-layered dielectric gratings. Quantitative simulation results illustrating the behavior of typical gratings are given, and the special case of normal incidence is discussed for TM mode.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.4
• /
• pp.1-7
• /
• 1997

This paper presents an analysis of the wave propagation in cross-type tunnels using the finite volume time domain (FVTD) method. Because the FVTD method is based on the volume intergrations of themaxwell's equations with respected to arbitrary shaped small polyhedron cells and the fields at every center point of the cells ar eassigned in a average fashion, the method can handle arbitrary boundary problems with inhomogeneous media. In this paper, the wave propagation in cross-type tunnels has been analyzed using the fVTD method with the PML (perfectly matched layer) absorbing bundary conditons, and the numerical results are verified with a set of experimental data.

• Applied Microscopy
• /
• v.38 no.1
• /
• pp.63-72
• /
• 2008

The iterative wave-function reconstruction (IWFR) method developed by Allen et al. (2004) was reviewed with concern for its applicability. The high resolution transmission electron microscopy (HRTEM) studies of the materials such as GaAs, $YBa_2Cu_3O_7$ and $Al_2CuMg$ reported in the literature were utilized in this review. In this process the basis of validity, the limiting conditions and the information limit of this method were discussed. It was particularly noted that the phase contrast image of the exit plane wave evaluated from this method reveals not only $C_s$-corrected atomic resolution within information limit, but also strong tendency of contrast proportional to the magnitude of the atomic number of compositional atoms in a crystal.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.4
• /
• pp.74-81
• /
• 2004

The ultrasonic non-destructive method was used for wood decay test. The temperature change and moisture contents of wood were estimated how the ultrasonic wave velocity changes. The relationship between weight loss of wood decayed by T. palustris and ultrasonic wave velocity was investigated. The non-destructive methods of different condition of logwood were estimated. Decay map of old wood was made by non destructive methods. Through these tests, we can accumulate the data to judge the degree of wood decay. The decay map of wood could be used for the analysis of old wood.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.16 no.4
• /
• pp.1209-1223
• /
• 2022

Blood pressure is one of the key physiological parameters for determining human health, and can prove whether human cardiovascular function is healthy or not. In general, what we call blood pressure refers to arterial blood pressure. Blood pressure fluctuates greatly and, due to the influence of various factors, even varies with each heartbeat. Therefore, achievement of continuous blood pressure measurement is particularly important for more accurate diagnosis. It is difficult to achieve long-term continuous blood pressure monitoring with traditional measurement methods due to the continuous wear of measuring instruments. On the other hand, radar technology is not easily affected by environmental factors and is capable of strong penetration. In this study, by using machine learning, tried to develop a linear blood pressure prediction model using data from a public database. The radar sensor evaluates the measured object, obtains the pulse waveform data, calculates the pulse transmission time, and obtains the blood pressure data through linear model regression analysis. Confirm its availability to facilitate follow-up research, such as integrating other sensors, collecting temperature, heartbeat, respiratory pulse and other data, and seeking medical treatment in time in case of abnormalities.

• Steel and Composite Structures
• /
• v.45 no.1
• /
• pp.119-131
• /
• 2022

Due to the complexity of the structure and the limits of classical SEA, a combined SEA approach is employed, with angle-dependent SEA in the low- and mid-frequency ranges and advanced SEA (ASEA) considering indirect coupling in the high-frequency range. As an important component of the steel box girder, the dynamic response of an L-junction periodic ribbed plate is calculated first by the combined SEA and validated by the impact hammer test and finite element method (FEM). Results show that the indirect coupling due to the periodicity of stiffened plate is significant at high frequencies and may cause the error to reach 38.4 dB. Hence, the incident bending wave angle cannot be ignored in comparison to classical SEA. The combined SEA is then extended to investigate the vibration properties of the steel box girder. The bending wave transmission study is likewise carried out to gain further physical insight into indirect coupling. By comparison with FEM and classical SEA, this approach yields good accuracy for calculating the dynamic responses of the steel box girder made of periodic ribbed plates in a wide frequency range. Furthermore, the influences of some important parameters are discussed, and suggestions for vibration and noise control are provided.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.16 no.1
• /
• pp.45-51
• /
• 2008

This paper presents theoretical and experimental analysis on the characteristics of the power spectrum of electormagnetic waves radiating from the spark plug and their cables of a distributorless ignition system. The theoretical study was conducted applying the microwave transmission line theory and the antenna theory. The experimental works were carried out to measure the standing wave ratio(SWR) and the radiation power spectrum of this system. As a result, it has been found that a spark plug and its cable is working as a monopole antenna radiating elelctromagnetic waves. Because of its similar structure to a monopole antenna, the envelope of radiation power spectrum distribution has a bell shape which can be obtained from a monopole antenna operating as a series resonant circuit. The frequency characteristics from the SWR measurements show a similar frequency characteristics of power spectrum of the system studied. Also, it has been found that the density of the power spectrum of the system fitting a long time used spark plug is higher than that of fitting a new spark plug.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.761-764
• /
• 2007

This paper addresses the analysis and the design optimization of differential interconnects for Low-Voltage Differential Signaling (LVDS) applications. Thanks to the differential transmission and the low voltage swing, LVDS offers high data rates and improved noise immunity with significantly reduced power consumption in data communications, high-resolution display, and flat panel display. We present an improved model and new equations to reduce impedance mismatch and signal degradation in cascaded interconnects using optimization of interconnect design parameters such as trace width, trace height and πace space in differential flexible printed circuit board (FPCB) transmission lines. We have carried out frequency-domain full-wave electromagnetic simulations, time-domain transient simulations, and S-parameter simulations to evaluate the high-frequency characteristics of the differential FPCB interconnects.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.14 no.1
• /
• pp.76-85
• /
• 2002

The floating breakwater generally has an excellent water exchanging capability, but with some lowering harbor tranquility due to the wave transmission underneath floating body. In the initial stage of design, it is thus required to investigate several alternatives of breakwater layout for their performance of harbor tranquility. The present study aims to formulate a sort of reflection-transmission boundary condition of floating breakwater so that the existing numerical method using time dependent mild slope equation can still be applied to the case of floating breakwaters. The two and three dimensional tests were each performed to demonstrate the performance of the boundary condition. It was found that the reflection and transmission characteristics around the breakwater were well reproduced by the boundary condition. Finally, the reflection-transmission boundary condition were applied to a floating breakwater installed in an imaginary harbor with an irregular shape and bottom topography. The results surely showed that the present numerical method can effectively used in practical works related to the real sea construction of floating breakwaters.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.8
• /
• pp.1599-1605
• /
• 2012

We introduced an approach of modeling of a sound absorbing medium that had different absorbing coefficient according to frequency. To obtain the time domain result of the frequency characteristics of a sound absorbing medium, transmission line matrix modeling was used. To input sound absorbing effect in TLM modeling, we added a FIR filter at a node instead of absorbing component using resistance component. There were simulated the characteristics of time-shift, low pass filter, high pass filter using the FIR filter with 7-tap coefficients, then compared with theoretical results. From various simulation results, we could find that added FIR filter coefficient in TLM modeling was an useful way to model a sound absorbing medium.