• Ocean Systems Engineering
• /
• v.6 no.4
• /
• pp.305-324
• /
• 2016

Wave load prediction at zero forward speed using finite depth Green function is a well-established method regularly used in the offshore and marine industry. The forward speed approximation in deep water condition, although with limitations, is also found to be quite useful for engineering applications. However, analysis of vessels with forward speed in finite water depth still requires efficient computing methods. In this paper, a method for analysis of wave induced forces and corresponding motion on freely floating three-dimensional bodies with low to moderate forward speed is presented. A finite depth Green function is developed and incorporated in a 3D frequency domain potential flow based tool to allow consideration of finite (or shallow) water depth conditions. First order forces and moments and mean second order forces and moments in six degree of freedom are obtained. The effect of hull flare angle in predicting added resistance is incorporated. This implementation provides the unique capability of predicting added resistance in finite water depth with flare angle effect using a Green function approach. The results are validated using a half immersed sphere and S-175 ship. Finally, the effect of finite depth on a tanker with forward speed is presented.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.4 no.4
• /
• pp.187-200
• /
• 1992

A general scheme is developed to determine the Langrangian motions of water particles by the Eulerian velocity at their mean positions by using Taylor's theorem. Utilizing the Stokes finite-amplitude wave theory, the orbital motions and the mass transport velocity including the effects of higher-order wave components are determined. The fifth-order approximation of orbital motion gives very good predictions of actual water particle motion in Stokes fifth-order wave theory except near the free-surface. The fifth-order theory predicts the mass transport velocity less than that given by the existing second-order theory over the whole water depth.

• Journal of the Society of Naval Architects of Korea
• /
• v.37 no.4
• /
• pp.11-18
• /
• 2000

This paper is concerned with the generation of an optimal forward hull form by a nonlinear programming method. A Rankine source panel method based on the inviscid and potential flow approximation is employed to calculate the wave-making resistance and SQP method is also used for the optimization. The hull form is represented by a spline function. The forward hull form of a minimum wave resistance with the given design constraints is generated. In addition, the forward hull form of a minimum total resistance by considering the frictional resistance together with an empirical form factor is produced and compared with the former result.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.5
• /
• pp.139-146
• /
• 2009

Parametric array for audio applications is analyzed by numerical modeling and analytical approximation. The nonlinear wave equations are used to provide design guidelines for the audio parametric array. A time domain finite difference code that accurately solves the KZK (Khokhlov-Zabolotskaya-Kuznetsov) nonlinear parabolic wave equation is used to predict the response of the parametric array. The time domain code relates the source size and the carrier frequency to the audible signal response including the output level and beamwidth to considering the implementation issues for audio applications of the parametric array, the emphasis is given to the frequency response and distortion. We use the time domain code to find out the optimal parameters that will help produce the parametric array with highest achievable output in terms of the average power within the demodulated signal. Parameters such as primary input frequency, audio source radius and the modulation method are given utmost importance. The output effect of those parameters are demonstrated through the numerical simulation.

• Nuclear Engineering and Technology
• /
• v.22 no.2
• /
• pp.108-115
• /
• 1990

The measurements of X-ray production cross-sections for 0.5~1.2-MeV proton beam are carried out on Cu and Au. For this experiment, the proton tram generated from the SNU 1.5-MV Tandem Van do Graaff accelerator is Incident on the target. The X-rays and the backscattered protons from the irradiated target are detected simultaneously by the Si(Li) X-ray detector and the SSB (Silicone Surface Barrier) charged particle detector The measured values of X-ray production cross-sections are compared with other experimental values and theoretical values such as the PWBA (Plane Wave Born Approximation) and the ECPSSR(Perturbed Stationary State corrected Energy loss, Coulomb deflection, Relativistic effects) values. For measured cross-sections near 1.0- MeV proton energy, the ECPSSR (D.D. Cohenet al., 1985) shows better agreement than the PWBA. Particularly, that of Au for 1.2 MeV proton beam is 9.69$\pm$ 0.39 barns which deviates from the ECPSSR by less than 5%. and the experimental data for 0.5~1.2- MeV proton agree with most of other experimental values within 30%.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.18 no.5
• /
• pp.35-45
• /
• 1981

An asymptotic solution of electromagnetic waves scattered by a right-angled dielectric wedge for plane wave incidence is obtained. Scattered fields are constructed by waves reflected and refracted from dielectric interfaces (geometric-optical fields) and a cylindrical wave diffracted from the edge. The edge diffracted field is obtained by adding a correction to the edge diffraction of physical optics approximation, where the correction field is calculated by solving a dual series equation amenable to simple numerical calculation. Validity of this result is assured by two limits of relative dielectric constant $\varepsilon$ of the wedge. The total asymptotic field calculated results in a Rawlins' Neumann series solution for small $\varepsilon$, and the edge diffraction pattern is shown to approach that of a perfectly conducting wedge for large $\varepsilon$. Calculated field patterns are presented and the accuracy of physical optics approximation is discussed.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.51 no.3
• /
• pp.405-413
• /
• 2015

Acoustic target strength (TS) measurement and theoretical acoustic scattering models were applied to estimate the TS for assessing the fish biomass. TS measurement was made of ex situ sailfin sandfish Arctoscopus japonicus at 70 and 120 kHz, and then compared to backscatter model prediction. The live sandfish was tethered in seawater using monofilament lines. Measurements were made versus incidence angle, $-50^{\circ}$ to $50^{\circ}$ relative to dorsal aspect directions. Distorted wave Born approximation (DWBA) model was used to calculated TS pattern. The TS values of sandfish (body length: 16.2 cm) at 70 and 120 kHz were -66.94 dB and -64.45 dB, respectively, and were about 20 dB lower than TS of other fishes in Korea waters. These TS levels were distributed within the range of the theoretical TS. Ex situ measurement and theoretical TS may be applied to improve acoustical detection and biomass estimation of the sandfish, and is necessary to measure with various lengths.

• Journal of KIISE:Software and Applications
• /
• v.26 no.10
• /
• pp.1143-1155
• /
• 1999

셀룰러 방식의 이동통신 시스템에서 전파의 유효신호 도달범위를 예측하기 위해서는 전파전파 모델을 이용한 예측기법이 주로 사용된다. 그러나, 전파과정에서 주변 지형지물에 의해 발생하는 전파손실은 매우 복잡한 비선형적인 특성을 가지며 수식으로는 정확한 표현이 불가능하다. 본 논문에서는 신경회로망의 함수 근사화 능력을 이용하여 전파손실 예측모델을 생성하는 방법을 제안한다. 즉, 전파손실을 송수신 안테나간의 거리, 송신안테나의 특성, 장애물 투과영향, 회절특성, 도로, 수면에 의한 영향 등과 같은 전파환경 변수들의 함수로 가정하고, 신경회로망 학습을 통하여 함수를 근사화한다. 전파환경 변수들이 신경회로망 입력으로 사용되기 위해서는 3차원 지형도와 벡터지도를 이용하여 전파의 반사, 회절, 산란 등의 물리적인 특성이 고려된 특징 추출을 통해 정량적인 수치들을 계산한다. 이와 같이 얻어진 훈련데이타를 이용한 신경회로망 학습을 통해 전파손실 모델을 완성한다. 이 모델을 이용하여 서울 도심 지역의 실제 서비스 환경에 대한 타 모델과의 비교실험결과를 통해 제안하는 모델의 우수성을 보인다.Abstract In cellular mobile communication systems, wave propagation models are used in most cases to predict cell coverage. The amount of propagation loss induced by the obstacles in the propagation path, however, is a highly non-linear function, which cannot be easily represented mathematically. In this paper, we introduce the method of producing propagation loss prediction models by function approximation using neural networks. In this method, we assume the propagation loss is a function of the relevant parameters such as the distance from the base station antenna, the specification of the transmitter antenna, obstacle profile, diffraction effect, road, and water effect. The values of these parameters are produced from the field measurement data, 3D digital terrain maps, and vector maps as its inputs by a feature extraction process, which takes into account the physical characteristics of electromagnetic waves such as reflection, diffraction and scattering. The values produced are used as the input to the neural network, which are then trained to become the propagation loss prediction model. In the experimental study, we obtain a considerable amount of improvement over COST-231 model in the prediction accuracy using this model.

• Journal of the Korean Magnetics Society
• /
• v.23 no.4
• /
• pp.117-121
• /
• 2013

In this study we investigated magnetism and magnetostriction of B2-structured FeX (X = Al, Si, Ni, Ga, Ge, and Sn) using a first-principles method, in order to survey the possibility of developing a transition metal based magnetostriction material. The Full-potential Linearized Augmented Plane Wave method was employed for solving the Kohn-Sham equation within the generalized gradient approximation for exchange-correlation interaction between electrons. FeX alloys are stabilized in ferromagnetic states except for the FeSi and FeGe alloys. Magnetostrcition coefficients of FeX (X = Al, Ni, Ga, and Sn) were calculated to be -5, +6, -84, -522ppm, respectively. It is noteworthy that the magnetostriction coefficient (-522ppm) of FeSn is larger than that (+400ppm) of Gafenol.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.3
• /
• pp.140-148
• /
• 2008

In this study, a numerical method for a time-domain acoustic wave backscattering analysis is established based on a physical optics and a Fourier transform. The frequency responses of underwater targets are calculated based on physical optics derived from the Kirchhoff-Helmholtz integral equation by applying Kirchhoff approximation and the time-domain signals are simulated taking inverse fast Fourier transform to the obtained frequency responses. Particularly, the adaptive triangular beam method is introduced to calculate the areas impinged directly by acoustic incident wave and the virtual surface concept is adopted to consider the multiple reflection effect. The numerical analysis result for an acoustic plane wave field incident normally upon a square flat plate is coincident with the result by the analytic time-domain physical optics derived theoretically from a conventional physical optics. The numerical simulation result for a hemi-spherical end-capped cylinder model is compared with the measurement result, so that it is recognized that the presented method is valid when the specular reflection effect is predominant, but, for small targets, gives errors due to higher order scattering components. The numerical analysis of an idealized submarine shows that the established method is effectively applicable to large and complex-shaped underwater targets.