• 한국디지털건축인테리어학회논문집
• /
• 제11권1호
• /
• pp.33-42
• /
• 2011

As the development of construction technology and new materials, building requirements has been varied gadually. Comfortable environment and serviceability of production activity and energy conservation are being dealt with very seriously. Recently localization of engineering technology of Power Plant, however, construction materials and domestic technology are being developed forcingly. According to above topics this thes is going to study roof waterproofing, thermal insulation and evaluate adiabatic performance and evaluation of properties of waterproofing materials and energy conservation. The results of studying and evaluating of roof waterproofing, thermal insulation and adiabatic performance of Power Plant are as follows. 1. Sheet waterproofing method is better than that of asphalt waterproofing method in that adaptability of wearhertight, thermal resistant, contraction and expansion. 2. It is required to replace polyurethane or ethylene used as thermal insulation with rock wool which is noncombustible materials. 3. It is recommended to usd outer insulation method than inner insulation method due to superioty of outer insulation method. Efficiency of insulation materials used in power plant is generally good except perlite mortar used in the power plant(YGN 1-2, GRI 1-2).

• 국제학술발표논문집
• /
• The 6th International Conference on Construction Engineering and Project Management
• /
• pp.101-103
• /
• 2015

Scientific methods that measure the physical demand requirements of a construction operation have not been arrived at maturity in construction community. It is attributed to the difficulty involved in performing controlled experiments on the operation and its' volatile jobsite environment. This paper presents a method that measures the physical demand requirement of the waterproofing activity and verifies the differences between various operations (e.g., a primer painting and a polyurethane coating) consisting of the activity. Two hypotheses, which are involved in the operations, are summarized as follows: [Hypothesis 1] when one performs the same amount of work; the one's average heart rate required for the polyurethane coating operation is higher than that required for the primer painting operation. [Hypothesis 2] when one performs the same amount of work, the one's break time required for the polyurethane coating operation is longer than that required for the primer painting operation.

• Safety and Health at Work
• /
• 제7권1호
• /
• pp.63-71
• /
• 2016

Background: Construction painters have not been studied well in terms of their hazards exposure. The objective of this study was to evaluate the exposure levels of total volatile organic compounds (TVOCs) for painters in the construction industry. Methods: Activity-specific personal air samplings were carried out in three waterproofing activities [polyurethane (PU), asphalt, and cement mortar] and three painting activities (epoxy, oil based, and water based) by using organic-vapor-monitor passive-sampling devices. Gas chromatograph with flame ionization detector could be used for identifying and quantifying individual organic chemicals. The levels of TVOCs, by summing up 15 targeted substances, were expressed in exposure-index (EI) values. Results: As arithmetic means in the order of concentration levels, the EIs of TVOCs in waterproofing works were 10.77, 2.42, 1.78, 1.68, 0.47, 0.07, and none detected (ND) for indoor PU-primer task, outdoor PU-primer task, outdoor PU-resin task, indoor PU-resin task, asphalt-primer task, asphalt-adhesive task, and cement-mortar task, respectively. The highest EI for painting works was 5.61 for indoor epoxyprimer task, followed by indoor epoxy-resin task (2.03), outdoor oil-based-spray-paint task (1.65), outdoor water-based-paint task (0.66), and indoor oil-based-paint task (0.15). Assuming that the operations were carried out continuously for 8 hours without breaks and by using the arithmetic means of EIs for each of the 12 tasks in this study, 58.3% (7 out of 12) exceeded the exposure limit of 100% (EI > 1.0), while 8.3% (1 out of 12) was in 50e100% of exposure limit (0.5 > EI > 1.0), and 4 tasks out of 12 were located in less than 50% of the limit range (EI < 0.5). Conclusion: From this study, we recognized that construction painters are exposed to various solvents, including carcinogens and reproductive toxins, and the levels of TVOC concentration in many of the painting tasks exceeded the exposure limits. Construction workers need to be protected from chemical agents during their painting works by using personal protective devices and/or work practice measures. Additional studies should focus on the exposure assessment of other hazards for construction workers, in order to identify high-risk tasks and to improve hazardous work environments.

• 한국응용과학기술학회지
• /
• 제32권2호
• /
• pp.339-347
• /
• 2015

본 연구는 멀티플 에멀젼(W/O/W) 시스템을 이용하여 개발한 자외선차단 제품의 자외선차단성능의 지속성과 보습효과에 관한 연구이다. 자외선차단용 화장품은 장시간의 외출, 등산, 레포츠 활동을 할 때 필수적으로 사용하는 제품으로 높은 자외선차단효과와 지속성이 요구되고 있다. 또한, 소비자들은 감성공학적인 측면에서 끈적이지 않으며, 내수성이 우수한 제품을 선호하고 있다. 친수성 (O/W타입) 자외선차단제품의 경우, 사용감은 우수하나, 땀이나, 물에 쉽게 지워지기 때문에 완벽한 자외선차단 효과를 기대할 수 없으며, 내수성이 우수한 친유형 (W/O타입) 제품의 경우, 내수성은 우수하나, 끈적임이 심하고, 보습효과가 낮다. 따라서 본 연구에서는 멀티플에멀젼(W/O/W)시스템의 퍼뮬레이션을 개발하여 친수성크림의 부드럽고 촉촉한 사용감을 부여하고 흡수 후에는 내수성이 우수한 W/O 제형으로 변화하여, 우수한 내수성과 자외선차단효과의 지속성을 가지는 고기능성 다중에멀젼의 자외선차단크림을 개발하는 것이 목적이다. 자외선차단크림에 사용된 성분으로 UV-B를 차단하는 원료 에칠헥실메톡시 신나메이트, 이소아밀-p-메톡시신나메이트, 에틸헥실살리실레이트, 옥토크릴렌을 사용하였으며, UV-A차단제로 부틸메톡시디벤조일메탄과 비스에칠헥실옥시페놀 메톡시페닐트리아진을 사용하였다. O/W형 크림의 자외선차단효과를 나타내는 SPF 수치가 34.1, W/O/W형 크림에서는 SPF 수치가 40.6으로, O/W형 크림보다는 19%정도 자외선 차단효과가 상승하는 것으로 나타났다. 4시간 경과 후의 내수성시험에서는 O/W형 크림의 경우 자외선차단효과가 3.6정도로 30.5이상 하락하였으나, 다중에멀젼 시스템에서는 자외선차단효과가 32.7로, 7.9정도 하락하여 81%의 내수성이 있는 것으로 나타났다. 사용 30분 후의 보습효과는 친수성크림이 우수하였으나, 3시간 이후의 보습력은 멀티플에멀젼에서 더욱 높은 보습효과를 보였다.