• 한국건축시공학회지
• /
• 제15권5호
• /
• pp.491-500
• /
• 2015

본 연구에서는 공동주택에서 건설 공사비 증가의 원인이 되는 하자에 대하여 건설업체의 공급자 중심이 아닌, 소비자가 법적인 하자보수 책임기간 만기를 앞두고 안전진단 전문기관에 의뢰하여 얻은 하자진단 결과보고서 자료를 근거로 공종별 하자실태를 조사하였다. 또한, 보수비용적 측면에서 세부요인을 분석하여, 시공단계에서의 품질향상과 하자분쟁 해결의 객관적이며 기초적인 자료를 제시하였다.

• 한국환경보건학회지
• /
• 제36권3호
• /
• pp.208-214
• /
• 2010

Green tobacco sickness (GTS) is an illness associated with nicotine exposures among tobacco harvesters. The purposes of this study were to measure the concentration of nicotine residues on the hands and forearms of tobacco harvesters, and to compare the concentrations according to the harvesting task. Wipe samples from the both hands and forearms were obtained from 16 workers at three sampling times (before work, in the morning after harvesting leaves, and in the afternoon after binding leaves). The geometric means of the right and left hand nicotine levels in harvesting work were 0.70 and $0.61\;{\mu}g/cm^2$, respectively, which were substantial, if significantly lower than the corresponding levels in binding work of 5.19 and $1.50\;{\mu}g/cm^2$ (p=0.016). The overall combined nicotine levels for the hands (i.e., left and right) were significantly higher than those for the forearms (p=0.013). The results of this study therefore indicate that, for GTS prevention, waterproof gloves should be worn while harvesting.

• 토지주택연구
• /
• 제8권3호
• /
• pp.189-200
• /
• 2017

The work breakdown structure and the precedence relations by work activity are very important because they are the basic data for estimating the construction duration in the construction work. However, there is no standard to accurately estimate the construction duration since the size of the school facilities construction is smaller than the general construction work. Therefore, some schools are unable to open in March or September and the delay of the construction duration can cause damage to the students. To solve this problem, this study developed a work breakdown structure of school facilities construction work and analyzed the precedence relations by work activities. The work breakdown structure of the school facilities construction is composed of three steps. The operations corresponding to level 1 and level 2 are as follows. (1) 2 preparatory work categories; preparation period and temporary construction. (2) 17 architectural work categories; temporary construction, foundation & pile work, reinforced concrete work, steel roof work, brick work, plaster work, tile work, stone work, waterproof construction, wood work, interior construction, floor work, metal work, roof work, windows construction, glazing work and paint construction. (3) 7 mechanic and fire work categories; outside trunk line work, plumbing work, air-conditioning equipment work, machine room work, city gas plumbing work, sanitation facilities and inspection & test working. (4) 4 civil work categories; wastewater work, drainage work, pavement work and other work. (5) 1 landscaping work categories; planting work. The work breakdown structure was derived from interviews with experts based on the milestones and detailed statements of existing school facilities. The analysis of precedence relations by school facilities work activity utilized PDM(Precedence Diagramming Method)which does not need a dummy and the relations were applied using FS(Finish to Start), FF(Finish to Finish), SS(Start to Start), SF(Start to Finish). The analysis of this study shows that if one work activity is delayed, the entire construction duration may be delayed because the majority of the works are FS relations. Therefore, it is necessary to use the Lag at the appropriate time to estimate the standard construction duration of the school facility construction. Lag is a term used only in the PDM method and it is used to define the relationship between the predecessor and the successor in creating the network milestone. And it means the delay time applied to the two work activities. The results of this study can reasonably estimate the standard construction duration of school facilities and it will contribute to the quality of the school facilities construction.

• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2007년도 정기총회 및 학술발표대회
• /
• pp.349-352
• /
• 2007

Asphalt overlay resurfacing techniques have been widely utilized in maintaining asphalt concrete in Korea, causing severe traffic congestions while being in construction and difference in level due to the repeated overlay. Besides on these technical difficulties, there have been financial disadvantages associated with technique, mainly because overlay method has been executed for pavements with intact foundations, which is contrary to the norm. This study is aiming to increase the expected life length of the asphalt pavement up to the endurance period, to raise the efficiency of the pavement by maximizing the social benefit and to enhance public character of the street through combining ceramics with epoxy resins, which has advantages in compatibility with the existing pavement materials, durability to abrasion and endurance. It has been expected that the adoption of new method and pavement materials to the actual work sites will develop the performance of the pavements, and to lengthen the durability of the existing materials. The other advantages of the 'thin surfacing' method could be the improved adhesiveness, waterproof, corrosion-proof and bending strength.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 춘계 학술논문 발표대회
• /
• pp.216-217
• /
• 2017

Slag cement or ternary blended cement is mainly used for non-structural lean concrete for the purpose of foundation work or protection of the waterproof layer on the roof of buildings. However, such non-structural lean concrete has a lot of drying shrinkage cracks, which makes it difficult to maintain the quality of the structure. Therefore, in this study, the compressive strength and the drying shrinkage of ternary blended cement(blended of portland cement, blast furnace slag, fly ash from combined heat and power Plant) for non-structural lean concrete were examined. As a result, it was confirmed that this non-structural lean concrete reduced drying shrinkage compared to the conventional ternary blended cement using fly ash from power plant.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2006년도 춘계학술논문 발표대회 제6권1호
• /
• pp.43-46
• /
• 2006

In this study on the appliable Asphalt sheet of monolithic and inorganic matter waterproofing material using of field because of problem of complex waterproofing sheet. Before this cement polymer modified waterproof coating and appliable asphalt sheet of monolithic whether have stability by method of construction about all style waterproofing that evaluate to new method of construction development naturally big emphasis put and try to approach. Did performance test item first at, as a result, drew by suitable thing in all KS items. This is considered to have more effective spot construction work because if means that have stability by material as well as method of construction.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2006년도 춘계학술논문 발표대회 제6권1호
• /
• pp.31-34
• /
• 2006

In this study on the appliable Asphalt sheet of monolithic and inorganic matter waterproofing material using of field because of problem of complex waterproofing sheet. Before this cement polymer modified waterproof coating and appliable asphalt sheet of monolithic whether have stability by method of construction about all style waterproofing that evaluate to new method of construction development naturally big emphasis put and try to approach. Did performance test item first at, as a result, drew by suitable thing in all KS items. This is considered to have more effective spot construction work because if means that have stability by material as well as method of construction.

• 한국재난정보학회 논문집
• /
• 제15권4호
• /
• pp.514-523
• /
• 2019

연구목적: 본 연구는 국내 건설업 분야에 종사하는 외국인 근로자들의 고용안정을 위해 필요한 제도적 개선방안을 마련하고자 하였다. 연구방법: 외국인 근로자 현황을 조사하기 위해 통계청 및 관련 보고서를 분석하였고, 이를 기반으로 한 제도 개선 방안을 마련하였다. 연구결과: 현시비교우위지수(RCA) 분석을 통해 내국인 근로자 대비 외국인 근로자의 기술주준을 평가한 결과 형틀목공, 철근공, 콘크리트공, 석공(타일공), 방수공의 순으로 분석되었다. 결론: 건설업 활성화를 위해 부족한 현장인력 문제를 해결하기 위해 도입된 외국인 근로자 근무제도를 활성화하고 문제점을 개선하기 위해 건설현장에서의 고용허가제 운용을 개선할 필요성과 고용허가제를 도입하는 건설업 규모를 제한할 필요가 있다.

• 한국터널지하공간학회 논문집
• /
• 제19권4호
• /
• pp.669-683
• /
• 2017

본 연구의 목적은 지하 콘크리트 구조물에서 부분적으로 발생하는 누수를 처리하기 위하여 기존에 제안된 전단면 유도배수시스템을 수정하여 제안하는 것이다. 누수된 부분에만 유도배수시스템을 적용하기 위하여 누수된 지하수를 유도배수시스템내에서 집수 지점으로 유도하는 기술과 집수된 지하수를 지하 콘크리트 구조물의 배수 시설로 이동시키기 위한 기술을 추가 제안하였다. 유도배수시스템내로 누수된 지하수를 집수 지점으로 유도하기 위한 4가지 방수 재료들, 즉, 다공질의 고무 재료인 Durkflex, 초강력 접착력을 가진 KE-45 실리콘 접착제, 폴리머 계열 재료인 Hotty-gel 및 일반 실리콘 접착제에 대한 성능 평가를 수행하였다. 방수 재료 Hotty-gel만 완벽한 방수 성능을 보였고 나머지 3가지 방수 재료들에서는 누수가 발생하였다. 선정된 방수 재료 Hotty-gel과 집수 지점에서 배수시설로 누수된 지하수를 이동시키기 위한 배수관 및 고정 새들(saddle)을 추가한 유도배수시스템을 콘크리트 옹벽에서 시험 시공하였다. 재령 7일, 14일, 21일, 28일, 2개월, 및 3개월에 수정된 유도배수시스템 배면에 1,000 ml의 물을 주입하여 방수 성능과 유도배수 성능을 평가하였다. 재령 3개월까지 방수 성능 및 유도배수 성능에는 전혀 이상이 없는 것으로 확인되었다. 수정된 유도배수시스템의 총 공사 기간 및 공사비에 대한 평가를 위하여 표면 정리 단계, 누수 처리 단계 및 단면 복구 단계별로 기존 누수 보수 공법과 비교하였다. 작업 내용, 보수 재료, 시공 장비, 작업 시간, 작업 인원 등을 고려한 개략적인 총 공사 시간 및 공사비에 대하여 비교하였다. 각 시공 단계별로 비교 분석한 결과 수정된 유도배수시스템은 기존의 누수 처리 공법보다 총 공사 기간 및 공사비를 절감할 수 있을 것으로 판단되었다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2002년도 학술.기술논문발표회
• /
• pp.17-22
• /
• 2002

This Waterproofing Material which mainly consisted of 2 components of waste tire chip powder and waste glass powder. This Study is abut development of waterproofing Material, There is not tried in domestic. The most Motive of this Study wishes to recycle resources and get the economic performance for waterproofing Material The result of this Study is as followings. (1) Dense waterproofing floor is formed between waste tire chip by Coupling Agent(the most effective method to encourage adhesive strength and raise cohesion of material by combination.) (2) Expected to bring effect to shorten construction period at spot application potentially space-time in moisture aspect. Also, shortening effect of construction period and spot work are considered to be gone efficiently selecting pre-mix construction method. (3) This development Waterproofing material has elasticity that nature side compatibility of cement ingredient and plastic Emulsion have when utilize and constructs waite resources (being waste tire chip and waste glass powdered).